Abstract:This study demonstrates that adding exfoliated graphene nanoplatelets (XGNPs) and few‐layer graphene (FLG) significantly enhances the electrical and thermal properties of high‐density polyethylene (HDPE), with FLG showing a tenfold increase in conductivity compared to XGNPs. Despite the wide range of applications of polyethylene (PE), many efforts are being made to improve its properties with carbon allotropes such as graphene. The addition of graphene can improve the electrical, thermal, and mechanical properties of this polymer. Through the present study, the effects of exfoliated graphene nanoplatelets (XGNPs) and few‐layer graphene (FLG) on the electrical conductivity and thermal properties of high‐density polyethylene (HDPE) were investigated. XGNPs were synthesized by ultrasonication of graphite nanoplatelets, and FLG was synthesized by shear exfoliation of flake graphite. Finally, HDPE powder particles were coated with dispersed XGNPs and FLG. Then XGNPs/HDPE nanocomposites and FLG/HDPE nanocomposites were fabricated by compression molding. The morphology, structural, electrical, and thermal properties of the graphite, graphene, PE, and nanocomposites were observed and comparatively studied by transmission electron microscopy, field emission scanning electron microscope, x‐ray diffraction (XRD), Raman spectroscopy, and conductivity measurements. The graphene's D, G, and 2D bands were revealed by Raman spectroscopy of nanocomposites and verified the existence of the graphene in the polymer matrix. XRD revealed that the graphene did not affect the original crystalline structure of the HDPE matrix, and the Fourier‐transform infrared spectroscopy revealed that the nanocomposite was obtained without the formation of any functional groups. The electrical properties of the nanocomposites were comparatively studied. After adding XGNPs (7 wt%), volumetric electrical conductivity in a sample reached from 10−16 to 10−3 S/m. The highest volumetric conductivity, 1.1 × 10−2 S/m, that is, semiconductor‐like conductivity, was achieved after adding 7 wt% of FLG. The glass transition temperatures (Tg), melting temperatures (Tm), and thermal stability were investigated by differential scanning calorimetry and TGA, respectively, and it was concluded that Tg and Tm increase by adding the graphene. This study shows that shear exfoliation of graphene is the best and the most facile method to prepare mass‐scale graphene for the production of graphene/polyolefin nanocomposites. Highlights Two types of graphene were produced by using sonication and shear‐exfoliation. HDPE powders were coated with two types of graphene and then hot pressed. The method of (G) preparation is crucialparameter on electrical conductivity. In the sample containing 7 wt% (XGNPs), the highest conductivity is 10−3 S/m. In the sample containing 7 wt% (FLG), the highest conductivity is 10−2 S/m.

High‐performance graphitic nanoplatelets & high‐density polyethylene nanocomposites

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Investigation on mechanical, electrical and morphological of high-density polyethylene (HDPE) reinforced with different particle size and composition of graphene nanoplatelets (GNP)

Fabrication of High-Performance PP/Graphene Nanocomposites Via Friedel–Crafts

Mechanical, thermal, and dynamic compression of high-density polyethylene nanocomposites with graphene, montmorillonite, and calcium carbonate

Preparation of hexene-functionalized graphitic nanoplatelets for effective interaction with Nylon 6

Influence of Reduced Graphene Oxide on the Rheological Response and Chain Orientation on Shear Deformation of High Density Polyethylene

Graphene/polyethylene nanocomposites: Effect of polyethylene functionalization and blending methods

Synergistic Effects of Hybrid Graphitic Nanofillers on Simultaneously Enhanced Wear and Mechanical Properties of Polymer Nanocomposites

Mechanical performance of pe reinforced with graphene nanoplatelets (GNPs): Effect of composition and processing parameters

High density polyethylene hybrid nanocomposites reinforced with carbon nanofiber and nanoclay

Synthesis and Characterization of High‐density Polypropylene‐grafted Polyethylene Via a Macromolecular Reaction and Its Rheological Behavior

Facile fabrication of ultrastrong polyethylene nanocomposite films with low filler content via flow-driven graphene re-dispersion assisted crystallization

HDPE/expanded Graphite Nanocomposites Prepared Via Masterbatch Process

Comprehensive Enhancement in Thermomechanical Performance of Melt-Extruded PEEK Filaments by Graphene Incorporation

A study of the mechanical performance of nanocomposites of polyethylene containing exfoliated boron nitride nanoplatelets

Effect of HDPE-g-MAH on Properties of HDPE/Graphite Thermal Conductive Composites

Influence of exfoliation method of graphene on physical properties of graphene/High Density Polyethylene nanocomposites: Semiconductor‐like electrical conductivity, glass transition, and melting temperature

Innovative hybrid nanocomposites of recycled polyethylene terephthalate/polyamide 11 reinforced with sepiolite and graphene nanoplatelets

Ultrafast Fabrication of Graphene‐Reinforced Nanocomposites via Synergy of Steam Explosion and Alternating Convergent‐Divergent Flow

Optimization of Thermal Conductivity and Tensile Properties of High-Density Polyethylene by Addition of Expanded Graphite and Boron Nitride