Abstract:PurposeEarly detection of gear fault in worm gearbox is a challenging task due to a high reduction in speed and sliding mechanism in its operation. Conventional condition indicators can identify the faults in the worm gearbox to some extent. But in a complex situation consisting of signatures of different health conditions of the gears at different speeds, diagnosis of a specific fault becomes difficult. In view of this, a fault diagnosis scheme has been explored and proposed for identifying worm gearbox defects which is more effective and accurate even under the complex scenario.MethodThe scheme starts with the acquisition of signal from the worm gearbox test rig under three different conditions (healthy, pitting, and missing gear tooth conditions) at three different speeds. Pre-processing of the raw signals is performed using Savitzky–Golay smoothing filter to reduce the noise level in the signal. L-moment ratios are extracted and tested on outlier data. These condition indicators are used in a dendrogram support vector machine (DSVM) as fault features for the classification of faults. Information regarding the location of the fault is extracted from the frequency sidebands at higher harmonics of the gear meshing frequency in the vibration frequency spectrums.ResultsThe L-moment ratios are able to segregate different health conditions of worm gearbox effectively and at the same time are insensitive to the outlier data which has occurred by chance. The use of the L-moment ratios in the proposed scheme results in the test decoding accuracy (fault classification) of DSVM as 100% in place of 88.8% while using conventional condition indicators. The higher order of accuracy makes it capable of classifying the faults even under complex situations. The sidebands at higher harmonics of the gear meshing frequency reveal information about the location of the fault in the worm gearbox.ConclusionThe proposed scheme is capable in classifying the different health conditions (such as healthy, pitting, and missing tooth conditions) of the worm gearbox from the jumble of data at different values of stabilized speeds, and different loading conditions. The information of the sidebands associated with higher harmonics of the gear meshing frequency in the frequency spectrum helps in locating the presence of the fault on the specific gear elements of the gearbox.

Early pitting fault detection for polymer gears using kurtosis-VMD based condition indicators

Supervised Machine Learning Based Approach for Early Fault Detection in Polymer Gears Using Vibration Signals

A New Hybrid LSTM-GRU Model for Fault Diagnosis of Polymer Gears Using Vibration Signals

A Mechanical Fault Detection Strategy Based on the Doubly Iterative Empirical Mode Decomposition

Early Detection of Industrial-Scale Gear Tooth Surface Pitting Using Vibration Analysis

L-Moments Ratio-Based Condition Indicators for Diagnosis of Fault in a Worm Gearbox

New procedure for gear fault detection and diagnosis using instantaneous angular speed

Rotating machinery early fault detection integrating variational mode decomposition and multiscale singular value decomposition

Evolutional development & design of an adjustable single gear tooth testing procedure for polymer gearing

VMD based trigonometric entropy measure: a simple and effective tool for dynamic degradation monitoring of rolling element bearing

Crack detection of powder metal and steel gears

Gear fault detection based on instantaneous frequency estimation using variational mode decomposition and permutation entropy under real speed scenarios

Modified Lagrangian Formulation of Gear Tooth Crack Analysis using Combined Approach of Variable Mode Decomposition (VMD) and Time Synchronous Averaging (TSA)

Early Fault Detection of Planetary Gearbox Based on Acoustic Emission and Improved Variational Mode Decomposition

Dynamical modeling of spur gear with pitting based on image processing tooth surface

Vold-Kalman Generalized Demodulation For Multi-Faults Detection Of Gear And Bearing Under Variable Speeds

Rolling Bearing Incipient Fault Detection via Optimized VMD Using Mode Mutual Information

Gear fault diagnosis using Autogram analysis

Customized Multiwavelets for Planetary Gearbox Fault Detection Based on Vibration Sensor Signals.

Early Fault Diagnosis of Rotating Machinery by Combining Differential Rational Spline-Based LMD and K–L Divergence

A novel performance degradation assessment method for rotating machinery based on the fault information and the dynamic simulation