Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Practical Circuit-Based Design Approach for Waveguide Lowpass Filter With Extremely Steep Skirt Response

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Design of multilayer triangular substrate integrated waveguide filter in LTCC

Substrate-Integrated Waveguide Bandpass Filters with Planar Resonators for System-on-Package

A Substrate-Integrated Evanescent-Mode Waveguide Filter with Nonresonating Node in Low-Temperature Co-Fired Ceramic

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Compact quasi-elliptic bandpass filter based on folded ridge substrate integrated waveguide (FRSIW)

Compact cross-coupled circular cavity filters using multilayer substrate integrated waveguide

Broadband Filter Based on Stub-Loaded Ridge Substrate Integrated Waveguide (SIW) in Low Temperature Cofired Ceramic (LTCC)

Miniaturized and High-Selectivity Substrate Integrated Waveguide (SIW) Bandpass Filter Loaded by Complementary Split-Ring Resonators (Csrrs)

Novel Bandpass Filters by Using Cavity-Loaded Dielectric Resonators in A Substrate Integrated Waveguide

Compact and High Steep Skirts Hybrid Heterogeneous Integrated N77 Full band BAW Filter Based on Band-stop Theory

Compact Coplanar Waveguide Low-Pass Filter Using a Novel Electromagnetic Bandgap Structure

Modeling and Analyzing High-Order Modes in Periodic-Stub-Loaded Stripline for Wideband Filter Design

Design of Wide Stopband for Waveguide Low-Pass Filter Based on Circuit and Field Combined Analysis

A Class of Box-Like Bandpass Filters with Wide Stopband Based on New Dual-Mode Rectangular SIW Cavities

Integrated Broadband Filter with Sharp Transition Edges Based on SiN and SiON Composite Waveguide Coupler

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Design of a Compact and Low-Loss E-Band Filter Based on Multilayer Groove Gap Waveguide

Integrated substrate groove gap waveguide and application for filter design