Abstract:The micro-electro-mechanical system (MEMS) gyroscope is a micro-mechanical gyroscope with low cost, small volume, and good reliability. The working principle of the MEMS gyroscope, which is achieved through Coriolis, is different from traditional gyroscopes. The MEMS gyroscope has been widely used in the fields of micro-inertia navigation systems, military, automotive, consumer electronics, mobile applications, robots, industrial, medical, and other fields in micro-inertia navigation systems because of its advantages of small volume, good performance, and low price. The material characteristics of the MEMS gyroscope is very significant for its data output, and the temperature determines its accuracy and limits its further application. In order to eliminate the effect of temperature, the MEMS gyroscope needs to be compensated to improve its accuracy. This study proposed an improved variational modal decomposition-extreme learning machine (VMD-ELM) algorithm based on convolutional neural networks-long short-term memory (CNN-LSTM) and particle swarm optimization-support vector machines (PSO-SVM). By establishing a temperature compensation model, the gyro temperature output signal is optimized and reconstructed, and the gyro output signal with better accuracy is obtained. The VMD algorithm separates the gyro output signal and divides the gyro output signal into low-frequency signals, mid-frequency signals, and high-frequency signals according to the different signal frequencies. Once again, the PSO-SVM model is constructed by the mid-frequency temperature signal to find the temperature error. Finally, the signal is reconstructed through the ELM neural network algorithm, and then, the gyro output signal after noise is obtained. Experimental results show that, by using the improved method, the output of the MEMS gyroscope ranging from -40 to 60 °C reduced, and the temperature drift dramatically declined. For example, the factor of quantization noise (Q) reduced from 1.2419 × 10-4 to 1.0533 × 10-6, the factor of bias instability (B) reduced from 0.0087 to 1.8772 × 10-4, and the factor of random walk of angular velocity (N) reduced from 2.0978 × 10-5 to 1.4985 × 10-6. Furthermore, the output of the MEMS gyroscope ranging from 60 to -40 °C reduced. The factor of Q reduced from 2.9808 × 10-4 to 2.4430 × 10-6, the factor of B reduced from 0.0145 to 7.2426 × 10-4, and the factor of N reduced from 4.5072 × 10-5 to 1.0523 × 10-5. The improved algorithm can be adopted to denoise the output signal of the MEMS gyroscope to improve its accuracy.

Low-cost MEMS gyroscope performance improvement under unknown disturbances through deep learning-based array

Design and Test of MEMS Gyroscope Control System Based on LMSD

Error Modeling and Filtering Method for MEMS Gyroscope

Identification and Suppression of Driving Force Misalignment Angle for a MEMS Gyroscope Using Parametric Excitation

A Combined Method for MEMS Gyroscope Error Compensation Using a Long Short-Term Memory Network and Kalman Filter in Random Vibration Environments

Performance Improvement for MEMS Gyroscopes by Suppressing the Circuit Phase Delay

Noise Analysis and Modeling for a Digital Control Architecture for Lissajous Frequency-Modulated MEMS Gyroscope with Amplitude-Modulated Readout

A MEMS IMU Gyroscope Calibration Method Based on Deep Learning

Improved VMD-ELM Algorithm for MEMS Gyroscope of Temperature Compensation Model Based on CNN-LSTM and PSO-SVM

Optimal Compensation of MEMS Gyroscope Noise Kalman Filter Based on Conv-DAE and MultiTCN-Attention Model in Static Base Environment

MEMS Gyroscope Multi-Feature Calibration Using Machine Learning Technique

Noise Reduction of MEMS Gyroscope Based on Direct Modeling for an Angular Rate Signal

The method of MEMS gyroscope random error compensation based on ARMA

A New Dual-Mass MEMS Gyroscope Fault Diagnosis Platform

A MEMS IMU De-Noising Method Using Long Short Term Memory Recurrent Neural Networks (LSTM-RNN)

An Adaptive Filtering Approach Based on the Dynamic Variance Model for Reducing MEMS Gyroscope Random Error

Modeling the Random Drift of Micro-Machined Gyroscope with Neural Network

Research on MEMS Gyroscope Random Error Compensation Algorithm Based on ARMA Model

Analysis Of The Improvement In Accuracy Using Multiple Gyros

A Novel Parallel Processing Model for Noise Reduction and Temperature Compensation of MEMS Gyroscope

Modeling And Compensation Of Random Drift Of Mems Gyroscopes Based On Least Squares Support Vector Machine Optimized By Chaotic Particle Swarm Optimization