Abstract:Numerical simulations are used to investigate the effect of variation of the aspect ratio and the structure of pitching motions on the energy extraction efficiency and wake topology of flapping foils. The central aim is to predict the energy extraction performance and efficiency of a flapping-foil-based energy harvesting system (EHS) in realistic working conditions with finite aspect ratios. A sinusoidal heaving motion is imposed upon the foil, as well as both a sinusoidal pitching motion and a variety of trapezoidal-like periodic pitching motions. The simulations employ a finite-volume method with body-fitted moving grids, allowing the capture of flow structure near the foil surface. A detailed analysis of the hydrodynamic performance shows two peaks per periodic cycle in the lift force time histories or equivalently, the energy extraction time histories. The first primary peak corresponds to an effective angle of attack around 15.4°, indicating good attachment of the flow on the foil surface without significant flow separation. The secondary peak corresponds to a leading edge vortex (LEV) travelling on the foil surface. The shape of the LEV is altered markedly as the aspect ratio varies, and consequently the secondary peak in the lift force time history is strongly affected by the effects of three-dimensionality for foils with smaller aspect ratios. By examining the relationship between energy extraction efficiency and aspect ratio, a critical aspect ratio of AR = 4 is identified for sinusoidal pitching motions, below which the three-dimensional low-aspect-ratio characteristics dominate the flow evolution. Therefore, the compromise between higher energy extraction efficiency and lower costs of manufacturing and installation suggests that an aspect ratio around AR = 4 is the most appropriate choice for a real EHS. Furthermore, although trapezoidal-like pitching motions are known to improve the efficiency in flows restricted to two dimensions, particularly for non-optimal angle of attack, the efficiency of such flows is even more strongly affected by three-dimensional motions, with substantial efficiency loss even for AR = 8. This suggests that the implementation of efficiency improvement strategies obtained by two-dimensional studies should be treated with caution when extended to real three-dimensional flows.

Improvement of the power extraction performance of a semi-active flapping airfoil by employing two-sided symmetric slot airfoil

Performance enhancement of a semi-active flapping foil energy harvester via airfoil with modified trailing edge and jet flap

Effects of Non-Sinusoidal Pitching Motion on Energy Extraction Performance of A Semi-Active Flapping Foil

Numerical Study on the Energy Extraction Performance by Flapping Foils in a Density Stratified Flow

Numerical study on the energy extraction characteristics of a flapping foil with movable lateral flaps

Influence of suction flow control on energy extraction characteristics of flapping foil

Enhancing output characteristics of semi-active flapping airfoil energy capture device via flexible deformation strategy

Optimization of the double-slot blown airfoil with jet at the leading and trailing edges of the flap

Numerical study on a novel flapping-foil energy harvester with 2D vortex generator

Enhanced Power Extraction via Hybrid Pitching Motion in an Oscillating Wing Energy Harvester with Leading Flap

Numerical Modeling on Hydrodynamic Performance of A Bottom-Hinged Flap Wave Energy Converter

Effect of Aspect Ratio on the Energy Extraction Efficiency of Three-Dimensional Flapping Foils

Exploring the mechanisms behind dual-peak formation in energy harvesting efficiency of semi-passive flapping airfoils with varied spring stiffness

Improvement of NACA6309 Airfoil with Passive Air-Flow Control by using Trailing Edge Flap

Research on energy harvesting characteristics of a flapping foil with trailing edge jet flap

Numerically Investigating the Energy-Harvesting Performance of an Oscillating Flat Plate with Leading and Trailing Flaps

Hydrodynamic performance improvement on the hydrofoil using slotted configurations

Novel optimized layout for flettner rotors based on reuse of wake energy

EXPERIMENTAL POWER AUGMENTATION RESEARCH OF SMALL HORIZONTAL AXIS WIND TURBINE

Aerodynamic Performance of a Flyable Flapping Wing Rotor With Passive Pitching Angle Variation

Numerical Simulation of 2D Airfoil Lift Enhancement with Flaps