Abstract:The potential of Fiber Reinforced Polymer (FRP) in the reinforcement of concrete structures has been shown in many studies and practical applications. However, few works have focused systematically on the development of quantitative criteria to measure surface roughness and relate this parameter to the bonding mechanical property. Moreover, some researchers have declared that, if the concrete interface is rougher, the bond performance between FRP and concrete will be increase, However, there is no answer to how rough the surface is. There are limited application standards for engineers to conduct in FRP reinforcement projects. This work evaluated several concrete specimens with three different strengths and six types of interface roughness. A single shear test was conducted to study the influence of surface roughness on the interfacial bonding performance of a carbon fiber-reinforced composite (CFRP)-concrete beam. The results show that, among the six interfaces, a concrete interface with the roughness of 0.44 has the best interfacial bonding performance. An interfacial appearance with the cement mortar almost cleaned away, and almost one fifth of the single coarse aggregate bared will get the best bond performance. Roughness parameters significantly influenced the effective bond length. The effective bond length of the six interfaces experienced an overall decreasing trend as the roughness increased. The bond–slip curves of concrete interfaces with roughness of 0.25–0.44 did not significantly change the rigidity within the brittle region. The rougher the interface was, the shorter the brittle region was. After entering a plasticity stage, the bond–slip curves for the six types of interfaces all declined with different slopes, and the max slip values were 0.04–0.35 mm when debonding failure occurred.

The effect of surface roughness on direct wafer bonding

Role of humidity and surface roughness on direct wafer bonding

Multiscale Modelling of Bitumen-Aggregate Interfaces from Molecular Debonding to Pull-off Strength

Influence of Adherend Surface Roughness on the Adhesive Bond Strength

Adhesion quantification methods for wafer bonding

Bulk and Interfacial Contributions to the Debonding Mechanisms of Soft Adhesives: Extension to Large Strains

Surface Wettability Effect on Aqueous Lubrication: Van Der Waals and Hydration Force Competition Induced Adhesive Friction

Effect of Combined Hydrophilic Activation on Interface Characteristics of Si/Si Wafer Direct Bonding

Effects of Surface Roughness on Interface Bonding Performance for 316H Stainless Steel in Hot-Compression Bonding

Effect of surface texture on the mechanical performance of bonded joints: a review

Study on Effects of Pre-Treatment and Surface Roughness on Tensile-Shear Strength of 2060 Al–Li Alloy Adhesive Joints

Interfacial properties for real rough MEMS/NEMS surfaces by incorporating the electrostatic and Casimir effects-a theoretical study

Characterization of Irregularly Micro-Structured Surfaces Related to Their Wetting Properties

Microslip and energy dissipation behaviors of bonding interface considering rough morphology

Influence of Roughness on Shear Bonding Performance of CFRP-Concrete Interface

Effects of Surface Roughness Obtained by Milling on Interface Bonding Quality for 316H during Metal Additive Forging

On the Atomic Roughness of Solid–vapor Interfaces: Significance of Many-Body Interactions

Atomistic understanding of rough surface on the interfacial friction behavior during the chemical mechanical polishing process of diamond

Influence of raw material surface roughening on the lap shearing strength and failure behavior of adhesively bonded aluminum joints

Role of surface morphology in wafer bonding

Roughness-Induced Wetting