Recent advances in the design of colorimetric sensors for environmental monitoring

Bin Liu,Jinyin Zhuang,Gang Wei

DOI: https://doi.org/10.1039/d0en00449a

2020-01-01

Abstract:Colorimetric sensors fabricated via nanomaterials and nanotechnology exhibited promising applications in environmental science.

What problem does this paper attempt to address?

Colorimetric Sensors for Chemical and Biological Sensing Applications

Yu Wu,Jing Feng,Guang Hu,En Zhang,Huan-Huan Yu

DOI: https://doi.org/10.3390/s23052749

IF: 3.9

2023-03-03

Sensors

Abstract:Colorimetric sensors have been widely used to detect numerous analytes due to their cost-effectiveness, high sensitivity and specificity, and clear visibility, even with the naked eye. In recent years, the emergence of advanced nanomaterials has greatly improved the development of colorimetric sensors. This review focuses on the recent (from the years 2015 to 2022) advances in the design, fabrication, and applications of colorimetric sensors. First, the classification and sensing mechanisms of colorimetric sensors are briefly described, and the design of colorimetric sensors based on several typical nanomaterials, including graphene and its derivatives, metal and metal oxide nanoparticles, DNA nanomaterials, quantum dots, and some other materials are discussed. Then the applications, especially for the detection of metallic and non-metallic ions, proteins, small molecules, gas, virus and bacteria, and DNA/RNA are summarized. Finally, the remaining challenges and future trends in the development of colorimetric sensors are also discussed.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Colorimetric biosensing using smart materials.

Yujun Song,Weili Wei,Xiaogang Qu

DOI: https://doi.org/10.1002/adma.201101853

IF: 29.4

2011-01-01

Advanced Materials

Abstract:In recent years, colorimetric biosensing has attracted much attention because of its low cost, simplicity, and practicality. Since color changes can be read out by the naked eye, colorimetric biosensing does not require expensive or sophisticated instrumentation and may be applied to field analysis and point-of-care diagnosis. For transformation of the detection events into color changes, a number of smart materials have been developed, including gold nanoparticles, magnetic nanoparticles, cerium oxide nanoparticles, carbon nanotubes, graphene oxide, and conjugated polymers. Here, we focus on recent developments in colorimetric biosensing using these smart materials. Along with introducing the mechanisms of color changes based on different smart materials, we concentrate on the design of biosensing assays and their potential applications in biomedical diagnosis and environmental monitoring.
Recent Advances in Design and Application of Nanomaterials-Based Colorimetric Biosensors for Agri-food Safety Analysis

Jiaojiao Zhou,Yuantao Liu,Xiaoping Du,Yue Gui,Jiangling He,Fang Xie,Jie Cai

DOI: https://doi.org/10.1021/acsomega.3c06409

IF: 4.1

2023-12-19

ACS Omega

Abstract:A colorimetric sensor detects an analyte by utilizing the optical properties of the sensor unit, such as absorption or reflection, to generate a structural color that serves as the output signal to detect an analyte. Detecting the refractive index of an analyte by recording the color change of the sensor structure on its surface has several advantages, including simple operation, low cost, suitability for onsite analysis, and real-time detection. Colorimetric sensors have drawn much attention...

chemistry, multidisciplinary
A Microfluidic-Colorimetric Sensor for Continuous Monitoring of Reactive Environmental Chemicals

Rui Wang,Amlendu Prabhakar,Rodrigo A. Iglesias,Xiaojun Xian,Xiaonan Shan,Francis Tsow,Erica S. Forzani,Nongjian Tao

DOI: https://doi.org/10.1109/jsen.2011.2174218

IF: 4.3

2012-01-01

IEEE Sensors Journal

Abstract:Colorimetry is a powerful sensing principle that detects a target analyte based on a reaction-induced color change. The approach can be highly sensitive and selective when a sensing material that reacts specifically with the analyte is found, but the specific reaction is usually accompanied by slow recovery and irreversibility, making continuous monitoring of air quality difficult. Consequently, colorimetry is often one-time only and single-point measurement. To overcome the difficulty, the present work reports a combined microfluidic and colorimetric approach that measures time evolution of a color gradient along a microfluidic channel via a complementary metal-oxide-semiconductor (CMOS) imager. The change of the color gradient provides continuous monitoring of the analyte concentration over many hours, and the principle and capability of the approach is demonstrated by theoretical simulation, and experimental validation with real samples.
Colorimetric Biosensing Using Smart Materials

Yujun Song,Weili Wei,Xiaogang Qu

DOI: https://doi.org/10.1002/adma.201101853

2011-01-01

Advances in Materials

Abstract:In recent years, colorimetric biosensing has attracted much attention because of its low cost, simplicity, and practicality. Since color changes can be read out by the naked eye, colorimetric biosensing does not require expensive or sophisticated instrumentation and may be applied to field analysis and point‐of‐care diagnosis. For transformation of the detection events into color changes, a number of smart materials have been developed, including gold nanoparticles, magnetic nanoparticles, cerium oxide nanoparticles, carbon nanotubes, graphene oxide, and conjugated polymers. Here, we focus on recent developments in colorimetric biosensing using these smart materials. Along with introducing the mechanisms of color changes based on different smart materials, we concentrate on the design of biosensing assays and their potential applications in biomedical diagnosis and environmental monitoring.
Recent advances in nanomaterials for colorimetric cancer detection

Haixia Wang,Tingting Wu,Mingqiang Li,Yu Tao

DOI: https://doi.org/10.1039/d0tb02163f

IF: 7.571

2021-01-01

Journal of Materials Chemistry B

Abstract:Colorimetric cancer detection based on nanomaterials is comprehensively overviewed including the sensing principles, targeted biomarkers, emerging nanomaterials and advanced strategies.

materials science, biomaterials
Recent advances in colorimetric sensors based on nanozymes with peroxidase-like activity

Zhongmei Chi,Qiong Wang,Jiali Gu

DOI: https://doi.org/10.1039/d2an01850k

2023-01-31

Abstract:Nanozymes have been widely used to construct colorimetric sensors due to their advantages of cost-effectiveness, high stability, good biocompatibility, and ease of modification. The emergence of nanozymes greatly enhanced the detection sensitivity and stability of the colorimetric sensing platform. Recent significant research has focused on designing various sensors based on nanozymes with peroxidase-like activity for colorimetric analysis. However, with the deepening of research, nanozymes with peroxidase-like activity has also exposed some problems, such as weak affinity and low catalytic activity. In view of the above issues, existing investigations have shown that the catalytic properties of nanozymes can be improved by adding surface modification and changing the structure of nanomaterials. In this review, we summarize the recent trends and advances of colorimetric sensors based on several typical nanozymes with peroxidase-like activities, including noble metals, metal oxides, metal sulfides/metal selenides, and carbon and metal-organic frameworks (MOF). Finally, the current challenges and prospects of colorimetric sensors based on nanozymes with peroxidase-like activity are summarized and discussed to provide a reference for researchers in related fields.
Recent Developments in Nanomaterial Optical Sensors

JJ Shi,YF Zhu,XR Zhang,WRG Baeyens,AM Garcia-Campana

DOI: https://doi.org/10.1016/s0165-9936(04)00519-9

IF: 14.908

2004-01-01

TrAC Trends in Analytical Chemistry

Abstract:The application of nanomaterials in the field of optical sensors has become a new, growing area of interest in recent years. We review chemical sensors that apply the optical principles of nanomaterials to the determination of chemical and biochemical analytes. We mainly focus on the changes of spectral absorbance, photoluminescence (PL) and chemiluminescence (CL) phenomena induced by the interaction between nanomaterials and various analytes.
Advances in colorimetric aptasensors for heavy metal ion detection utilizing nanomaterials: a comprehensive review

Jiangxiong Zhu,Danfeng Wang,Hong Yu,Hao Yin,Lumei Wang,Guoqing Shen,Xueqing Geng,Linnan Yang,Yongcheng Fei,Yun Deng

DOI: https://doi.org/10.1039/d3ay01815f

IF: 3.1

2023-11-16

Analytical Methods

Abstract:Heavy metal ion contamination poses significant environmental and health risks, necessitating rapid and efficient detection methods. In the last decade, colorimetric aptasensors have emerged as powerful tools for heavy metal ion detection, owing to their notable attributes such as high specificity, facile synthesis, adaptability to modifications, long-term stability, and heightened sensitivity. This comprehensive overview summarizes the key developments in this field over the past ten years. It discusses the principles, design strategies, and innovative techniques employed in colorimetric aptasensors using nanomaterials. Recent advancements in enhancing sensitivity, selectivity, and on-site applicability are highlighted. The review also presents application studies of successful heavy metal ion detection using colorimetric aptasensors, underlining their potential for environmental monitoring and health protection. Finally, future directions and challenges in the continued evolution of these aptasensors are outlined.

spectroscopy,chemistry, analytical,food science & technology
Recent Advances in Nanomaterial‐Enabled Wearable Sensors: Material Synthesis, Sensor Design, and Personal Health Monitoring

Bo Peng,Fengnian Zhao,Jianfeng Ping,Yibin Ying

DOI: https://doi.org/10.1002/smll.202002681

IF: 13.3

2020-09-06

Small

Abstract:<p>Wearable sensors have gained much attention due to their potential in personal health monitoring in a timely, cost‐effective, easy‐operating, and noninvasive way. In recent studies, nanomaterials have been employed in wearable sensors to improve the sensing performance in view of their excellent properties. Here, focus is mainly on the nanomaterial‐enabled wearable sensors and their latest advances in personal health monitoring. Different kinds of nanomaterials used in wearable sensors, such as metal nanoparticles, carbon nanomaterials, metallic nanomaterials, hybrid nanocomposites, and bio‐nanomaterials, are reviewed. Then, the progress of nanomaterial‐based wearable sensors in personal health monitoring, including the detection of ions and molecules in body fluids and exhaled breath, physiological signals, and emotion parameters, is discussed. Furthermore, the future challenges and opportunities of nanomaterial‐enabled wearable sensors are discussed.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Integration of nanomaterials for colorimetric immunoassays with improved performance: a functional perspective

Wenshu Zheng,Xingyu Jiang

DOI: https://doi.org/10.1039/c5an02222c

2016-01-01

The Analyst

Abstract:The boom of nanotechnology has yielded exciting developments in designing new kinds of colorimetric immunoassays.
Nanomaterial enabled sensors for environmental contaminants

Marjorie R. Willner,Peter J. Vikesland

DOI: https://doi.org/10.1186/s12951-018-0419-1

IF: 10.2

2018-11-22

Journal of Nanobiotechnology

Abstract:The need and desire to understand the environment, especially the quality of one’s local water and air, has continued to expand with the emergence of the digital age. The bottleneck in understanding the environment has switched from being able to store all of the data collected to collecting enough data on a broad range of contaminants of environmental concern. Nanomaterial enabled sensors represent a suite of technologies developed over the last 15 years for the highly specific and sensitive detection of environmental contaminants. With the promise of facile, low cost, field-deployable technology, the ability to quantitatively understand nature in a systematic way will soon be a reality. In this review, we first introduce nanosensor design before exploring the application of nanosensors for the detection of three classes of environmental contaminants: pesticides, heavy metals, and pathogens.

biotechnology & applied microbiology,nanoscience & nanotechnology
Colorimetric and Fluorescent Biosensors Based on Directed Assembly of Nanomaterials with Functional DNA

Juewen Liu,Yi Lu

DOI: https://doi.org/10.1007/978-0-387-73711-9_6

2009-01-01

Abstract: This chapter reviews recent progress in the interface between functional nucleic acids and nanoscale science and technology, and its analytical applications. In particular, the use of metallic nanoparticles as the color reporting groups for the action (binding, catalysis, or both) of aptamers, DNAzymes, and aptazymes is described in detail. Because metallic nanoparticles possess high extinction coefficients and distance-dependent optical properties, they allow highly sensitive detections with minimal consumption of materials. The combination of quantum dots (QDs) with functional nucleic acids as fluorescent sensors is also described. The chapter starts with the design of colorimetric and fluorescent sensors responsive to single analytes, followed by sensors responsive to multiple analytes with controllable cooperativity and multiplex detection using both colorimetric and fluorescent signals in one pot, and ends by transferring solution-based detections into litmus paper type of tests, making them generally applicable and usable for a wide range of on-site and real-time analytical applications such as household tests, environmental monitoring, and clinical diagnostics.
Colorimetric sensing for translational applications: from colorants to mechanisms

Zhicheng Jin,Wonjun Yim,Maurice Retout,Emily Housel,Wenbin Zhong,Jiajing Zhou,Michael S. Strano,Jesse V. Jokerst

DOI: https://doi.org/10.1039/d4cs00328d

IF: 46.2

2024-06-06

Chemical Society Reviews

Abstract:Colorimetric sensing offers instant reporting via visible signals. Versus labor-intensive and instrument-dependent detection methods, colorimetric sensors present advantages including short acquisition time, high throughput screening, low cost, portability, and a user-friendly approach. These advantages have driven substantial growth in colorimetric sensors, particularly in point-of-care (POC) diagnostics. Rapid progress in nanotechnology, materials science, microfluidics technology, biomarker discovery, digital technology, and signal pattern analysis has led to a variety of colorimetric reagents and detection mechanisms, which are fundamental to advance colorimetric sensing applications. This review first summarizes the basic components ( e.g. , color reagents, recognition interactions, and sampling procedures) in the design of a colorimetric sensing system. It then presents the rationale design and typical examples of POC devices, e.g. , lateral flow devices, microfluidic paper-based analytical devices, and wearable sensing devices. Two highlighted colorimetric formats are discussed: combinational and activatable systems based on the sensor-array and lock-and-key mechanisms, respectively. Case discussions in colorimetric assays are organized by the analyte identities. Finally, the review presents challenges and perspectives for the design and development of colorimetric detection schemes as well as applications. The goal of this review is to provide a foundational resource for developing colorimetric systems and underscoring the colorants and mechanisms that facilitate the continuing evolution of POC sensors.

chemistry, multidisciplinary
Eye-Readable and Wearable Colorimetric Sensor Arrays for In Situ Monitoring of Volatile Organic Compounds

Zhiheng You,Mingming Zhao,Huizi Lu,Huayun Chen,Yixian Wang

DOI: https://doi.org/10.1021/acsami.4c00312

IF: 9.5

2024-04-04

ACS Applied Materials & Interfaces

Abstract:Wearable sensors utilize changes in color as a response to physiological stimuli, making them easily recognizable by the naked eye. These colorimetric wearable sensors offer benefits such as easy readability, rapid responsiveness, cost-effectiveness, and straightforward manufacturing techniques. However, their applications in detecting volatile organic compounds (VOCs) in situ have been limited due to the low concentration of complex VOCs and complicated external interferences. Aiming to address...

materials science, multidisciplinary,nanoscience & nanotechnology
Recent Advances in Electrochemical Sensor and Biosensors for Environmental Contaminants

Li-Ping Mei,Pei Song,Yuan-Cheng Zhu,Yi-Fan Ruan,Xiao-Mei Shi,Wei-Wei Zhao,Jing-Juan Xu,Hong-Yuan Chen

DOI: https://doi.org/10.1007/978-3-030-45116-5_1

2020-01-01

Abstract:Nowadays, environmental pollution issues exist all over the world in different levels and have attracted increasing attention. The sensitive and selective sensing of environmental contaminants is of great value for human health and well-being as well as maintenance of the ecosystem balance. On the basis of various recognition elements, electrochemical sensors and biosensors have been widely used as effective analytical tools to achieve the accurate detection of various pollutants. This chapter introduces the fabrication and principle of electrochemical sensors and biosensors with different electrode materials, and also summarizes their applications toward the detection of environmental contaminants in recent 5 years.
Functional Nucleic Acid-Directed Assembly of Nanomaterials and Their Applications as Colorimetric and Fluorescent Sensors for Trace Contaminants in Water

Debapriya Mazumdar,Juewen Liu,Yi Lu

2014-01-01

Abstract:Largely due to the high extinction coefficients and distance-dependent optical properties, metallic nanoparticles and quantum dots have been shown to be very attractive in DNA-related colorimetric and fluorescent assays, respectively. We have used DNAzymes (DNA molecules with catalytic activities) for directed assembly of gold nanoparticles and its application as colorimetric sensors for metal ions such as lead. This methodology has been expanded to an even broader range of molecules by using aptamers (nucleic acid-based binding molecules obtained through systematic evolution of ligands by exponential enrichment (SELEX)). We have developed a general sensor design method that is simple to design, easy to operate and gives fast color change with minimal materials consumption. To demonstrate the generality, sensors for adenosine and cocaine have been designed, both of which can produce color changes in seconds and at room temperature. Since no special feature on the aptamers is required, the design should be able to be used for any molecule of choice. Finally, to make the operation even easier to use and less venerable to errors, we have demonstrated dipsticks tests for a broad range of contaminants in water. These and other recent advances in this area will be summarized.
A Comprehensive Review on Upconversion Nanomaterials-Based Fluorescent Sensor for Environment, Biology, Food and Medicine Applications

Wei Jiang,Jiaqi Yi,Xiaoshuang Li,Fei He,Na Niu,Ligang Chen

DOI: https://doi.org/10.3390/bios12111036

2022-11-18

Biosensors

Abstract:Near-infrared-excited upconversion nanoparticles (UCNPs) have multicolor emissions, a low auto-fluorescence background, a high chemical stability, and a long fluorescence lifetime. The fluorescent probes based on UCNPs have achieved great success in the analysis of different samples. Here, we presented the research results of UCNPs probes utilized in analytical applications including environment, biology, food and medicine in the last five years; we also introduced the design and construction of upconversion optical sensing platforms. Future trends and challenges of the UCNPs used in the analytical field have also been discussed with particular emphasis.
Progress of gold nanomaterials for colorimetric sensing based on different strategies

Lili Yu,Zhaorui Song,Jun Peng,Manli Yang,Hao Zhi,Hua He

DOI: https://doi.org/10.1016/j.trac.2020.115880

IF: 14.908

2020-06-01

TrAC Trends in Analytical Chemistry

Abstract:<p>The development of nanotechnology promotes the progress of analytical methods, especially gold nanomaterials, which have attracted much interest due to their unique optical properties. As they display different colors depending on their size, shape and state of aggregation, it provides excellent platforms for the development of colorimetric sensors in chemical and biological field. For better understanding the significant role of gold nanomaterials in modern science, it becomes increasing necessary to summarize a review on colorimetric application of gold nanomaterials in sensing. In this review, differently, it proceed from four main strategies, centers on different form of gold nanomaterials, and revolves around its development in the chemical and biological field with a wide range of applications. Finally, this review discusses the main disadvantages of the present and the promising prospects of gold nanomaterials as colorimetric sensors. It will be of significant benefit to to further facilitate the design of novel colorimetric sensors.</p>

chemistry, analytical
Recent advances in single-atom nanozymes for colorimetric biosensing

Zhaoyuan Lyu,Jiachi Zhou,Shichao Ding,Dan Du,Joseph Wang,Yun Liu,Yuehe Lin

DOI: https://doi.org/10.1016/j.trac.2023.117280

IF: 14.908

2023-11-01

TrAC Trends in Analytical Chemistry

Abstract:Recently, single-atom catalysts (SACs) and nanozymes (SANs) have emerged and flourished in the field of catalysis due to their exceptional atom utilization efficiency and high catalytic performance, thereby paving the way for amplified biosensing capabilities. Contrasted with natural enzymatic counterparts, SANs offer numerous advantages including robust catalytic activity, facile production, and cost-effectiveness, thus holding immense potential for deployment in colorimetric biosensing applications. Notably, SANs demonstrate enhanced catalytic efficiency and selectivity in comparison to conventional nanozymes. This review article comprehensively overviews the latest advancements in SANs-based biosensing platforms specifically tailored for colorimetric bioanalytical applications. Besides, strategies to improve the enzyme-like activity of SANs are discussed. Finally, the paper addresses extant challenges and delineates prospective avenues for the advancement of SAN-based biosensing technologies. The insights and perspectives presented herein are anticipated to provide valuable guidance in comprehending the enzyme-like catalytic activity of SANs and in designing SANs tailored to augment biosensing functionalities.

chemistry, analytical

Recent advances in the design of colorimetric sensors for environmental monitoring

Colorimetric Sensors for Chemical and Biological Sensing Applications

Colorimetric biosensing using smart materials.

Recent Advances in Design and Application of Nanomaterials-Based Colorimetric Biosensors for Agri-food Safety Analysis

A Microfluidic-Colorimetric Sensor for Continuous Monitoring of Reactive Environmental Chemicals

Colorimetric Biosensing Using Smart Materials

Recent advances in nanomaterials for colorimetric cancer detection

Recent advances in colorimetric sensors based on nanozymes with peroxidase-like activity

Recent Developments in Nanomaterial Optical Sensors

Advances in colorimetric aptasensors for heavy metal ion detection utilizing nanomaterials: a comprehensive review

Recent Advances in Nanomaterial‐Enabled Wearable Sensors: Material Synthesis, Sensor Design, and Personal Health Monitoring

Integration of nanomaterials for colorimetric immunoassays with improved performance: a functional perspective

Nanomaterial enabled sensors for environmental contaminants

Colorimetric and Fluorescent Biosensors Based on Directed Assembly of Nanomaterials with Functional DNA

Colorimetric sensing for translational applications: from colorants to mechanisms

Eye-Readable and Wearable Colorimetric Sensor Arrays for In Situ Monitoring of Volatile Organic Compounds

Recent Advances in Electrochemical Sensor and Biosensors for Environmental Contaminants

Functional Nucleic Acid-Directed Assembly of Nanomaterials and Their Applications as Colorimetric and Fluorescent Sensors for Trace Contaminants in Water

A Comprehensive Review on Upconversion Nanomaterials-Based Fluorescent Sensor for Environment, Biology, Food and Medicine Applications

Progress of gold nanomaterials for colorimetric sensing based on different strategies

Recent advances in single-atom nanozymes for colorimetric biosensing