Abstract:Accumulating space debris edges the space domain ever closer to cascading Kessler syndrome, a chain reaction of debris generation that could dramatically inhibit the practical use of space. Meanwhile, a growing number of retired satellites, particularly in higher orbits like geostationary orbit, remain nearly functional except for minor but critical malfunctions or fuel depletion. Servicing these ailing satellites and cleaning up "high-value" space debris remains a formidable challenge, but active interception of these targets with autonomous repair and deorbit spacecraft is inching closer toward reality as shown through a variety of rendezvous demonstration missions. However, some practical challenges are still unsolved and undemonstrated. Devoid of station-keeping ability, space debris and fuel-depleted satellites often enter uncontrolled tumbles on-orbit. In order to perform on-orbit servicing or active debris removal, docking spacecraft (the "Chaser") must account for the tumbling motion of these targets (the "Target"), which is oftentimes not known a priori. Accounting for the tumbling dynamics of the Target, the Chaser spacecraft must have an algorithmic approach to identifying the state of the Target's tumble, then use this information to produce useful motion planning and control. Furthermore, careful consideration of the inherent uncertainty of any maneuvers must be accounted for in order to provide guarantees on system performance. This study proposes the complete pipeline of rendezvous with such a Target, starting from a standoff estimation point to a mating point fixed in the rotating Target's body frame. A novel visual estimation algorithm is applied using a 3D time-of-flight camera to perform remote standoff estimation of the Target's rotational state and its principal axes of rotation. A novel motion planning algorithm is employed, making use of offline simulation of potential Target tumble types to produce a look-up table that is parsed on-orbit using the estimation data. This nonlinear programming-based algorithm accounts for known Target geometry and important practical constraints such as field of view requirements, producing a motion plan in the Target's rotating body frame. Meanwhile, an uncertainty characterization method is demonstrated which propagates uncertainty in the Target's tumble uncertainty to provide disturbance bounds on the motion plan's reference trajectory in the inertial frame. Finally, this uncertainty bound is provided to a robust tube model predictive controller, which provides tube-based robustness guarantees on the system's ability to follow the reference trajectory translationally. The combination and interfaces of these methods are shown, and some of the practical implications of their use on a planned demonstration on NASA's Astrobee free-flyer are additionally discussed. Simulation results of each of the components individually and in a complete case study example of the full pipeline are presented as the study prepares to move toward demonstration on the International Space Station.

Synchronous flying-around control for uncontrolled tumbling spacecraft

Distance Based Prescribed Performance Switched Control for Spacecraft Flying Around Mission

Position and Attitude Separation Control for Tiltable Quadrotors: an Appointed-Time Prescribed Performance Anti-Disturbance Approach

Non-cooperative spacecraft proximity control considering target behavior uncertainty

Reinforcement learning strategy for spacecraft attitude hyperagile tracking control with uncertainties

Orbit and Attitude Control of Spacecraft Formation Flying

Stabilization Control for Spacecraft-manipulator System After Capturing Tumbling Target

Dynamics and Control for Contactless Interaction Between Spacecraft and Tumbling Debris

Concurrent Proximity Control of Servicing Spacecraft with an Uncontrolled Target

Position and attitude tracking control for a quadrotor UAV

Robust relative orbit synchronization for spacecraft cluster: A distributed learning sliding mode control approach

Observer-based fixed-time continuous nonsingular terminal sliding mode control of quadrotor aircraft under uncertainties and disturbances for robust trajectory tracking: Theory and experiment

Orbit–attitude dynamics and control of spacecraft hovering over a captured asteroid in the earth–moon system

Nonlinear adaptive pose motion control of a servicer spacecraft in approximation with an accelerated tumbling target

Attitude optimization control of hypersonic flight vehicle considering partially unknown control direction

Global fast dynamic terminal sliding mode control for a quadrotor UAV

Velocity‐free Coordinated Attitude Synchronisation and Tracking Control of Multiple Spacecraft

Robust Attitude Control for Rapid Multi-Target Tracking in Spacecraft Formation Flying

Hybrid Control Scheme for Grasping a Non-Cooperative Tumbling Satellite

Detumbling of Underactuated Tethered Satellite System Based on Hierarchical Sliding Mode Control

A Robust Observation, Planning, and Control Pipeline for Autonomous Rendezvous with Tumbling Targets