Abstract:Off-line programming of the polishing tool trajectory for complex workpieces is challenging due to the nontrivial material removal model and the polishing accuracy requirement. Current tool trajectory planning methods are mainly developed for some simple surfaces but cannot handle the increasingly complicated industrial parts, such as the wheel hubs. This article first develops a numerical contact mechanics model for the point-sampled complex workpieces. The contact pressure distribution and the material removal depths on the workpiece point cloud can be predicted efficiently. A novel high-priority subregion searching algorithm is developed to track the most-worth-polishing workpiece points. By selecting the path pattern as direction-parallel, the path direction, tool dwell times, and the path spacings inside each extracted subregion are optimized to minimize the deviation from the desired material removal depths. The effectiveness of the proposed method is verified by performing disk polishing simulations on workpieces with different shapes. A robotic polishing experiment is also conducted on a wheel hub. Both simulation and experimental results show that reasonable tool trajectories can be generated on the workpiece, and the desired material removal depths can be achieved. Note to Practitioners—In robotic polishing industries, it is crucial to plan the tool trajectory (tool path and feed velocity) to achieve desired material removal depths on the workpiece surface, which means high surface quality. In this article, a model-based tool trajectory planning method for robotic polishing of complex surfaces that are represented by the point cloud form is presented. The advantage of using the point cloud is that workpiece surfaces with varying curvatures and complex features, e.g., grooves and holes, need not be expressed explicitly. The proposed method generates high-priority subregions according to the updated material removal distribution dynamically. In this work, the polishing path pattern is chosen as direction-parallel. Based on an efficient numerical contact mechanics and material removal model, the path locations and the tool dwell times inside each subregion are optimized to minimize the deviation between the actual and the desired material removal depths. When the desired material removal depths are attained in an extracted subregion, the algorithm finds the next high-priority subregion until the whole workpiece is well polished. The trajectory planning method can be integrated into an industrial robot with the force-control module. Future work is to integrate the roughness model into the tool trajectory planning method.

Automatic surface roughing with 3D machine vision and cooperative robot control

Robot Automatic Polishing Technology of Curved Parts Based on Adaptive Impedance Control

Modeling, Planning, and Control of Robotic Grinding on Free-Form Surface Using a Force-Controlled Belt Grinding Tool

Adaptive Human-Robot Collaboration for Robotic Grinding of Complex Workpieces

Robotic Abrasive Belt Grinding of Complex Curved Blades Based on a Novel Force Control Architecture Integrating Smooth Trajectories

Worn area modeling for automating the repair of turbine blades

Human-Robot Collaboration for Unknown Flexible Surface Exploration and Treatment Based on Mesh Iterative Learning Control.

A Robotic Solution for Precision Smoothing and Roughening of Precast Concrete Surfaces: Design and Experimental Validation

Path Planning under Force Control in Robotic Polishing of the Complex Curved Surfaces

Development of an Autonomous Sanding Robot with Structured-Light Technology

RoboGrind: Intuitive and Interactive Surface Treatment with Industrial Robots

Based on Monocular Vision of the Robot Coordinate for Grinding Surface Within the Establishment

Automatic Surface Polishing Based on Probe Measurement and Force-Position Decoupling Control

Pose Optimization and Tool Path Planning for Robotic Grinding of Complicated Curved Surface

Automatic Generation of Interference-Free and Posture-Smooth Toolpath for Robotic Belt Grinding of Complex Workpieces

Robotic Grinding and Polishing of Complex Aeroengine Blades Based on New Device Design and Variable Impedance Control

An Adaptive Robotic Constant Force Polishing System for Turbine Blade

Robot 3D sculpturing based on extracted NURBS.

A Model-Based Trajectory Planning Method for Robotic Polishing of Complex Surfaces.

Path Planning For Automatic Robotic Blade Grinding

Robotic Polishing of Free-Form Surfaces With Controlled Force and Effective Path Planning