Cinnamon Bark Oil as an Effective Fungicide in Protecting the Surface of Wood-Based Softboards against the Development of Mold Fungi

Izabela Betlej,Bogusław Andres,Krzysztof Krajewski,Piotr Borysiuk,Jerzy Szakiel,Mateusz Kowalski,Renata Salerno-Kochan,Maciej Balawejder,Tomasz Cebulak,Radosław Auriga,Katarzyna Rybak

DOI: https://doi.org/10.3390/coatings14040433

IF: 3.236

2024-04-05

Coatings

Abstract:Porous wood-based boards, like any lignocellulosic material, are susceptible to biocorrosion caused by mold fungi. Their durability can be extended by using biocides. Due to the fact that porous boards are considered an ecological material, it would be beneficial to also use natural agents to protect them. For this purpose, the surface of softboards was protected with a 30% solution of cinnamon bark oil in ethanol. Three application levels were used: 75 g/m2, 120 g/m2, and 200 g/m2 of solution. It has been shown that the cinnamon bark oil solution used at an application rate of 200 g/m2 is an effective fungicide, protecting softboards (SBs) against the development of mold fungi: T. viride and C. globosum. The dominant volatile component of cinnamon oil identified in the boards turned out to be cinnamaldehyde. Three months after treatment, this substance constituted 74% of the volatile components. The proposed treatment method allows for short-term preventive protection of boards against mold fungi.

materials science, multidisciplinary,physics, applied, coatings & films

What problem does this paper attempt to address?

The paper primarily explores the effectiveness of cinnamon bark oil as a natural biocide in protecting the surface of wooden softboards from mold growth. Specifically, the study addresses the following key issues:

1. **Background and Need**: Wooden materials, especially porous wooden softboards (such as those used as base materials for flooring or panels), are prone to mold infestation. To extend the lifespan of such materials, biocides are commonly used for treatment. However, considering environmental and health factors, finding biocides from natural sources has become particularly important.

2. **Research Objectives**:
- Demonstrate that cinnamon bark oil can be successfully used by wood protection product manufacturers as a biocide to protect material surfaces from mold infestation, serving as an alternative to synthetic biocides.
- Propose a method for protecting the surface of hard-to-impregnate porous boards (wooden softboards).

3. **Experimental Design**: Researchers used a 30% cinnamon oil solution (dissolved in ethanol) to spray-treat wooden softboards, testing three different application levels (75 grams/square meter, 120 grams/square meter, 200 grams/square meter). This method was used to evaluate the effect of different concentrations of cinnamon bark oil on inhibiting the growth of two common molds (*Trichoderma viride* and *Chaetomium globosum*).

4. **Results**: The study found that at an application level of 200 grams/square meter, the cinnamon bark oil solution effectively inhibited mold growth. This effect was observed at 24 hours, two weeks, and three months post-treatment, with the highest application level showing the most significant results. Additionally, it was found that the main volatile component in cinnamon oil—cinnamaldehyde—still accounted for 74% of the volatile components in the third month after treatment.

In summary, this paper aims to validate the effectiveness and feasibility of cinnamon bark oil as a natural biocide, particularly in its application for protecting porous materials like wooden softboards from mold infestation.