Abstract:Lignin is an abundant source of aromatics with low effective hydrogen-to-carbon ratio (H/Ceff), and the depolymerization of lignin provides significant potential for producing liquid products with an improved H/Ceff value. In this work, the catalytic conversion of lignin monomers, dimer, trimers, and realistic lignin over spherical MOF-derived catalysts was well established, to get liquid fuels with a higher H/Ceff. The optimal ratio of the catalyst exhibited good hydrodeoxygenation activity and stability for the hydrotreatment of lignin model compounds and lignin. The addition of Mo facilitated the decrease of the particle size of a spherical structure, strengthened the electron-transfer capability between metals Mo and Ni, and enhanced the acid strength. All of these factors contributed to higher hydrodeoxygenation activity in the hydrotreatment process. Up to 100% conversion and 90% yields of ethylcyclohexane and cyclohexanol with H/Ceff values of 2.0 and 1.667, respectively, were obtained. The catalyst achieved a decrease of the oxygen element and an increase of H/Ceff and HHV values. The physicochemical characterizations were performed by various means including X-ray diffraction (XRD), scanning electronic microscopy (SEM), transmission electron microscopy (TEM), H2-temperature-programmed reduction (H2-TPR), NH3-temperature-programmed desorption (NH3-TPD), pyridine-infrared spectroscopy (Py-IR), inductively coupled plasma emission spectrometer (ICP), and Raman and X-ray photoelectron spectroscopy (XPS) analyses, which definitely elucidated the formation of a synergistic effect between metals Mo and Ni. Additionally, a control experiment also illustrated the synergistic effect that facilitated the occurrence of the hydrotreatment process under lower temperatures after the addition of metal Mo. Based on the optimal reaction condition (240 °C, 4 h, 2.0 MPa H2), both lignin and its monomers/dimers/trimers could be effectively hydrotreated to afford liquid products with improved H/Ceff value compared to raw lignin.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c05273.Py-IR spectra of different catalysts (Figure S1); mass balance of hydrogenation under the optimal reaction condition (Figure S2); GC-MS results and product distributions of bio-oil from different lignin feedstocks (Figure S3); and recycling experiments of different lignin feedstocks (Table S1) (PDF)This article has not yet been cited by other publications.

Ionic liquid coupled with nickel salt for enhancing the hydro-liquefaction efficiency of the major biomass components

Advances in Catalytic Transformations of Carbohydrates and Lignin in Ionic Liquids and Mechanistic Studies

Ionic liquid dissolution utilized for biomass conversion into biofuels, value-added chemicals and advanced materials: A comprehensive review

Recent Progress on Bimetallic Catalysts for the Production of Fuels and Chemicals from Biomass and Plastics by Hydrodeoxygenation

Catalytic Conversion of Lignin to Liquid Fuels with an Improved H/C eff Value over Bimetallic NiMo-MOF-Derived Catalysts

Efficient catalytic liquefaction of organosolv lignin over transition metal supported on HZSM-5

Deoxy-Liquefaction of Laminaria Japonica to High-Quality Liquid Oil over Metal Modified Zsm-5 Catalysts

Green mechano-chemical processing of lignocellulosic biomass for lignin recovery

An in-situ combo Mo-based ionic liquid and SAPO-11 catalyst for efficient biolipids hydrodeoxygenation and isomerization

Co-treatment of swine manure and lignocellulosic biomass by liquefaction: parameter optimization, product characterization, reaction mechanism

Ionic liquid—a future solvent for the enhanced uses of wood biomass

Hydrothermal Liquefaction Conversion of Lignocelluloses and waste Biomass Using Zeolite Catalyst

Catalytic depolymerization of Kraft lignin towards liquid fuels over bifunctional molybdenum oxide based supported catalyst

[C4h8so3hmim]hso4 As an Efficient Catalyst for Direct Liquefaction of Bagasse Lignin: Decomposition Properties of the Inner Structural Units

Synergism of ionic liquids and lipases for lignocellulosic biomass valorization

The ionic liquids upon perchlorate to promote the C-C/C-O bonds cleavage in alkali lignin under photothermal synergism

Promotion of biomass pyrolytic saccharification and lignin depolymerization via nucleophilic reagents quenching of the carbonium ions

Hydrodeoxygenation of Lignin-Derived Phenols into Alkanes by Using Nanoparticle Catalysts Combined with Brønsted Acidic Ionic Liquids.

Dehydration of Xylose to Furfural in Butanone Catalyzed by Brønsted‐Lewis Acidic Ionic Liquids

Ni-based Multifunctional Catalysts derived from layered double hydroxides for Catalytic conversion of Cellulose to Polyols

Selective Separation and Recovery of the Lignin from Lignocellulosic Biomass Using Ionic Liquid