Abstract:Despite there being many reports on SnO2-based anode materials, most of the electrode materials are tested in half cells using lithium metal with unlimited lithium-ion sources as the counter electrode, which may conceal the real properties of these composites to a certain extent. In this study, a ternary SnO2-Co-C composite was fabricated by a scalable ball milling strategy. The composite exhibited high initial Coulombic efficiency (ICE, > 80%), a large capacity (similar to 900 mA h g(-1)) and superior cycling stability (capacity retention more than 99% after 100 cycles) in half cells. Furthermore, coin-type full cells in which the ternary SnO2 -Co-C anodes were paired with different cathodes were demonstrated. A LiFePO4 vertical bar vertical bar SnO2-Co-C full cell tested at 0.5-3.4 V exhibited an ICE of 75.1% and an initial discharge capacity of 906 mA h g(-1), which were close to those of the SnO2-Co-CIILi half cells. By analyzing the cycling performance and characteristics of the charge/discharge process for the full cells with different capacity ratios of cathode/anode, it was confirmed that the capacity decay of the full cells was due to the continuous consumption of Li+ ions during cycling. Hence, the testing voltage windows were adjusted according to the lithiation/de-lithiation behavior of the SnO2. On this basis, the LiFePO4 vertical bar vertical bar SnO2-Co-C full cells tested at 2.3-3.4 V and the LiCoO2 vertical bar vertical bar SnO2-Co-C full cells tested at 2.60-3.75 V exhibited excellent cycling stability, demonstrating 80.3% and almost 100% capacity retention after 100 cycles, respectively, thereby laying a foundation for the practical application of advanced SnO2-based anodes in lithium-ion batteries. (C) 2020 Elsevier Ltd. All rights reserved.

Thermodynamically Anti-Agglomeration Based Selenium-Doped Tin Oxide Network: Enhancing Cycling Stability of high-rate lithium storage

Construction of Robust Solid-Electrolyte Interphase via Electrode Additive for High-Performance Sn-Based Anodes of Sodium-Ion Batteries

Metallic Tin Nanoparticle-Reinforced Tin-Doped Porous Silicon Microspheres with Superior Electrochemical Lithium Storage Properties

Focus on Lithiation Kinetics of Selenium-Doped NiO@C Electrodes with Multistage Pore Structure

Dual Immobilization of SnOx Nanoparticles by N-Doped Carbon and TiO2 for High-Performance Lithium-Ion Battery Anodes.

Unraveling the Atomic-Level Manipulation Mechanism of Tin-Based Ternary Anodes Via Hetero-Anion Engineering for Stable Sodium Ion Storage

Interfacial Coupling SnSe2/SnSe Heterostructures as Long Cyclic Anodes of Lithium‐Ion Battery

Dual-doping for enhancing chemical stability of functional anionic units in sulfide for high-performance all-solid-state lithium batteries

High-rate, Long Cycle-Life Li-ion Battery Anodes Enabled by Ultrasmall Tin-Based Nanoparticles Encapsulation

Confining homogeneous Ni0.5Co0.5Se2 nanoparticles in Ti3C2T MXene architectures for enhanced sodium storage performance

The Synergistic Effects of Nanoporous Fiber TiO2 and Nickel Foam Interlayer for Ultra-Stable Performance in Lithium-Selenium Batteries

Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

In Situ Implanting Fine ZnSe Nanoparticles into N-doped Porous Carbon Nanosheets As an Exposed Highly Active and Long-Life Anode for Lithium-Ion Batteries

Good Cycling Stability and High Initial Efficiency Demonstrated in Full Cells with Limited Lithium Source for an Advanced SnO2–Co–C Composite Anode

Silica-modified SnO2-graphene “slime” for Self-Enhanced Li-Ion Battery Anode

Gradient selenium-doping regulating interfacial charge transfer in zinc sulfide/carbon anode for stable lithium storage

Li2CO3 Induced Stable SEI Formation: an Efficient Strategy to Boost Reversibility and Cyclability of Li Storage in SnO2 Anodes

Fully Reversible Lithium Storage of Tin Oxide Enabled by Self-Doping and Partial Amorphization.

Reversible formation of metastable Sn-rich solid solution in SnO<sub>2</sub>-based anode for high-performance lithium storage

Enhanced Structure Stability and Electrochemical Performance of LiNiO2 by Li2SeO4 Coating and Gradient Surface SeO32−/ SeO42− Doping

Optimized crystal orientation for enhanced reaction kinetics and reversibility of SnSe/NC hollow nanospheres towards high-rate and long-term lithium/sodium storage