Effect of Vulcanization on the Electro-Mechanical Sensing Characteristics of Multi-Walled Carbon Nanotube/Silicone Rubber Composites

Bangwei Wan,Yang Yang,Rongxin Guo,Zhengming Fan,Peng Deng,Shibo Zhang

DOI: https://doi.org/10.3390/polym15061412

IF: 5

2023-03-13

Polymers

Abstract:In order to realize effective monitoring for the working performance of seismic isolation structures, a multi-walled carbon nanotube (MWCNT)/methyl vinyl silicone rubber (VMQ) composite was prepared via mechanical blending using dicumyl peroxide (DCP) and 2,5-dimethyl-2,5-di(tert-butyl peroxy)hexane (DBPMH) as vulcanizing agents. The effects of the different vulcanizing agents on the dispersion of the MWCNT, electrical conductivity, mechanical properties, and resistance–strain response of the composites were investigated. The experimental results showed that the percolation threshold of the composites prepared with the two vulcanizing agents was low, while the DCP-vulcanized composites showed high mechanical properties and a better resistance–strain response sensitivity and stability, especially after 15,000 loading cycles. According to the analysis using scanning electron microscopy and Fourier infrared spectroscopy, it was found that the DCP contributed higher vulcanization activity, a denser cross-linking network, better and uniform dispersion, and a more stable damage–reconstruction mechanism for the MWCNT network during the deformation load. Thus, the DCP-vulcanized composites showed better mechanical performance and electrical response abilities. When employing an analytical model based on the tunnel effect theory, the mechanism of the resistance–strain response was explained, and the potential of this composite for real-time strain monitoring for large deformation structures was confirmed.

polymer science

What problem does this paper attempt to address?

This paper aims to address the effective monitoring of the working performance of seismic isolation structures. Specifically, the study prepared composites consisting of multi-walled carbon nanotubes (MWCNT) and methyl vinyl silicone rubber (VMQ) through a mechanical mixing method, and investigated the effects of different vulcanizing agents (dicumyl peroxide [DCP] and 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane [DBPMH]) on the dispersion of MWCNT, electrical conductivity, mechanical properties, and resistive strain response.

The research results indicate that both vulcanizing agents can achieve a relatively low percolation threshold for the composites, but the DCP-vulcanized composites exhibit higher mechanical properties and better sensitivity and stability in resistive strain response, especially after 15,000 loading cycles. Scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR) analyses show that DCP provides higher vulcanization activity, a denser cross-linked network, and more uniform MWCNT dispersion, as well as a more stable damage-reconstruction mechanism under deformation loads. An analytical model based on the tunneling effect theory explains the resistive strain response mechanism and confirms the potential of this composite material for real-time strain monitoring in large deformation structures.