Tuning Magnetocaloric Effect of a Mn-Cr-Sb-Ga alloy by the Nonvolatile Residual Strain of a Ti-Ni Shape Memory Alloy

Fei Cheng,Sai Ma,Yu Wang,Xiaoqing Ke,Jingmin Wang,Sen Yang
DOI: https://doi.org/10.1016/j.actamat.2021.116849
IF: 9.4
2021-05-01
Acta Materialia
Abstract:<p>The multiferroic composites with a layer of magnetocaloric materials (MCMs) on a piezoelectric substrate have recently been developed to tune the magnetocaloric effect (MCE) through the stress from the piezoelectric substrate, which could help achieve high-efficiency and miniaturized refrigeration. The small strain of piezoelectric substrates is sufficient to tune the MCE of alloys whose transformation temperature (<em>T<sub>M</sub></em>) is sensitive to the external stress. However, it might not work effectively for those <em>stress-insensitive</em> MCMs, which are also important MCMs with considerable MCE and small hysteresis. In this paper, we design a new composite with a Mn<sub>1.95</sub>Cr<sub>0.05</sub>Sb<sub>0.95</sub>Ga<sub>0.05</sub> ribbon on a Ti<sub>50</sub>Ni<sub>50</sub> shape-memory-alloy substrate. The Ti<sub>50</sub>Ni<sub>50</sub> substrate can provide much larger nonvolatile stress than a piezoelectric substrate, which thus successfully tunes the MCE of the Mn<sub>1.95</sub>Cr<sub>0.05</sub>Sb<sub>0.95</sub>Ga<sub>0.05</sub>, despite its low stress sensitivity. With a 2% residual strain of the Ti<sub>50</sub>Ni<sub>50</sub> substrate, <em>T</em><sub>M</sub> of the Mn<sub>1.95</sub>Cr<sub>0.05</sub>Sb<sub>0.95</sub>Ga<sub>0.05</sub> is increased by ∼6 K, which ∼7.5 times that (0.8 K) achieved via a Mn<sub>1.95</sub>Cr<sub>0.05</sub>Sb<sub>0.95</sub>Ga<sub>0.05</sub>/PMN-PT composite. With different residual strains of Ti<sub>50</sub>Ni<sub>50</sub> substrate from 0% to 2%, a wide working temperature window of 31 K is obtained at a low magnetic field of 1 T. Moreover, this composite exhibits an almost constant refrigeration capacity and a small hysteresis of 4.9 K under different stress, which promotes homogeneous heat transfer and improves the working efficiency. This work provides an effective method to tune the MCE of both <em>stress-sensitive</em> and <em>stress-insensitive</em> MCMs, which could be used in miniaturized refrigerators.</p>
materials science, multidisciplinary,metallurgy & metallurgical engineering
What problem does this paper attempt to address?