Abstract:Research is devoted to the development of ideas about the mechanism of the flow of corrosion currents through the structures of railway tracks and buildings and the justification of methods of their protection against electrical corrosion. As a result of theoretical studies and field tests, the electric circuits of the leakage currents from the pulsating unidirectional electric potential of the POEP, which arise during the passage of the electric rolling stock along the electrified direct current railway tracks, have been clarified. Current carriers are installed in the elements and structures of the track and buildings. In concrete, soil, which are conductors of the second kind, these carriers are mainly cations Ca2+, Na+, anions OH-. It was found that in reinforced concrete sleepers, supports of passenger platforms due to the influence of POEP, zones of neutralization and leaching of concrete, cathode and anode zones of steel reinforcement are formed. Corresponding chemical and electrochemical reactions of leaching and carbonization of lime, oxidation of iron, etc. occur in these zones. It is proposed to prevent corrosion processes in these zones by diverting currents with grounded screens-coatings made of electrically conductive compositions based on mineral binders -Portland cement with a complex chemical additive or sodium silicate and a filler - dispersed graphite. The proposed indicator of the effectiveness of these screens-coatings, which is the degree of reduction of the current strength through the structure. As a result of experimental studies, it was established that it depends on the share of the contact area of the steel grounding device with the screen from the area of the screen itself, and the corresponding dependencies were obtained. New methods of protecting track structures and structures from electrical corrosion are substantiated, and appropriate structural and technological solutions are developed.

Anti-corrosion coatings for protection of steel railway structures exposed to atmospheric environments: A review

The Evolution of the Corrosion Mechanism of Structural Steel Exposed to the Urban Industrial Atmosphere for Seven Years

Corrosion of rail tracks and their protection

A Review of Recent Developments in Coating Systems for Hot-Dip Galvanized Steel

DEVELOPMENT OF IDEAS ABOUT ELECTRICAL CORROSION OF RAILWAY TRACK STRUCTURES AND IMPROVEMENT OF THEIR PROTECTION METHODS USING ELECTRICALLY CONDUCTIVE COMPOSITIONS

Steel Bridge-Coating Systems and Their Environmental Impacts: Current Practices and Future Trends

Corrosive Environment Factors and their Influence on the Development of Weathering Steel Corrosion Products

A Review on Conducting Polymers and Nanopolymer Composite Coatings for Steel Corrosion Protection

Influencial mechanisms of elements and alloy phases on corrosion resistance of Zn-Al-Mg coated steel in atmospheric environments: A review

Review of Atmospheric Corrosion of Zinc and Zinc Alloy

A review on corrosion detection and protection of existing reinforced concrete (RC) structures

Influence mechanism of different elements and alloy phases on the corrosion resistance of Zn-Al-Mg coated steel in the atmospheric environment: A review

Anti-Corrosion Reinforcements Using Coating Technologies—A Review

Corrosion Processes on Weathering Steel Bridges Influenced by Deposition of De-Icing Salts

Review on Atmospheric Corrosion of Copper and Copper Alloys

Review of laser cladding coating on wear and fatigue of railway wheels/rails

Analytical Review of Conductive Coatings, Cathodic Protection, and Concrete

Corrosion performance of a corrosion-resistant rail steel in the simulated subsea tunnel environment

A Critical Review on Corrosion and Runoff from Zinc and Zinc-Based Alloys in Atmospheric Environments

Review of Cr-Free Coatings for the Corrosion Protection of Aluminum Aerospace Alloys