Abstract:Common cause failures (CCFs) may lead to the simultaneous unavailability or failure of numerous components in the nuclear power plant because of the existence of a shared cause when an initiating event disrupts the normal functioning of nuclear power plants. The presence of common cause failures (intra-unit and inter-unit) can be recognized in a multi-unit probabilistic safety assessment (MUPSA) as a crucial dependency factor that can influence accident scenarios and the core damage frequency (CDF), as CCF may affect the availability and proper operation of mitigating systems. Since such failures are likely to significantly undermine the benefits of the concept of redundancy in nuclear power plant systems, it is necessary to identify the CCFs that contribute to the core damage in a multi-unit site and analyse their overall quantitative magnitude and qualitative proportions. In this study, a twin-unit generic pressurized water reactor (PWR) nuclear plant is modeled using the AIMS-PSA software. For the loss-of-offsite-power (LOOP) and station blackout (SBO) events, the site CDF was calculated, and the cut-sets produced by this quantification were examined for the modeled CCF basic events in the fault trees. The quantitative and qualitative contributions of the CCFs to the frequency of site core damage were examined. CCFs in the modeled fault trees contributed to 4.58% to the site CDF of the combined LOOP followed by SBO event. In the LOOP event alone that leads to core damage, the CCF contributed 4.58% to the site CDF while CCFs contributed 17.19% to the site CDF in the SBO event alone that leads to core damage. With CCF events considered in the modeling process, the site CDF estimated with CCF events increased by 7.53% in the combined LOOP followed by SBO event. In the LOOP event alone that leads to core damage, inclusion of CCF events in the modeling increased the site CDF by 7.42%. A 15.66% increase in site CDF was recorded in the SBO event alone that leads to core damage as compared to modeling without CCF events. The results show how crucial the common cause failure contribution is to site CDF. The safety of the nuclear plant at a site is impacted by an increase in site CDF when common cause failures are considered. The various CCF fundamental event compositions and their percentage contributions were explicitly examined by the minimal cut-sets which leads to core damage in the units. In conclusion, this study's findings can help us better understand how CCFs increase multi-unit site risk and can also act as a starting point for future studies on the qualitative and quantitative categorizations of CCF effects within MUPSA.

The development of a common cause factor score table on IEC 61508 Part 6 Edition 2.0

Fusion Assessment of Safety and Security for Intelligent Industrial Unmanned Systems

An Application of a Modified Beta Factor Method for the Analysis of Software Common Cause Failures

Modelling common cause failures of large digital I&C systems with coloured Petri nets

Formalized Identification Of Key Factors In Safety-Relevant Failure Scenarios

Average probability of a dangerous failure on demand: Different modelling methods, similar results

Safety Assessment of Complex Electromechanical Systems Based on Hesitant Interval-Valued Intuitionistic Fuzzy Theory

Low Carbon-Oriented Optimal Reliability Design With Interval Product Failure Analysis And Grey Correlation Analysis

Common cause failure effect analysis for PFDavg uncertainty

Determining the Critical Failure Factors for Industry 4.0: An Exploratory Sequential Mixed Method Study

Assessing the Impact of Common Cause Failures on Site Risk within Level 1 Multi-Unit PSA

Reliability assessment of man‐machine systems subject to probabilistic common cause errors

Failure Mechanism Traceability and Application in Human System Interface of Nuclear Power Plants using RESHA

Securing Safety in Collaborative Cyber-Physical Systems through Fault Criticality Analysis

Quantitative evaluation of common cause failures in high safety-significant safety-related digital instrumentation and control systems in nuclear power plants

Expected Failure Method and Its Analysis for Safety Evaluation in a Cyber-Physical Power System

A mixed model to evaluate random hardware failures of whole-redundancy system in ISO 26262 based on fault tree analysis and Markov chain

Risk assessment of safety data link and network communication in digital safety feature control system of nuclear power plant

A Methodology to Identify and Assess High-Risk Causes for Electrical Personal Accidents Based on Directed Weighted CN

A Methodological Framework with Rough-Entropy-electre TRI to Classify Failure Modes for Co-Implementation of Smart PSS

A Rough TOPSIS Approach for Failure Mode and Effects Analysis in Uncertain Environments