Abstract:Chemical vapor deposition was used to produce multi-walled carbon nanotubes (MWCNTs), which were modified by Fe–Ni/AC catalysts to enhance CO 2 adsorption. In this study, a new realm of possibilities and potential advancements in CO 2 capture technology is unveiled through the unique combination of cutting-edge modeling techniques and utilization of the recently synthesized Fe–Ni/AC catalyst adsorbent. SEM, BET, and FTIR were used to analyze their structure and morphology. The surface area of MWCNT was found to be 240 m 2 /g, but after modification, it was reduced to 11 m 2 /g. The modified MWCNT showed increased adsorption capacity with higher pressure and lower temperature, due to the introduction of new adsorption sites and favorable interactions at lower temperatures. At 25 °C and 10 bar, it reached a maximum adsorption capacity of 424.08 mg/g. The optimal values of the pressure, time, and temperature parameters were achieved at 7 bar, 2646 S and 313 K. The Freundlich and Hill models had the highest correlation with the experimental data. The Second-Order and Fractional Order kinetic models fit the adsorption results well. The adsorption process was found to be exothermic and spontaneous. The modified MWCNT has the potential for efficient gas adsorption in fields like gas storage or separation. The regenerated M-MWCNT adsorbent demonstrated the ability to be reused multiple times for the CO 2 adsorption process, as evidenced by the study. In this study, a feed-forward MLP artificial neural network model was created using a back-propagation training approach to predict CO 2 adsorption. The most suitable and efficient MLP network structure, selected for optimization, consisted of two hidden layers with 25 and 10 neurons, respectively. This network was trained using the Levenberg–Marquardt backpropagation algorithm. An MLP artificial neural network model was created, with a minimum MSE performance of 0.0004247 and an R 2 value of 0.99904, indicating its accuracy. The experiment also utilized the blank spreadsheet design within the framework of response surface methodology to predict CO 2 adsorption. The proximity between the Predicted R 2 value of 0.8899 and the Adjusted R 2 value of 0.9016, with a difference of less than 0.2, indicates a high level of similarity. This suggests that the model is exceptionally reliable in its ability to predict future observations, highlighting its robustness.

Generic AI models for mass transfer coefficient prediction in amine‐based CO2 absorber, Part II: RBFNN and RF model

Feature analysis of generic AI models for CO2 equilibrium solubility into amines systems

CO2 Removal from Air by Hollow-fiber Membrane-based Absorption System

Prediction and Quantifying Parameter Importance in Simultaneous Anaerobic Sulfide and Nitrate Removal Process Using Artificial Neural Network

Bi-disperse Adsorption Model of the Performance of Amine Adsorbents for Direct Air Capture

Kinetics region and model for mass transfer in carbon dioxide absorption into aqueous solution of 2-amino-2-methyl-1-propanol

A generic machine learning model for CO 2 equilibrium solubility into blended amine solutions

Rate-Based Modelling and Validation of an Absorber and Stripper in an Amine-Based Post-Combustion CO2 Capture Process

Adsorption equilibrium of ammonia and water on porous adsorbents at low pressure: Machine learning-based models

Computational modelling and optimization of physicochemical absorption of CO2 in rotating packed bed

Analysis of effective area and mass transfer in a structure packing column using machine learning and response surface methodology

Study of CNG/diesel Dual Fuel Engine's Emissions by Means of RBF Neural Network

Numerical investigation of carbon dioxide capture using nanofluids via machine learning

Models for predicting multi-component phase equilibrium ratio based on artificial neural networks

Modeling of carbon dioxide absorption into aqueous alkanolamines using machine learning and response surface methodology

Prediction of NOx emission from two-stage combustion of NH 3 –H 2 mixtures under various conditions using artificial neural networks

Comprehensive investigation of isotherm, RSM, and ANN modeling of CO2 capture by multi-walled carbon nanotube

Rate-Based Modeling of CO2 Absorption in Aqueous NH3 in a Packed Column

Assessment of carbon dioxide separation by amine solutions using electrolyte non-random two-liquid and Peng-Robinson models: Carbon dioxide absorption efficiency

Model for Predicting CO2 Adsorption in Coal Left in Goaf Based on Backpropagation Neural Network

An artificial neural network model for predicting volumetric mass transfer coefficient in the biological aeration unit