Abstract:The g‐C3N4‐coated NCM811 helps to form a thin and uniform cathode/electrolyte interface, which greatly reduces unfavorable side reactions. Mechanical and structural stability is also improved, with no obvious intergranular or intragranular cracks formed during cycle. In addition, the g‐C3N4 coating promotes Li‐ion transport and improves reaction kinetics. High‐capacity nickel‐rich layered oxides are promising cathode materials for high‐energy‐density lithium batteries. However, the poor structural stability and severe side reactions at the electrode/electrolyte interface result in unsatisfactory cycle performance. Herein, the thin layer of two‐dimensional (2D) graphitic carbon‐nitride (g‐C3N4) is uniformly coated on the LiNi0.8Co0.1Mn0.1O2 (denoted as NCM811@CN) using a facile chemical vaporization‐assisted synthesis method. As an ideal protective layer, the g‐C3N4 layer effectively avoids direct contact between the NCM811 cathode and the electrolyte, preventing harmful side reactions and inhibiting secondary crystal cracking. Moreover, the unique nanopore structure and abundant nitrogen vacancy edges in g‐C3N4 facilitate the adsorption and diffusion of lithium ions, which enhances the lithium deintercalation/intercalation kinetics of the NCM811 cathode. As a result, the NCM811@CN‐3wt% cathode exhibits 161.3 mAh g−1 and capacity retention of 84.6% at 0.5 C and 55 °C after 400 cycles and 95.7 mAh g−1 at 10 C, which is greatly superior to the uncoated NCM811 (i.e. 129.3 mAh g−1 and capacity retention of 67.4% at 0.5 C and 55 °C after 220 cycles and 28.8 mAh g−1 at 10 C). The improved cycle performance of the NCM811@CN‐3wt% cathode is also applicable to solid–liquid‐hybrid cells composed of PVDF:LLZTO electrolyte membranes, which show 163.8 mAh g−1 and the capacity retention of 88.1% at 0.1 C and 30 °C after 200 cycles and 95.3 mAh g−1 at 1 C.

Perovskite Oxides Alleviate Microstrain and Anion Loss of Radially‐Aligned Ni‐Rich Ncm811 Cathodes under High‐Voltage Operations

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

Sr-Based Sub/Surface Integrated Layer and Bulk Doping to Enhance High-Voltage Cycling of a Ni-Rich Cathode Material

In situ epitaxial growth and electrochemical conversion of LiNi0.5Mn1.5O4 thin layer on Ni-rich cathode materials for high voltage lithium-ion batteries

Enabling Structure/Interface Regulation for High Performance Ni‐Rich Cathodes

A gradient oxy-thiophosphate-coated Ni-rich layered oxide cathode for stable all-solid-state Li-ion batteries

Improving electrochemical performance of NCM811 cathodes for lithium-ion batteries via consistently arranging the hexagonal nanosheets with exposed {104} facets

Strain engineering of Ni‐rich cathode enables exceptional cyclability in pouch‐type full cells

Long-cycle Lithium batteries with LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathodes above 4.5 V enabled by uniform coating of nanosized garnet electrolytes

Operando chemo-mechanical evolution in LiNi0.8Co0.1Mn0.1O2 cathodes

Stabilizing high-Ni cathodes with gradient surface Ti-enrichment

Highly‐Dispersed Single‐Crystalline Ni‐Rich Cathodes with Low Li/O Loss for High‐Power and Long‐Life Li‐Ion Batteries

Enhanced Li-ion Intercalation Kinetics and Lattice Oxygen Stability in Single-Crystalline Ni-rich Co-poor Layered Cathodes

Enhancing cyclic and in-air stability of Ni-Rich cathodes through perovskite oxide surface coating

A novel calcination method towards layered Ni-rich cathode with enhanced electrochemical performances and regulated oxygen vacancies

Atomical Reconstruction and Cationic Reordering for Nickel‐Rich Layered Cathodes

Synergistic effects of conformal surface precise nanofilm coating and doping on single-crystal LiNi0.5Co0.2Mn0.3O2 at high voltage

Alleviating Structure Collapse of Polycrystalline LiNi X Co Y Mn1-x-y O2 Via Surface Co Enrichment

Two‐Dimensional Graphitic Carbon‐Nitride (g‐C3N4)‐Coated LiNi0.8Co0.1Mn0.1O2 Cathodes for High‐Energy‐Density and Long‐Life Lithium Batteries