Abstract:Constructing hybrid heterostructures of transition-metal dichalcogenides is an effective strategy to enhance their electrochemical performance and stability as anode materials in lithium-ion batteries. In this work, a facile in situ strategy was developed to engineer lattice-mismatched MoS2–ZnS together with C into hierarchical nanostructures. The three-dimensional architecture was constructed using few-layer MoS2 nanosheets as the building block, and ZnS and C coexisted among the MoS2 nanosheets with a mesoporous structure. By the synergy effect of integrated interfaces and hierarchical configuration, as-formed heterostructures exhibit increased conductivity, enhanced e–/Li+ transfer efficiency, and retarded volume expansion during the electrochemical process. All of these contribute to the greatly increased lithium storage capability and well-preserved stability. Impressively, as-obtained materials exhibit a high lithium storage capacity of 961.9 mA g–1 at 100 mA g–1 after 100 cycles (about 3.1 times higher than pristine MoS2 after 35 cycles), good rate retention, and superior cycling stability with 9.5% decay. Therefore, the proposed strategy provides a favorable direction for developing high-activity and low-cost electrode materials with potential applications in electrochemical fields.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01266?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01266</a>.EDS analysis of the obtained MoS2/ZnS/C heterostructures; FT-IR spectra of products before and after heating treatment; XPS spectra of MoS2/ZnS-DETA precursor; nitrogen adsorption–desorption isotherms of MoS2/ZnS-DETA precursor; SEM image and XRD patterns of MoS2/ZnS-DETA hybrid nanostructures with adding different Zn/Mo molar ratios; and SEM and XRD analyses of products obtained with a Zn/Mo molar ratio of 0.7:1 (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01266/suppl_file/ae0c01266_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Synthesis of Heterostructured Dual metal Sulfides by High-temperature Mixing Hydrothermal Method as a Ultra-high Rate Anode for Li-ion Batteries

Hierarchical Nanotubes Constructed by Co9 S8 /MoS2 Ultrathin Nanosheets Wrapped with Reduced Graphene Oxide for Advanced Lithium Storage

Design and facile synthesis of defect-rich C-MoS2/rGO nanosheets for enhanced lithium-sulfur battery performance

An Efficient Multidoped Cu0.39Zn0.14Co2.47O4-ZnO Electrode Attached on Reduced Graphene Oxide and Copper Foam As Superior Lithium-Ion Battery Anodes

CoS2 enhanced SnO2@rGO heterostructure quantum dots for advanced lithium-ion battery anode

Construction of Uniform SnS2/ZnS Heterostructure Nanosheets Embedded in Graphene for Advanced Lithium-Ion Batteries

In Situ Encapsulation of SnS2/MoS2 Heterojunctions by Amphiphilic Graphene for High-Energy and Ultrastable Lithium-Ion Anodes

Small‐Sized CuS Nanoparticles/N, S Co‐Doped rGO Composites as the Anode Materials for High‐Performance Lithium‐Ion Batteries

In Situ Construction of Zn2Mo3O8/ZnO Hierarchical Nanosheets on Graphene as Advanced Anode Materials for Lithium-Ion Batteries

2D Cu 2− x Se@graphene multifunctional interlayer boosting polysulfide rapid conversion and uniform Li 2 S nucleation for high performance Li–S batteries

Composites of Reduced Graphene Oxide and Fe 2 O 3 Nanoparticles Anchored on MoS 2 Nanosheets for Lithium Storage

Rational design of hollow flower-like MoS2/Mo2C heterostructures in N-doped carbon substrate for synergistically accelerating adsorption-electrocatalysis of polysulfides in lithium sulfur batteries

General Synthesis of Graphene/Metal Oxide Heterostructures for Enhanced Lithium Storage Performance

Carbonate-assisted hydrothermal synthesis of porous, hierarchical CuO microspheres and CuO/GO for high-performance lithium-ion battery anodes

In situ constructed bimetallic sulfide heterostructures on 3D graphene for efficient lithium storage

0D-2D multifunctional bimetallic MOF derivative-MXene heterojunction for high areal capacity lithium-sulfur batteries

Synergistic Adsorption-Electrocatalysis of 2D/2D Heterostructure Toward High Performance Li-S Batteries

In Situ Synthesis of CoMoO4 Microsphere@rGO as a Matrix for High-Performance Li-S Batteries at Room and Low Temperatures

Interface Engineering of Hierarchical MoS 2 /ZnS/C Heterostructures as Anode Materials for Highly Improved Lithium Storage Capability

Dual Regulation Mechanism of MoS2/MoO3 Heterostructure for Polysulfide and Volume Effect Enables Stable and Durable Lithium Storage

General Synthesis of Dual Carbon‐Confined Metal Sulfides Quantum Dots Toward High‐Performance Anodes for Sodium‐Ion Batteries