Synthesis and evaluation of novel Cu-based adsorbent-containing catalysts for CO 2 hydrogenation to methanol and value-added products

Rim Ismail,Mohamed Ali H Saad,Mohamed J. Al-Marri,Ali Sardar,Assem T. Mohamed,Muftah El-Naas,Ahmed M.S. Soliman,Abdelbaki Benamor,Mohamed Ali H. Saad
DOI: https://doi.org/10.1016/j.jece.2024.112325
IF: 7.7
2024-03-06
Journal of Environmental Chemical Engineering
Abstract:In this work, sequential incipient wetness impregnation method was used to synthesize Cu/Al 2 O 3 , Cu/Na 2 O/Al 2 O 3 and Cu/CaO/Al 2 O 3 catalysts in different compositions for CO 2 conversion to value-added products. Synthesized catalysts were characterized using various analytical techniques and their performances for CO 2 catalytic conversion were tested in a high-pressure packed bed reactor under reaction conditions of P = 60 bars, T = 300 °C, and H 2 /CO 2 = 3. The obtained results revealed that the type of adsorbent had a significant impact on CO 2 conversion, with CaO-containing catalyst being more efficient for methanol selectivity. Increased Cu content from 10 wt% to 30 wt% with fixed CaO content of 10 wt% resulted in a small increase in CO 2 conversion where the highest CO 2 conversion of 16.44% and the highest methanol selectivity (17.75%) were obtained for catalyst containing 20 wt% of copper. The best performing catalyst was further promoted using 0.5 wt% Rh promoter which improved both methanol selectivity and space time yield to 23.2% and 0.08 g MeOH g cat −1 h −1 , respectively. The comparative high performance of the Rh-promoted catalyst was attributed to smaller metal oxide particle size with uniform dispersion, presence of effective hydrogen spill over, moderate basic sites, surface defects and presence of induced copper species.
engineering, chemical, environmental
What problem does this paper attempt to address?