Abstract:Objective The B-2 aircraft is currently a strategic bomber with excellent stealth performance in the world， and its low detectability is attributed to its unique radar absorbing coating and small radar cross section. However， the high-temperature gas from the plume of an aircraft cannot be directly concealed and eliminated， becoming a potential source of infrared radiation. For Type B-2 aircraft， infrared radiation may come from high-temperature components such as the engine’s high-temperature plume， skin， and nozzle. The exhaust plume of an engine often contains components such as CO 2 ， H 2 O， and CO， which can emit intense infrared radiation at specific wavelengths through vibrotational level transitions at high temperatures. In addition， the skin subjected to aerodynamic heating will also emit a continuous spectrum that follows Planck’s law. This paper numerically analyzes the infrared radiation characteristics of a B-2 like aircraft at different observation angles under a representative flight condition （12 km@0.8 Ma）， including the spectrum， in-band radiance， and synthetic IR image. Methods Taking the B-2 aircraft as the research object （Fig.3）， the specific heat of segmented method and the idea gas assumption are combined to predict the flow and thermal characteristics parameters of the engine nozzle. The Navier-Stokes equation is solved based on the FVM method to obtain the flow field. The skin temperature is calculated based on the radiation equilibrium wall condition. Based on the statistical narrow-band （SNB） model， the physical properties of radiating gases are calculated， and the radiation transport equation （RTE） is solved using the light-of-sight （LOS） method. The Cartesian coordinate system is used to describe the radiation distribution in observation angles in 2π space， and the observation angle is described by the zenith angle θ and the circumference φ （Fig.5）. Results and Discussions The high-temperature regions of the aircraft is mainly located near the handpiece， air intake， engine compartment lid， and nozzle， with the highest temperature approaching 250 K （Fig.8）. A significant afterburning effect occurs within a certain range from the nozzle， resulting in an increase in the plume temperature to 540 K， and an increase in the mass fractions of H 2 O and CO 2 to 0.045 and 0.025， respectively （Fig.9）. The spectral intensity of the skin is the highest at a top-view angle with a peak value of 596 W/（sr·μm）. The peak spectral intensity in the bottom-view is 78.2% of that in the top-view. The peak spectral intensity at side， front， and rear views is similar， which is 12.8% of that at top-view （Fig.10）. In the top-view， the total spectral radiation intensity of the target is nearly 3 orders of magnitude higher than that of the skin， and the spectral peak value is in bands of 2.7 μm， 4.3 μm and 5～8 μm （Fig.13）. The integrated radiation intensities of skin in the MWIR and LWIR bands are 8.2 W/sr and 1.9×10 3 W/sr， respectively （Fig.11 and 12）， and the total radiation intensity of the target is 1×10 3 W/sr and 2.01×10 3 W/sr （Fig.14 and 15）. The maximum radiation intensity of the plume of the B-2 type aircraft in the MWIR band is approximately 2 times that of the LWIR band and four times that of the 4.3 μm band. In particular， the radiation intensity in the MWIR band is nearly three orders of magnitude higher than that in the 2.7 μm band （Fig.17）. Conclusions The radiation intensity of the B-2 type aircraft strongly depends on the wave band and observation angle， and the radiation intensity of the target is the strongest under the top-view observation. The main sources of target radiation intensity in the MWIR band and the LWIR band are the tail plume and the aircraft body， respectively. This work can provide a theoretical reference for target characteristic identification of the B-2 type aircraft.

Long wave infrared signature of swept back leading edges in aircraft frontal aspect

Analysis of aero engine plume potential core infrared signature

Numerical study of aerodynamic heating and shock detached distance for sharp leading edge

Numerical Simulation of Infrared Radiation Characteristics of the B-2-like Aircraft

Modeling and Analysis on Self-Infrared Radiation Characteristics of Whole Aircraft Skin

Effect of Trough Incidence Angle on the Aerodynamic Characteristics of a Biomimetic Leading-Edge Protuberanced (LEP) Wing at Various Turbulence Intensities

Effect of Leading-Edge Bluntness on Shockwave–Boundary-Layer Interaction in a Scramjet Intake

Leading edge bluntness effects on the hypersonic flow over the double-wedge at multiple aft-wedge angles

Whole LWIR Directional Thermal Emission Based on ENZ Thin Films

Experimental Study on Infrared Radiation Characteristics and Matching Performance of Low-Observable Nozzles

Analysis of MWIR and LWIR Signature of Supersonic Aircraft to Air-to-air and Surface-to-air Missile by Coupled Simulation Method

Integrated Infrared Radiation Characteristics of Aircraft Skin and the Exhaust Plume

Investigation of aerodynamic heating in V-shaped cowl-lip of the inward turning inlet

Investigation on Infrared Radiation Signatures of Under-Expanded Rocket Exhaust Plumes Due to Angle of Attack

Numerical study on infrared radiation intensity and suppression methods of nozzle considering multi-component effects

Infrared thermography techniques for boundary layer state visualisation

Application Of Temperature-Sensitive Paint For Transition Detection On An NLF Forward-Swept Wing Under Harmonic Pitch Oscillation At Flight-Relevant Mach And Reynolds Numbers

Thermo-fluid characteristics and lock-on range efficiency of infrared suppression (IRS) devices with diathermic funnels in the presence of surface radiation: A comparative study

Stray Light Analysis and Suppression for an Infrared Fourier Imaging Spectrometer

Analytical mechanisms for heat flux reduction on a V-shaped blunt leading edge

Mid-wave and long-wave infrared signature model and measurement of power lines against atmospheric path radiance