Abstract:Polymeric membranes are used on very large scales for drinking water production and kidney dialysis, but they are nearly always prepared by using large quantities of unsustainable and toxic aprotic solvents. In this study, a water-based, sustainable, and simple way of making polymeric membranes is presented without the need for harmful solvents or extreme pH conditions. Membranes were prepared from water-insoluble polyelectrolyte complexes (PECs) via aqueous phase separation (APS). Strong polyelectrolytes (PEs), poly(sodium 4-styrenesulfonate) (PSS), and poly(diallyldimethylammonium chloride) (PDADMAC) were mixed in the presence of excess of salt, thereby preventing complexation. Immersing a thin film of this mixture into a low-salinity bath induces complexation and consequently the precipitation of a solid PEC-based membrane. This approach leads to asymmetric nanofiltration membranes, with thin dense top layers and porous, macrovoid-free support layers. While the PSS molecular weight and the total polymer concentrations of the casting mixture did not significantly affect the membrane structure, they did affect the film formation process, the resulting mechanical stability of the films, and the membrane separation properties. The salt concentration of the coagulation bath has a large effect on membrane structure and allows for control over the thickness of the separation layer. The nanofiltration membranes prepared by APS have a low molecular weight cutoff (<300 Da), a high MgSO4 retention (∼80%), and good stability even at high pressures (10 bar). PE complexation induced APS is a simple and sustainable way to prepare membranes where membrane structure and performance can be tuned with molecular weight, polymer concentration, and ionic strength.This article has not yet been cited by other publications.

Fabrication of stable polyelectrolyte complexed membrane for dye/salt separation via dynamic self-assembly coupled ice-templating technique

Fabrication and performance of a new type of charged nanofiltration membrane based on polyelectrolyte complex

Fabrication anddye-salt separation of positively charged PVC/PEI composite nanofiltration membranes

Combing Three-Dimensional Water Channels and Ultra-Thin Skin Layer Enable High Flux and Stability of Loose Polyimide/sio2 Nanofiltration Membranes at Low Operating Pressure Via One Step In-Situ Modification

Fabrication of highly permeable PVDF loose nanofiltration composite membranes for the effective separation of dye/salt mixtures

Polyethylenimine-mica nanosheets/cellulose nanofibers stacked loose nanofiltration membrane for effective dye/salt separation

Stability and permeation behavior of a porous membrane modified by polyelectrolyte networks enabled by electro-deposition and cross-linking for water purification

Polyethylenimine Deposited on Phosphomolybdic-Acid-Loaded Polyacrylonitrile Membranes for Enhanced Dye/Salt Separation

Nanofiltration Membrane Via EGCG-PEI Co-Deposition Followed by Cross-Linking on Microporous PTFE Substrates for Desalination

Construction of Loose Positively Charged NF Membrane by Layer-by-Layer Grafting of Polyphenol and Polyethyleneimine on the PES/Fe Substrate for Dye/Salt Separation

Fabrication of Loose Nanofiltration Membrane with Laponite Nanosheets Incorporated into Polyamide Layer for Effective Dye/divalent Salt Separation

Encapsulated Polyethyleneimine Enables Synchronous Nanostructure Construction and in Situ Functionalization of Nanofiltration Membranes.

Fabrication of a Charged PDA/PEI/Al2O3 Composite Nanofiltration Membrane for Desalination at High Temperatures

Constructing Polyamide/Ceramic Composite Membranes for Highly Efficient and Selective Separation towards Dye/salt Solution

Fabrication of ultrafiltration membranes based on methacrylate copolymers containing quaternary ammonium and PEG units for dye removal

Two-dimensional Cu-FeTCPP Nanozyme Incorporated Loose Nanofiltration Membrane with Self-Cleaning Property for Dye/salt Separation

Nanocomposite Deposited Membrane for Oil-in-Water Emulsion Separation with in Situ Removal of Anionic Dyes and Surfactants

Dye Sieving and Dye/salt Separation PEI-based Loose Nanofiltration Membrane Modified by NH2-MIL-101(Fe) and Polyphenol Coating

Development of Highly Permeable Polyelectrolytes (Pes)/uio-66 Nanofiltration Membranes for Dye Removal

Polyelectrolyte Complex Membranes via Salinity Change Induced Aqueous Phase Separation

Dye sieving and dye/salt separation PEI-based loose nanofiltration membrane modified by NH 2 -MIL-101(Fe) and polyphenol coating