Abstract:Background: Contemporary advances in low-field magnetic resonance imaging systems can potentially widen access to cardiovascular magnetic resonance (CMR) imaging. We present our initial experience in building a comprehensive CMR protocol on a commercial 0.55 T system with a gradient performance of 26 mT/m amplitude and 45 T/m/s slew rate. To achieve sufficient image quality, we adapted standard imaging techniques when possible, and implemented compressed-sensing (CS) based techniques when needed in an effort to compensate for the inherently low signal-to-noise ratio at lower field strength. Methods: A prototype CMR exam was built on an 80 cm, ultra-wide bore commercial 0.55 T MR system. Implementation of all components aimed to overcome the inherently lower signal of low-field and the relatively longer echo and repetition times owing to the slower gradients. CS-based breath-held and real-time cine imaging was built utilizing high acceleration rates to meet nominal spatial and temporal resolution recommendations. Similarly, CS 2D phase-contrast cine was implemented for flow. Dark-blood turbo spin echo sequences with deep learning based denoising were implemented for morphology assessment. Magnetization-prepared single-shot myocardial mapping techniques incorporated additional source images. CS-based dynamic contrast-enhanced imaging was implemented for myocardial perfusion and 3D MR angiography. Non-contrast 3D MR angiography was built with electrocardiogram-triggered, navigator-gated magnetization-prepared methods. Late gadolinium enhanced (LGE) tissue characterization methods included breath-held segmented and free-breathing single-shot imaging with motion correction and averaging using an increased number of source images. Proof-of-concept was demonstrated through porcine infarct model, healthy volunteer, and patient scans. Results: Reasonable image quality was demonstrated for cardiovascular structure, function, flow, and LGE assessment. Low-field afforded utilization of higher flip angles for cine and MR angiography. CS-based techniques were able to overcome gradient speed limitations and meet spatial and temporal resolution recommendations with imaging times comparable to higher performance scanners. Tissue mapping and perfusion imaging require further development. Conclusion: We implemented cardiac applications demonstrating the potential for comprehensive CMR on a novel commercial 0.55 T system. Further development and validation studies are needed before this technology can be applied clinically.

CMRsim–A python package for cardiovascular MR simulations incorporating complex motion and flow

PhoenixMR: A GPU-based MRI simulation framework with runtime-dynamic code execution

MRXCAT-CDTI: A Numerical Cardiac Diffusion Tensor Imaging Phantom

Three-dimensional spatially resolved phase graph framework

Realistic Microstructure Simulator (RMS): Monte Carlo simulations of diffusion in three-dimensional cell segmentations of microscopy images

Real-time Phase-Contrast Flow Cardiovascular Magnetic Resonance with Low-Rank Modeling and Parallel Imaging

MRS-Sim: Open-Source Framework for Simulating Realistic In Vivo-like MR Spectroscopy Data

Integration of Different Cardiac Electrophysiological Models into a Single Simulation Pipeline

Portable simulation framework for diffusion MRI

Motion-compensated MR CINE reconstruction with reconstruction-driven motion estimation

BOLDsωimsuite: A new software suite for forward modeling of the BOLD fMRI signal

An Eulerian formulation for the computational modeling of phase‐contrast MRI

Building a comprehensive cardiovascular magnetic resonance exam on a commercial 0.55 T system: A pictorial essay on potential applications

Progress Towards Patient-Specific Computational Flow Modeling of the Left Heart via Combination of Magnetic Resonance Imaging with Computational Fluid Dynamics

Computational modeling of left ventricular flow using PC–CMR–derived four–dimensional wall motion

RMSim: Controlled Respiratory Motion Simulation on Static Patient Scans

Combined CFD/MRI Analysis of Left Ventricular Flow

KomaMRI.jl: An Open-Source Framework for General MRI Simulations with GPU Acceleration

DMCVR: Morphology-Guided Diffusion Model for 3D Cardiac Volume Reconstruction

Accelerated Real-time Cine and Flow under In-magnet Staged Exercise

Free-Running Time-Resolved First-Pass Myocardial Perfusion Using a Multi-Scale Dynamics Decomposition: CMR-MOTUS