Abstract:The prominent performance of wave elimination and energy absorption makes calcareous sand important and useful in infrastructure construction and protection engineering. Due to the high compressibility induced by remarkable intragranular void and irregular shape, calcareous sand presents different mechanical behaviors from common terrestrial sands. Considerable efforts have been made to explore the static and dynamic mechanical properties of calcareous sand. In this paper, a series of monotonous experiments have been performed on calcareous sand utilizing the electrohydraulic servo-controlled test apparatus designed by the Global Digital Systems Ltd (GDS). The effects of confining pressure and relative density on the mechanical properties of dry, drained, and undrained saturated sand were studied, and the underlying micromechanism of deformation and failure was discussed. It can be found that the residual stress of dry calcareous sand is independent of the relative density, while the peak stress and residual stress of drainage saturated sand have a positive correlation with the relative density. The increase of confining pressure makes the strain softening more remarkable and heightens the peak stress and residual stress. The stress-strain curve of calcareous sand can be divided into two portions: prepeak portion and postpeak softening portion. For the dry sand and drainage saturated sand, the softened part can be partitioned into three phases, i.e., accelerated phase, steady phase, and degradation phase, while the undrained saturated sand tends to hyperbolic softening. A mathematical model composed of a hyperbolic function and an inverted S-shaped function was formulated to describe the multiphase characteristic, in which the setting of parameter p expands its applicability. The experimental result validated the model, showing that the model can better describe the monotonic stress-strain relationship of calcareous sand. Besides, the physical meanings of model parameters were discussed.

Moisture Effects on the Undrained Dynamic Behavior of Calcareous Sand at High Strain Rates

One-dimensional dynamic compressive behavior of dry calcareous sand at high strain rates

Effects of Strain Rate and Initial Density on the Dynamic Mechanical Behaviour of Dry Calcareous Sand

Dynamic mechanical response and particle breakage characteristics of calcareous sand

High-Strain Rate Compressive Behavior of Dry Mason Sand Under Confinement

The Strain Rate Effects of Coral Sand at Different Relative Densities and Moisture Contents

Experimental Study on Dynamic Characteristics of Saturated Remolded Soft Clay with Sand Particles

Dynamic Uniaxial Compressive Behavior of Colorado Mason Sand Under High-Strain Rates

Undrained SHPB experiments on calcareous sand with different saturation degrees

Water saturation effects on dynamic behavior and microstructure damage of sandstone: Phenomena and mechanisms

Experimental and Mathematical Modeling of Monotonic Behavior of Calcareous Sand

Experimental study on the effects of water content on the compression characteristics and particle breakage of calcareous sand

Effect of Water Saturation on Dynamic Behavior of Sandstone after Wetting-Drying Cycles

The Influence of the Strain Rate and Prestatic Stress on the Dynamic Mechanical Properties of Sandstone—A Case Study from China

Stress–dilatancy behavior of dense marine calcareous sand under high-cycle loading: An experimental investigation

Experimental Investigation of Sand Subjected to High Stress Levels in Wet and Dry Conditions

Hydromechanical behavior of unsaturated artificially–hydrophobized sand: Compression, shearing, and dilatancy

Particle breakage of calcareous sand from low-high strain rates

Cumulative deformations and particle breakage in calcareous sand subjected to drained high-cyclic loading: Experimental investigation

Effect of Particle Size on High-Strain Rate Response of Sand

Dynamic behaviors of calcareous sand under repeated one-dimensional impacts