Abstract:The polarization state of light waves significantly affects the quality of holographic recordings. This paper quantitatively analyzes the impact of different polarization states of signal and reference beams on the quality of holographic recordings in PQ/PMMA photopolymer systems during the holography process. By deriving the light field distribution of the interference between two light waves of different polarization states and introducing the interference fringe contrast and the modulation of the refractive index of the photopolymer, we established the relationship between the diffraction efficiency of PQ/PMMA photopolymer holographic gratings and the angle between polarization directions. Based on this relationship, simulations and experiments were conducted. The experimental results demonstrated that as the angle between the polarization directions increased, the diffraction efficiency of the material decreased, with the efficiency dropping to 24.69% of its original value when the angle increased from 0° to 50°. When the angle increased to 60°, the influence of polarization characteristics became gradually significant, and at 90°, it was entirely dominated by polarization characteristics. The photoinduced birefringence properties of the PQ/PMMA prepared in the measurement experiment were studied, and the polarization characteristics of the reconstructed light under polarization direction angles of 0°, 60°, and 90° were investigated. The results indicated that at a polarization direction angle of 60 degrees, the material exhibited a significant response to the polarization information of the signal light. Finally, holographic recordings of objects at different polarization direction angles were conducted, and the reconstructed images were used to visually reflect the impact of the polarization direction angle on the quality of holographic recordings.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the influence of signal light and reference light in different polarization states on the holographic recording quality during the holographic recording process based on the PQ/PMMA photopolymer system. Specifically, through quantitative analysis of the interference characteristics of signal light and reference light at different polarization angles, the paper explores the relationship between the polarization direction angle and the diffraction efficiency of the PQ/PMMA photopolymer holographic grating.
### Background of the Paper
Holography is a technology that uses the interference principle of light waves to record the amplitude and phase information of light waves. It was first proposed by Gabor in 1948. Early holographic technology used coaxial optical paths, but due to the low coherence of the light source and the difficulty in separating the conjugate image from the original image, the quality of holograms was poor. In 1962, Leith and Upatnieks invented off - axis holography, using lasers as light sources, which overcame these limitations and enabled holography to enter a stage of rapid development.
### Research Materials
PQ/PMMA (benzoquinone - doped polymethyl methacrylate), as a holographic recording material, has unique advantages, such as a simple preparation process, a low shrinkage rate caused by photopolymerization, and the ability to produce materials of different thicknesses. PQ/PMMA is sensitive to polarization states and can respond to the polarization state of the laser. Therefore, it is of great significance to study its holographic recording performance under different polarization states.
### Main Research Contents
1. **Theoretical Analysis**:
- The light field distribution when two plane waves in different polarization states interfere was derived.
- The concepts of interference fringe contrast and photopolymer refractive index modulation were introduced, and the relationship between the diffraction efficiency of the PQ/PMMA photopolymer holographic grating and the polarization direction angle was established.
2. **Simulation and Experiment**:
- The quality change of the interference grating at different polarization angles was verified by numerical simulation.
- In the experiment, PQ/PMMA photopolymer was used as the recording medium. By changing the polarization states of the signal light and the reference light, holographic images were recorded and reconstructed, further verifying the results of the theoretical analysis.
### Key Findings
- As the polarization direction angle increases, the diffraction efficiency of the PQ/PMMA photopolymer gradually decreases. When the polarization direction angle increases from 0° to 50°, the diffraction efficiency drops to 24.69% of the initial value.
- When the polarization direction angle increases to 60°, the influence of polarization characteristics gradually becomes significant; when the polarization direction angle reaches 90°, the diffraction efficiency is completely dominated by polarization characteristics.
- The experimental results show that when the polarization direction angle is 60°, the PQ/PMMA material shows a significant response to the polarization information of the signal light.
### Conclusion
Through theoretical analysis and experimental verification, this paper reveals the relationship between the polarization direction angle and the diffraction efficiency of the PQ/PMMA photopolymer holographic grating, providing theoretical and experimental guidance for optimizing holographic recording materials and improving holographic recording technology.