Investigation of demulsification efficiency in water-in-crude oil emulsions using dissipative particle dynamics

Xianyu Song,Peng Shi,Ming Duan,Shenwen Fang,Yongzhang Ma

DOI: https://doi.org/10.1039/c5ra06570d

IF: 4.036

2015-01-01

RSC Advances

Abstract:Demulsification efficiency with alternating hydrophobic blocks of the polyether is investigated by dissipative particle dynamics.

chemistry, multidisciplinary

What problem does this paper attempt to address?

Efficient demulsification of cationic polyacrylate for oil-in-water emulsion: Synergistic effect of adsorption bridging and interfacial film breaking

Sisi Yuan,Yifan Wang,Xiujun Wang,Yongjun Wang,Shuai Liu,Ming Duan,Shenwen Fang

DOI: https://doi.org/10.1016/j.colsurfa.2022.128393

2022-01-01

Abstract:The development of reverse demulsifier is an urgent need for the increasing amount of produced liquid in oilfield. Synthesis of reverse demulsifier containing multiple characteristics is an effective method. In view of this, this study reports a series of cationic polyacrylates as the reverse demulsifiers, which were prepared by using 3chloro-1-propanol to modify the copolymer of acrylate and N-[3-(dimethylamino) propyl] methacryamide (DMAPMA). The properties and performance tests showed that the PMD1 prepared by using methyl acrylate (MA) as monomer (mass ratio of MA to DMAPMA was 2:1) has well water solubility, high interfacial activity, and the best demulsification efficiency. For treating the produced liquid from an offshore oilfield, demulsification efficiency of PMD1 was 94.7% with 50 mg/L dosage, which was much higher than that of the reagent in use (15.7%). Furthermore, the demulsification mechanism of PMD1 was studied by oil-water partition coefficient experiment, zeta potential measurement, optical tweezers method, elastic modulus measurement, and coalescence kinetics experiment. Prominent demulsification ability of PMD1 was attributed to the synergistic effect of adsorption bridging via cationic group and oil/water interfacial film breaking by acrylate group. The cationic polyacrylate combines the advantages of polyacrylate and polycation reverse demulsifiers, which display a great application prospect in the petroleum industry.
Advancing oil-water separation: Design and efficiency of amphiphilic hyperbranched demulsifiers

Shu Yan,Pengfei Jiang,Xinghong Zhang,Yitong Dai,Bin Sun,Yongsheng Guo,Wenjun Fang

DOI: https://doi.org/10.1016/j.jcis.2024.08.101

2024-08-14

Abstract:Hypothesis: An innovative strategy for designing high-performance demulsifiers is proposed. It hypothesizes that integrating mesoscopic molecular simulations with macroscopic physicochemical experiments can enhance the understanding and effectiveness of demulsifiers. Specifically, it is suggested that amphiphilic hyperbranched polyethyleneimine (CHPEI) could act as an efficient demulsifier in oil-water systems, with its performance influenced by its adsorption behaviors at the oil-water interface and its ability to disrupt asphaltene-resin aggregates. Experiments: Several coarse-grained models of oil-water systems, with CHPEI, are constructed using dissipative particle dynamics (DPD) simulation. Following the insights gained from the simulations, a series of CHPEI-based demulsifiers are designed and synthesized. Demulsification experiments are conducted on both simulated and crude oil emulsions, with the process monitored using laser scanning confocal microscopy. Additionally, adsorption kinetics and small angle X-ray scattering are employed to reveal the inherent structural characteristics of CHPEI demulsifiers. Findings: CHPEI demonstrates over 96.7 % demulsification efficiency in high acid-alkali-salt systems and maintains its performance even after multiple reuse cycles. The simulations and macroscopic experiments collectively elucidate that the effectiveness of a demulsifier is largely dependent on its molecular weight and the balance of hydrophilic and hydrophobic groups. These factors are crucial in providing sufficient interfacial active functional groups while avoiding adsorption sites for other surfactants. Collaborative efforts between DPD simulation and macroscopic measurements deepen the understanding of how demulsifiers can improve oil-water separation efficiency in emulsion treatment.
Evolution of oil/water interface in the presence of SDBS detected by dual polarization interferometry

Ming Duan,Ziling Ding,Hu Wang,Yan Xiong,Shenwen Fang,Peng Shi,Shuai Liu

DOI: https://doi.org/10.1016/j.apsusc.2017.09.054

IF: 6.7

2018-01-01

Applied Surface Science

Abstract:In this work, the technique of dual polarization interferometry (DPI) was applied to establish a new method to monitor the real-time evolution of oil/water interface in the presence of sodium dodecyl benzene sulfonate (SDBS) at molecular level. A three-stage model of adsorption-desorption-detachment had been proposed and was systematically discussed upon the addition of different SDBS concentrations based on the variation of the interfacial mass with time. The results demonstrated two patterns of adsorption morphology at the oil/water interface, SDBS mono-molecules and SDBS hemi-micelles at SDBS concentrations below and above cmc respectively according to the relaxation time obtained by theoretical model and the reaction order calculated by integral method in the analysis of adsorbed dynamics. The capability of oil detachment with the aid of SDBS as well as the properties of the outlet fluid were investigated under two patterns of adsorption morphologies, which showed different effects of oil detachment with the aid of SDBS molecules. The speed of oil detachment and the fluorescence intensity of the outlet fluid during the detachment process indicated the fact that the oil detachment capability was significantly promoted by the morphology of the absorbed hemi-micelles. The findings in the present study are crucial for fully understanding the interfacial behavior of surfactants applied in oil/water interface, which is of great significance in enhanced oil recovery and pollution industry. (c) 2017 Elsevier B.V. All rights reserved.
Topological isomerism design of Demulsifiers: A fusion of molecular dynamics simulation and experiment

Chengjie Wang,Pingli Liu,Jinzhou Zhao,Juan Du,Xiang Chen,Xiaoyu Wu,Xianyu Song,Guan Wang,Jinming Liu,Yonghua Xiao

DOI: https://doi.org/10.1016/j.molliq.2024.125000

IF: 6

2024-05-16

Journal of Molecular Liquids

Abstract:Demulsifiers are crucial for enhancing crude oil extraction and transportation efficiency by facilitating the separation of oil–water emulsions. However, research conducted on the design and synthesis of demulsifiers based on the results of molecular dynamics simulation remains scarce. Herein, we designed eight block polyethers, and explored their interfacial behaviors at the oil–water interface via molecular dynamics simulation. Correspondingly, eight block polyether demulsifiers were synthesized, and their interface properties were tested. The simulation results were consistent with the experimental results, indicating that the energy of simulation systems could be efficiently reduced by designed molecules, and that the prepared demulsifiers with the same structure could achieve effective demulsification correspondingly. Based on the simulation and experimental results, a "hand-shaped" demulsification mechanism model was proposed. The demulsifiers with hydrophobic "palm" and hydrophilic "fingers" demonstrated a more efficient performance in demulsification. The hydrophobic "palm" was stable in the continuous oil phase, and the hydrophilic "fingers" could attract dispersed water droplets to aggregate, facilitating demulsification. The study also finds that longer hydrophilic "fingers" exert stronger molecular force. Combining molecular dynamics simulation and experiment significantly accelerates the development of new demulsifiers, highlighting the utility of this approach in the research on demulsifiers.

chemistry, physical,physics, atomic, molecular & chemical
Dissipative Particle Dynamics-Based Simulation of the Effect of Asphaltene Structure on Oil-Water Interface Properties

Chonghao Liang,Xiaoyan Liu,Hui Jiang,Ying Xu,Yongying Jia

DOI: https://doi.org/10.1021/acsomega.3c05486

IF: 4.1

2023-09-19

ACS Omega

Abstract:Asphaltenes are the main substances that stabilize emulsions during the production, processing, and transport of crude oil. The purpose of this research is to investigate the process of asphaltenes forming interfacial films at the oil-water interface by means of dissipative particle dynamics (DPD) and the effect of asphaltenes of different structures on the oil-water interface during the formation of interfacial film. It is demonstrated that the thickness of the interfacial film formed at the...

chemistry, multidisciplinary
The Effect of Hydrophobic Modified Block Copolymers on Water–Oil Interfacial Properties and the Demulsification of Crude Oil Emulsions

Juan Zhang,Ping Liu,Yuan Gao,Qingping Yu

DOI: https://doi.org/10.3390/polym16172392

IF: 5

2024-08-25

Polymers

Abstract:The demulsification effect of three types of block copolymers, BP123, BPF123, and H123, with the same PEO and PPO segments but different hydrophobic modification groups on crude oil emulsions and the properties of oil–water interfaces were investigated using demulsification experiments, an interfacial tensiometer, and surface viscoelastic and zeta potential instruments in this paper. The results showed that the hydrophobic modification group of the block copolymers had great effects on the demulsification performance. The H123 block copolymers with the strongest hydrophobicity had the best demulsification effect on the crude oil emulsions. The properties of the oil–water interfaces indicated that the modified block copolymers achieved the demulsification of crude oil emulsions by reducing the strength of the oil–water interfacial film and the interfacial tension.

polymer science
Dissipative Particle Dynamics Simulation and Microscopic Experimental Study of Emulsification Performance of Surfactant/Polymer Flooding

Biao Zhang,Baoshan Guan,Weidong Liu,Baoliang Peng,Sunan Cong

DOI: https://doi.org/10.3390/pr11051411

IF: 3.5

2023-05-07

Processes

Abstract:Polymers can increase the viscosity of water, reduce the relative permeability of the water phase, and enhance the flowability of the oil phase; surfactants can form molecular films at the oil–water interface boundaries, thereby reducing interfacial tension. Surfactant/polymer (S/P) flooding technology for enhancing oil recovery has become a major way to increase crude oil production. This study used dissipative particle dynamics (DPD) technology to simulate the emulsification process of a four-component composite system consisting of oil, water, sodium dodecylbenzene sulfonate (SDBS), and partially hydrolyzed polyacrylamide (HPAM). By changing the concentration of the S/P system, the effect on emulsification behavior was analyzed. Combined with particle distribution diagrams and interfacial tension parameters, the effect of the emulsification behavior on the performance of the S/P binary system was analyzed. On this basis, the effect of different emulsion performances on the recovery factor was evaluated using micro-experiments. The study found that the S/P system that produced stable emulsification had a lower interfacial tension and relatively good effect on improving the recovery factor. Increasing the concentration of the polymer and surfactant may cause changes in the interfacial film of the emulsion, thereby affecting the ability of the S/P system to reduce interfacial tension and may not improve the oil recovery factor. The research results help to better analyze and screen the S/P system used for oil extraction and improve crude oil recovery.

engineering, chemical
Molecular Simulations on the Coalescence of Water-in-Oil Emulsion Droplets with Non-ionic Surfactant and Model Asphaltene.

Xiaoyu Sun,Tian Tang,Hongbo Zeng

DOI: https://doi.org/10.1021/acs.langmuir.2c02804

IF: 3.9

2023-02-03

Langmuir

Abstract:Water droplets in crude oil can be stabilized by the adsorption of interfacially active components, such as asphaltenes. Demulsifiers like non-ionic surfactants are commonly used to destabilize the water-in-oil emulsions. In this work, molecular dynamics simulations and free energy calculations were performed to study the coalescence of water droplets coated with both model asphaltene and non-ionic surfactants [PEO-PPO-PEO copolymer (SurP) or Brij surfactant (SurB)]. For the first time, we quantitatively studied the interaction force between water droplets in the presence of both asphaltenes and demulsifiers and addressed the effect of solvent property on the coalescence process. At the droplet surface, demulsifiers adsorbed closer to the water phase and formed more hydrogen bonds with water molecules compared to asphaltenes, indicating the capability of demulsifiers to break the asphaltene film. Comparing the two non-ionic surfactants, VO-79/SurP complexes formed a single-layer film on the droplet surface, while a two-layer structure was formed by VO-79/SurB complexes. This led to a higher repulsive force during droplet coalescence when SurB was present, regardless of the type of solvent. Comparing the two different solvents (toluene vs heptane), for the same adsorbates, the interfacial film was more compact in heptane and there were fewer dispersed VO-79. For VO-79/SurB adsorbates, the bridging of VO-79 led to a smaller repulsion during droplet coalescence when the solvent was heptane, while the difference is insignificant for VO-79/SurP adsorbates. This work suggests that the energy barrier and interaction force for droplet coalescence is highly dependent on the structure of interfacial films, thus providing atomic-level insights into the demulsification mechanisms of water-in-oil emulsions in the presence of surface-active asphaltenes.

Chemistry,Environmental Science,Medicine
Comparative study on the performance and properties of polyether and polyacrylate crude oil demulsifier

Sisi Yuan,Xiujun Wang,Yongjun Wang,Ming Duan,Yan Xiong,Shenwen Fang

DOI: https://doi.org/10.1080/01496395.2024.2328671

IF: 2.799

2024-03-18

Separation Science and Technology

Abstract:Polyacrylate crude oil demulsifier is one of the hot topics in the research and development of demulsifier at present, there is a lack of systematic comparative study on performance and properties of polyether and polyacrylate crude oil demulsifier. In this paper, the demulsification performance and microscopic demulsification process of the two demulsifiers, namely polyacrylate P(MA-DBC) and polyether P199–59 are discussed. The demulsification performance of polyether P199–59 was superior to that of polyacrylate P(MA-DBC). The study of the microscopic process of demulsification established that for P199–59, the diffusion rate was faster, the saturated adsorption capacity was higher, the ability to destroy the oil-water interface film was stronger and the probability of water droplets collision coalescence was higher; therefore, it can achieve faster dehydration speed and higher dehydration rate than that of P(MA-DBC). The results of this comparative study are meaningful for improving the demulsification performance of polyacrylate demulsifier.

engineering, chemical,chemistry, multidisciplinary
Probing the Demulsification Mechanism of Emulsion with SPAN Series Based on the Effect of Solid Phase Particles

Qingchao Cheng,Guangsheng Cao,Yujie Bai,Zhixuan Zhu,Ning Zhang,Dongju Li

DOI: https://doi.org/10.3390/molecules28073261

IF: 4.6

2023-04-06

Molecules

Abstract:The solid particles in the produced fluids from the oil wells treated by compound flooding can greatly stabilize the strength of the interfacial film and enhance the stability of the emulsion, increasing the difficulty of processing these produced fluids on the ground. In this paper, the oil phase and the water phase were separated from the SPAN series emulsions by electrical dehydration technology and adding demulsifier agents. The changing trends of the current at both ends of the electrodes were recorded during the process. The efficient demulsification of the emulsion containing solid particles was studied from the perspective of oil-water separation mechanisms. Combined with the method of molecular dynamics simulation, the effect of the addition of a demulsifier on the free movement characteristics of crude oil molecules at the position of the liquid film of the emulsion were further analyzed. The results indicated that the presence of solid particles greatly increased the emulsifying ability of the emulsion and reduced its size. Under the synergistic effect of demulsifier and electric dehydration, the demulsification effect of the emulsion increased significantly, and the demulsification rate could reach more than 82%. The addition of demulsifiers changed the stable surface state of the solid particles. The free movement ability of the surrounding crude oil molecules was enhanced, which led to a decrease in the strength of the emulsion film so that the water droplets in the emulsions were more likely to coalesce and break. These results are of great significance for the efficient treatment of wastewater from oilfields, promoting the sustainability of environment-friendly oilfield development.
Investigation of Dioctyl Sodium Sulfosuccinate in Demulsifying Crude Oil-in-Water Emulsions

Nahid Hassanshahi,Guangji Hu,Jianbing Li

DOI: https://doi.org/10.1021/acsomega.2c04022

IF: 4.1

2022-09-08

ACS Omega

Abstract:This research investigated the performance of dioctyl sodium sulfosuccinate (DSS), a double-chain anionic surfactant, in breaking crude oil-in-water emulsions. The response surface methodology was used to consider the effect of the DSS concentration, oil concentration, and shaking time on demulsification efficiency and obtain optimum demulsification conditions. Further single-factor experiments were conducted to investigate the effects of salinity, crude oil conditions (fresh and weathered), and gravity separation settling time. The results showed that DSS efficiently demulsified stable emulsions under different oil concentrations (500-3000 mg/L) within 15 min shaking time. Increasing DSS concentration to 900 mg/L (critical micelle concentration) increased the demulsification efficiency to 99%. DSS not only improved the demulsification efficiency but also did not impede the demulsifier interfacial adsorption at the oil-water interface due to the presence of the double-chain structure. The low molecular weight enables the homogeneous distribution of DSS molecules in the emulsion, leading to a high demulsification efficiency within 15 min. Analysis of variance results indicated the importance of considering the interaction of oil concentration and shaking time in demulsification. DSS could reduce the total extractable petroleum hydrocarbons in the separated water to <10 mg/L without gravity separation and could achieve promising demulsification performance at high salinity (36 g/L) and various concentrations of fresh and weathered oil. The demulsification mechanism was explained by analyzing the microscopic images and the transmittance of the emulsion. DSS could be an efficient double-chain anionic surfactant in demulsifying stable oil-in-water emulsions.
A molecular modeling and experimental study of solar thermal role on interfacial film of emulsions for elucidating and executing efficient solar demulsification

Chunhong Nie,Yupeng Zhang,Huan Du,Guoqiang Han,Jiangrui Yang,Lili Li,HongjunWu,Baohui Wang,Xirui Wang

DOI: https://doi.org/10.1016/j.molliq.2023.121578

IF: 6

2023-03-09

Journal of Molecular Liquids

Abstract:The adsorption and intermolecular interactions of surfactant and polymer at the oil-water interface are related to interfacial property, which determines whether an efficient oil-water separation can be obtained. Taking oil/water emulsion from the ASP flooding as an example, the thermal role of solar demulsification was studied through combined simulation calculation and experiment. First, a molecular dynamics model of an oil/water interface containing sodium dodecyl benzene sulfonate (SDBS) and polyacrylamide (PAM) was constructed and was used to explore the thermal role on interfacial behavior and intermolecular interactions. Then, the variation of interfacial properties was characterized experimentally as interfacial tension and interfacial rheology. Finally, the effect of solar thermal role on the oil/water emulsions was monitored via the particle size distribution and the ratio of oil removal. The results show that the thermal field changes the configuration and motion behavior of SDBS and PAM and weakens their interaction energy, promoting SDBS extension into the oil. Thus interfacial tension is increased and the rigidity and strength of the interface are decreased, which destabilizes and bridges the emulsion droplets, facilitating coalescence and eventual oil-water separation. As a result, the size of oil droplets was promoted and the oil removal ratio of 40.53 % was achieved. This work provided insight into the thermal role of solar demulsification, thus providing theoretical support for effectively coupling solar photo, electric, and thermal energy to high-efficiency solar demulsification.

chemistry, physical,physics, atomic, molecular & chemical
The Paraffin Crystallization in Emulsified Waxy Crude Oil by Dissipative Particle Dynamics

Ruiqiong Wang,Tiantian Du,Jinchen Cao,Guoqiang Wang

DOI: https://doi.org/10.32604/fhmt.2024.047825

IF: 4.397

2024-01-01

Computer Systems Science and Engineering

Abstract:With the advancement of oilfield extraction technology, since oil-water emulsions in waxy crude oil are prone to be deposited on the pipe wall, increasing the difficulty of crude oil extraction. In this paper, the mesoscopic dissipative particle dynamics method is used to study the mechanism of the crystallization and deposition adsorbed on the wall. The results show that in the absence of water molecules, the paraffin molecules near the substrate are deposited on the metallic surface with a horizontal morphology, while the paraffin molecules close to the fluid side are arranged in a vertical column morphology. In the emulsified system, more water molecules will be absorbed on the metallic substrate than paraffin molecules, which obstructed the direct interaction between paraffin molecules and solid surface. Therefore, the addition of water molecules hinders the crystallization of wax near the substrate. Perversely, on the fluid side, water molecules promote the formation of paraffin crystallization. The research in this paper reveals the crystallization mechanism of paraffin wax in oil-water emulsions in the pipeline from the microscopic scale, which provides theoretical support for improving the recovery of wax-containing crude oil and enhancing the transport efficiency.

computer science, theory & methods, hardware & architecture
Investigation on the mechanism of heating effect influencing emulsifying ability of crude oil: Experimental and molecular dynamics simulation

Meiming He,Wanfen Pu,Tong Wu,Xuerui Yang,Xing Li,Rui Liu,Siying Li,Yongqiang Chen

DOI: https://doi.org/10.1016/j.colsurfa.2023.131654

2023-05-14

Abstract:Water flooding can create a transient heating effect that causes oil and water to self-emulsify. This study sought to understand how this effect impacts crude oil's emulsifying properties by conducting oil-water emulsification experiments and investigating the effects of initial temperature, heating rate, and effective time. Additionally, asphaltene dispersion, adsorption behavior, and viscoelasticity of crude oil and its interfacial components were analyzed to unravel the mechanism behind the heating effect on crude oil's emulsifying capacity. The heating effect was observed to suppress interaction force dissipation between asphaltene molecules effectively from low to high temperatures. This increased both the interfacial film thickness and steric hindrance, improving crude oil's emulsifying ability. However, at high temperatures, the interfacial film became unstable, which led to the normalization of crude oil's emulsifying ability after the effective time. These findings provide insight into the emulsifying mechanisms of water-drive reservoirs and the in-situ emulsifying theory of underground crude oil.

chemistry, physical
Relationship between the dynamic interfacial activity and demulsification performance of hyperbranched poly(amido amine) polyethers

Xiao-Jun Feng,Yin-Jun Tang,Yin Yang,Gang Wang,Ping Mei,Lu Lai

DOI: https://doi.org/10.1016/j.colsurfa.2021.127869

2022-01-01

Abstract:The relationship between demulsification performance and dynamic interfacial activity of polyether demulsifiers is essential. Herein, a series of hyperbranched poly(amido amine) polyethers (PAM polyethers) were designed and synthesized by controlling the mass ratio of propylene oxide (PO) to ethylene oxide (EO). The results indicate that the dehydration efficiency increased gradually with increasing the EO content, and PAM9915 can achieve complete separation of crude oil and water at 60 min. Therefore, the optimal polyether demulsifiers have a specific relative solubility number (RSN) value (≈ 18.5) to attain hydrophilic-lipophilic deviation (HLD) = 0, which other types of polyethers confirmed. On the other hand, when the PO and EO mass ratio equals 1.5, the demulsifier has an overdosing effect with a concentration above 50 mg·L−1. In addition, the dynamic interfacial tension (DIT) results show that dehydration efficiency has a positive correlation with dynamic interfacial activity. This work provides deep insight into physicochemical mechanisms needed to obtain effective demulsification and could help guide the workload of the demulsifier screening.

chemistry, physical
Molecular Dynamics Simulation of Emulsification/Demulsification with a Gas Switchable Surfactant

Xiangliang Liu,Yingjie Li,Senlin Tian,Hui Yan

DOI: https://doi.org/10.1021/acs.jpcc.9b07652

2019-09-24

The Journal of Physical Chemistry C

Abstract:Molecular dynamics simulations were performed to study the reversible emulsification and demulsification processes of a hexadecane/water mixture by a CO2/N2-triggered surfactant named N′-dodecyl-N,N-dimethylacetamidinium bicarbonate(DDAB). Specifically, the simulations reproduced experimental observations, that is, the active form of the surfactant, DDA+, which can stabilize hexadecane/water emulsions in aqueous solution. Furthermore, when DDA+ surfactants were switched to DDA molecules, their inactive form, the surfactant-stabilized emulsion was spontaneously broken, and the oil phase was separated from bulk water. The potential of mean force (PMF) between emulsion and oil droplets showed that the repulsion effect among the DDA+ headgroups played an essential role in stabilizing emulsion. Besides, radial and spatial distribution functions were applied to investigate the hydration behavior of DDA and DDA+. The results demonstrated that the DDA+ headgroups could be fully hydrated with water molecules located around the three methyl groups in the headgroup. Once the headgroup was deprotonated, the headgroup changed into a nonplanar conjugation structure. Moreover, the hydrophilicity of DDA headgroups decreased significantly compared with DDA+. The reversible transformation of the hydrophilicity is the key for switchable surfactants that can be used as an emulsifier and a demulsifier simultaneously. The hydrophilicity of the surfactants was quantified by PMF between surfactants and water, which could be used to compare the hydrophilic difference between the inactive and active forms of the molecule and is expected to help design new switchable surfactants.
Screening and Demulsification Mechanism of Fluorinated Demulsifier Based on Molecular Dynamics Simulation

Xiaoheng Geng,Changjun Li,Lin Zhang,Haiying Guo,Changqing Shan,Xinlei Jia,Lixin Wei,Yinghui Cai,Lixia Han

DOI: https://doi.org/10.3390/molecules27061799

IF: 4.6

2022-03-09

Molecules

Abstract:In order to solve the problem of demulsification difficulties in Liaohe Oilfield, 24 kinds of demulsifiers were screened by using the interface generation energy (IFE) module in the molecular dynamics simulation software Materials Studio to determine the ability of demulsifier molecules to reduce the total energy of the oil–water interface after entering the oil–water interface. Neural network analysis (NNA) and genetic function approximation (GFA) were used as technical means to predict the demulsification effect of the Liaohe crude oil demulsifier. The simulation results show that the SDJ9927 demulsifier with ethylene oxide (EO) and propylene oxide (PO) values of 21 (EO) and 44 (PO) reduced the total energy and interfacial tension of the oil–water interface to the greatest extent, and the interfacial formation energy reached −640.48 Kcal/mol. NNA predicted that the water removal amount of the SDJ9927 demulsifier was 7.21 mL, with an overall error of less than 1.83. GFA predicted that the water removal amount of the SDJ9927 demulsifier was 7.41mL, with an overall error of less than 0.9. The predicted results are consistent with the experimental screening results. SDJ9927 had the highest water removal rate and the best demulsification effect. NNA and GFA had high correlation coefficients, and their R2s were 0.802 and 0.861, respectively. The higher R2 was, the more accurate the prediction accuracy was. Finally, the demulsification mechanism of the interfacial film breaking due to the collision of fluorinated polyether demulsifiers was studied. It was found that the carbon–fluorine chain had high surface activity and high stability, which could protect the carbon–carbon bond in the demulsifier molecules to ensure that there was no re-emulsion due to the stirring external force.

chemistry, multidisciplinary,biochemistry & molecular biology
Experimental study on the effect of high water cut on the emulsifying properties of crude oil

Meiming He,Wanfen Pu,Xuerui Yang,Rui Liu,Mengsheng Xu,Xing Li,Tong Wu,Rui Gou

DOI: https://doi.org/10.1016/j.colsurfa.2023.131917

2023-07-04

Abstract:Most waterflooding oilfields have entered the high water cut stage, but significant amounts of crude oil remain in the formation. Therefore, understanding the emulsifying characteristics of crude oil with high water content is crucial. This study investigates the effects of shear time, shear rate, temperature, water content, and re-emulsification at high water content on the emulsifying properties of crude oil. Results indicate that shear time, temperature, and water content play a role in enhancing the emulsifying capacity of crude oil. Additionally, the initial water content of the emulsion affects the solubilization ability of crude oil; lower initial water content leads to stronger solubilization ability, while higher total water content leads to weaker solubilization capacity. Under an optical microscope, the morphology of the emulsion was observed, revealing that an increase in water content resulted in an increase in particle size and quantity of emulsion droplets, leading to more uniform droplets. However, at high water content, the particle size of emulsion decreased, the number of droplets decreased, and the droplets became uneven. Furthermore, the particle size of re-emulsified emulsion was smaller than that of the emulsion with the same moisture content, indicating that re-emulsification can lead to instability. The interfacial characteristics of the emulsion were also analyzed, showing that an increase in water content caused an increase in interfacial tension and expansion modulus of emulsion compared to crude oil. Finally, the study elucidates the influence mechanism of high-water content on the emulsifying performance of crude oil, which includes the destruction of molecular forces on and between interfaces, weakening the steric hindrance effect. Unstable film and non-uniform droplets can promote coalescence and fragmentation of droplets, limiting the emulsifying performance of crude oil. The results of this study provide a better understanding of the formation and fracture process of emulsion under high water cut conditions, offering a theoretical basis for further enhanced oil recovery.

chemistry, physical
Demulsification of water-in-heavy oil emulsions by oxygen-enriched non-ionic demulsifier: Synthesis, characterization and mechanisms

Xincheng Zhang,Changqing He,Jingjing Zhou,Ying Tian,Lin He,Hong Sui,Xingang Li

DOI: https://doi.org/10.1016/j.fuel.2022.127274

IF: 7.4

2022-12-31

Fuel

Abstract:Separation of water-in-heavy oil (W/HO) emulsions is a critical issue in petroleum industry (especially for the thickened oils and natural bitumen) due to its high viscosity and rigid interfacial film formed by natural stabilizers (e.g., asphaltenes). Herein, two different strategies have been proposed to enhance the demulsification of the W/HO emulsions from the aspects of interfacial reconstruction and bulk oil phase property regulation. Firstly, to break the rigid interfacial film at the oil–water interface, a novel demulsifier (TJU-3, M n : 6131 g/mol) has been successfully designed, introducing high content of carboxyl groups and ester groups to the molecules. The chemical groups, molecular structure, content of oxygen-containing groups, solubility, turbidity and phase distribution rules of TJU-3 have been instrumentally determined. It was observed that TJU-3 performed well in breaking the W/HO emulsions with faster rate (reaching 100% dehydration in less 25 min) and no "tailing phenomenon" compared with other commercial demulsifiers. Secondly, to facilitate the diffusion of demulsifer molecules from bulk oil phase to oil–water interface which promote the demulsification rate, the effect of oil viscosity on the demulsification efficiency has been investigated. Results showed that, after working with demulsifiers, when only one single method (heating or dilution at ambient conditions) was used, the dehydration rate of W/HO emulsions is limited (no more than 50%). When combining demulsifiers with diluents at slight heating conditions, a complete dehydration (∼100%) of W/HO emulsions was obtained, which was optimized at 60 °C, 400 ppm. This synergistic effect was mainly contributed to the fact that viscosity reduction weakens the obstruction of the demulsifier diffusion and increases the average kinetic energy of the thermal movement of demulsifiers. This work would provide insights for developing new low-carbon demulsification separation method for petroleum production.

energy & fuels,engineering, chemical
Analysis of Electric Breakup Characteristics of Emulsion Droplets Based on Dissipative Particle Dynamics Method

Yiyang Geng,Changhai Lv,Xin Yuan,Weiwei Xu

DOI: https://doi.org/10.3390/pr12071467

IF: 3.5

2024-07-14

Processes

Abstract:Crude oil desalination and dehydration are necessary for storage, transportation, and processing procedures. However, the behaviour of fine emulsion droplets under an electric field has always been questioned. This paper modified the dissipative particle dynamics method (DPD) to study the deformation process of fine emulsion droplets under a high-strength electric field. Compared with the literature data, the reliability of the DPD method is confirmed. The influence of the crude oil properties and the electric field characteristics on the behaviour of the emulsion droplet was analysed, and the effect factors included electric field intensity, electric field frequency, emulsion droplet size, centre distance ratio, conservative force intensity, dissipative strength, and crude oil density. The relationship between critical electric field intensity and emulsion droplet deformation was formulated based on the simulational dates.

engineering, chemical

Investigation of demulsification efficiency in water-in-crude oil emulsions using dissipative particle dynamics

Efficient demulsification of cationic polyacrylate for oil-in-water emulsion: Synergistic effect of adsorption bridging and interfacial film breaking

Advancing oil-water separation: Design and efficiency of amphiphilic hyperbranched demulsifiers

Evolution of oil/water interface in the presence of SDBS detected by dual polarization interferometry

Topological isomerism design of Demulsifiers: A fusion of molecular dynamics simulation and experiment

Dissipative Particle Dynamics-Based Simulation of the Effect of Asphaltene Structure on Oil-Water Interface Properties

The Effect of Hydrophobic Modified Block Copolymers on Water–Oil Interfacial Properties and the Demulsification of Crude Oil Emulsions

Dissipative Particle Dynamics Simulation and Microscopic Experimental Study of Emulsification Performance of Surfactant/Polymer Flooding

Molecular Simulations on the Coalescence of Water-in-Oil Emulsion Droplets with Non-ionic Surfactant and Model Asphaltene.

Comparative study on the performance and properties of polyether and polyacrylate crude oil demulsifier

Probing the Demulsification Mechanism of Emulsion with SPAN Series Based on the Effect of Solid Phase Particles

Investigation of Dioctyl Sodium Sulfosuccinate in Demulsifying Crude Oil-in-Water Emulsions

A molecular modeling and experimental study of solar thermal role on interfacial film of emulsions for elucidating and executing efficient solar demulsification

The Paraffin Crystallization in Emulsified Waxy Crude Oil by Dissipative Particle Dynamics

Investigation on the mechanism of heating effect influencing emulsifying ability of crude oil: Experimental and molecular dynamics simulation

Relationship between the dynamic interfacial activity and demulsification performance of hyperbranched poly(amido amine) polyethers

Molecular Dynamics Simulation of Emulsification/Demulsification with a Gas Switchable Surfactant

Screening and Demulsification Mechanism of Fluorinated Demulsifier Based on Molecular Dynamics Simulation

Experimental study on the effect of high water cut on the emulsifying properties of crude oil

Demulsification of water-in-heavy oil emulsions by oxygen-enriched non-ionic demulsifier: Synthesis, characterization and mechanisms

Analysis of Electric Breakup Characteristics of Emulsion Droplets Based on Dissipative Particle Dynamics Method