Photonic generation of multi-format chirped signals with a high switching rate

Yuxiao Guo,Muguang Wang,Yan Li,Jian Wang,Desheng Chen

DOI: https://doi.org/10.1364/ol.497822

IF: 3.6

2023-08-09

Optics Letters

Abstract:Yuxiao Guo, Muguang Wang, Yan Li, Jian Wang, Desheng Chen A novel photonic method for multi-format chirped signal generation with a high switching rate based on a dual-polarization binary phase ... [Opt. Lett. 48, 4272-4275 (2023)]

optics

What problem does this paper attempt to address?

Photonic Generation and Switching of Multi-Format Chirp Waveforms with Anti-Dispersion Transmission

Chongyin Yi,Bo Yang,Tao Jin,Shuna Yang

DOI: https://doi.org/10.1109/lpt.2021.3133881

IF: 2.6

2021-01-01

IEEE Photonics Technology Letters

Abstract:We present a novel photonic approach for generating switchable multi-format chirp waveforms with the capability of anti-chromatic dispersion transmission using a dual-drive Mach-Zehnder modulator (DDMZM). The key functions of the switching among up-, down-, or dual-chirp waveforms and the anti-dispersion transmission are both realized by controlling the bias voltage on the applied modulator. Experiments are conducted to demonstrate the generation and switching of chirp waveforms centered at 4.5 GHz and 4.8 GHz with a bandwidth rate of 0.4 GHz/ $\mu \text{s}$ under back-to-back condition. Besides, another experiment on the transmission of the generated 4.8-GHz signals along dispersive optical fiber is also demonstrated, which verifies the dispersion-induced power fading can be successfully eliminated.
Photonic Approach for Generating Bandwidth-Doubled and Switchable Multi-Format Chirp Waveforms.

Chongyin Yi,Shuna Yang,Bo Yang,Tao Jin,Hao Chi

DOI: https://doi.org/10.1364/ol.420988

2021-01-01

Abstract:A novel photonic approach for generating switchable multi-format chirp RF waveforms is proposed and experimentally demonstrated. The key component in the scheme is a dual-parallel Mach-Zehnder modulator (DPMZM). By properly setting the bias voltage on the DPMZM, different chirp RF waveforms with a doubled bandwidth, including the dual-, up-, and down-chirp waveforms, can be generated, when an unmodulated RF signal and a chirp RF signal are injected. The experiments are implemented to demonstrate the generation of switchable chirp waveforms with bandwidths of 2 and 0.8 GHz. The proposed scheme features its compact structure, easiness in switching control, as well as bandwidth doubling, which has potential applications in multifunctional radars.
Photonic Generation of Switchable Multiformat Chirp Signals With Immunity to Power Fading

Yuan Men,Lin Lin,Aijun Wen,Xiao Xu

DOI: https://doi.org/10.1109/tmtt.2022.3222427

IF: 4.3

2023-04-08

IEEE Transactions on Microwave Theory and Techniques

Abstract:In this article, a photonic approach for the generation of switchable multiformat chirp signals with immunity to power fading by simply adjusting the bias voltages of a dual-polarization binary phase-shift keying (DP-BPSK) modulator is proposed. A parabolic waveform signal with times split is employed to increase the time bandwidth product (TBWP) of the generated chirp signal by times. A proof-of-concept experiment is established to verify the feasibility of the proposed scheme. Major characteristics of the signal are verified, such as format switching capability, frequency tunability, immunity to power fading, and pulse compression performance. The relationship between unwanted frequency components and the amplitude of the split parabolic waveform signal is analyzed by simulation. The maximum bandwidth of the generated chirp signal is also given.

engineering, electrical & electronic
Photonic Generation of Bandwidth-Doubling Dual-Chirp Waveform Using a Dual-Parallel MZM

Chongyin Yi,Hongxia He,Bo Yang,Tao Jin,Hao Chi

DOI: https://doi.org/10.1117/12.2587166

2021-01-01

Abstract:Dual-chirp waveform, as a type of wideband radar signal that can improve the range-Doppler resolution in radar system has been studied widely. In this paper, a photonic scheme for generation of frequency- and bandwidth-doubling dual-chirp waveform is proposed and experimental demonstrated. An integrated dual-parallel MZM is applied, where a microwave signal and a single-chirp signal are modulated, biasing at null and full points, respectively. An electrical rather than optical band-pass filter that used in the system can reduce the complexity. Experimental results perform the generated dual-chirp waveforms with frequency of 6 GHz and bandwidth of 2 GHz. The time-bandwidth product is about 154.2. Potentially, this approach can be a method for high frequency, large bandwidth and long duration dual-chirp waveforms generation.
Anti-chromatic Dispersion Transmission of Dual-chirp Waveform Based on a Single DPMZM

Chongyin Yi,Shuna Yang,Bo Yang,Tao Jin,Hao Chi

DOI: https://doi.org/10.1109/PIERS53385.2021.9695133

2021-01-01

Abstract:Photonic approaches for generating and transmitting dual-chirp waveforms has been extensively studied recently. In this paper, a simplified scheme to generate and transmit dual-chirp waveforms with elimination of the dispersion-induced power fading is proposed. An integrated dual-parallel Mach-Zehnder modulator (DPMZM) which consists of two sub-MZMs and a phase shifter (PS) is utilized. We apply an unmodulated microwave signal as well as a baseband chirped waveform to two RF ports of DPMZM respectively, in which carrier-suppressed modulations are implemented. Then we control the PS to suppress the power fading introduced by fiber transmission. Thanks to the use of DPMZM and convenient adjustment of a direct current (DC) voltage applied to PS, the proposed scheme owns a simple structure under the condition that it can produce dual-chirp waveforms with anti-chromatic dispersion transmission. Both theoretical derivation and experimental verification are performed. In the experiments, dual-chirp waveforms centered at 14 GHz and 20 GHz with a bandwidth of 1 GHz are successfully generated and transmitted through a roll of 20 km and 10 km single-mode fibers with elimination of power fading effects. The waveform power is increased by 8.2 dB, compared with those suffering from the power fading. Different DC voltages of 2.635 V and 6.877 V are set, respectively. Since the DC voltage that determines the phase shift is related to the fiber length and signal frequency, their relationships are demonstrated experimentally. The instantaneous bandwidth limitation of the dual-chirp waveform is discussed. The feasibility of the dual-chirp waveform transmitter for one-to-multi-transmission is also discussed.
Photonic generation and programmable switching of variable-band chirped waveforms with immunity to power fading

Shuna Yang,Xu Qin,Bo Yang,Hao Chi

DOI: https://doi.org/10.1364/OL.528652

2024-09-15

Abstract:A photonic approach for generating and programmable switching variable-band chirped waveforms by using a dual-parallel Mach-Zehnder modulator (DPMZM) is proposed and experimentally demonstrated. By coupling binary switching codes with the baseband chirped signal and applying them into the RF input port of DPMZM, the variable-band chirped waveforms can be generated and fast switched. The switching speed is consistent with the input code bit rate. Moreover, by properly adjusting the bias voltages, the generated signals can be anti-dispersion transmitted over different distances. Full experimental verification on the generation and programmable switching of the chirped waveforms centered at 2.1, 6.3, and 8.4 GHz or 1.5, 4.5, and 6 GHz over 10 or 20 km standard single-mode fibers with 4 or 100 Mbps switching rates are successfully carried out. The proposed approach features compact architecture, programmable switching capability and immunity to power fading, which are significant in distributed multifunction radar networks with optical fiber-based transmission.
Integrated Electro-Optic Control of Biphoton Generation Using Hybrid Photonics

Xiaoxi Wang,Viphretuo Mere,Forrest Valdez,Shayan Mookherjea

DOI: https://doi.org/10.1364/opticaq.497702

2023-01-01

Abstract:Parametric sources in quantum optics usually require some form of spectro-temporal control for conditional generation of high-purity single-photon states, but their properties have not yet been optimized using integrated microchips. Using external short-pulse lasers and separate devices for pump preparation and for photon generation, as is traditional, incurs many impediments such as reduced performance, increased loss, high cost, and limited scalability. To overcome these limitations, here we demonstrate a circuit including high-bandwidth, high-extinction ratio electro-optic modulators for pump-pulse preparation fully integrated with high-quality factor ( Q ) microresonators for efficient parametric nonlinearity, together with seamlessly interconnecting waveguides. The microchip uses different optical materials on a common platform and a multi-layer integrated photonic architecture. Using this, we control the joint spectrum of room-temperature biphoton generation for the first time on a single integrated microchip, and demonstrate that the theoretical purity bound can be achieved.
Photonic Generation of Chirped Microwave Signals with High Time-Bandwidth Product

Yuan Mei,Yuxiao Xu,Hao Chi,Xianmin Zhang,Xiaofeng Jin,Shilie Zheng,Tao Jin

DOI: https://doi.org/10.1016/j.optcom.2013.12.004

IF: 2.4

2014-01-01

Optics Communications

Abstract:A photonic approach to generating chirped microwave signal with high time-bandwidth product (TBWP) is proposed. The scheme utilizes the linear frequency-to-time mapping of a spectrally-shaped optical pulse propagating through a dispersive element. A mode-locked laser for generating short optical pulses and a programmable optical filter (POF) to shape the spectrum of the pulses are employed. Experiment results show that the chirped signal with a TBWP and compression ratio both in excess of 60 is achieved. We also estimate theoretically the maximum TBWP that can be achieved over 300 under the constraint of the finite frequency resolution of the applied POF. The effect of higher order dispersion on the generated RF pulses and the TBWP is also investigated.
Photonic Generation of Dual-Chirp Waveforms with Improved Time-Bandwidth Product

Yuxiao Xu,Tao Jin,Hao Chi,Shilie Zheng,Xiaofeng Jin,Xianmin Zhang

DOI: https://doi.org/10.1109/lpt.2017.2712192

IF: 2.6

2017-01-01

IEEE Photonics Technology Letters

Abstract:We present a photonic method for the generation of dual-chirp signals. In this approach, a single-tone RF signal is first modulated using a modulator in order to generate two optical carriers, which are further modulated by a linearly chirped signal by another modulator. Square-law detection in a photodiode then generates a dual-chirp signal whose center frequency and time-bandwidth product (TBWP) are fourfold increased. The dual-chirping and the improved TBWP can improve the range resolution of the radar system and help avoid the range measurement error caused by the range-Doppler coupling effect. The generation of bandwidth-quadrupled S-band dual-chirp waveforms is demonstrated experimentally. The processing of the dual-chirp signal is also discussed, in order to show its advantages over single-chirp signals. We believe that the proposed approach is a potential solution for the generation of dual-chirp signals with high center frequency and large bandwidth in modern radar systems.
Photonic Generation of Terahertz Dual-Chirp Waveforms Ranging from 364 to 392 GHz.

Shiwei Wang,Lu Zhang,Zijie Lu,Hongqi Zhang,Mengyao Qiao,Nazar Idrees,Muhammad Saqlain,Shilie Zheng,Xiaofeng Jin,Xianmin Zhang,Xianbin Yu

DOI: https://doi.org/10.1364/oe.422407

IF: 3.8

2021-01-01

Optics Express

Abstract:In this paper, we propose and experimentally demonstrate a photonic scheme based on frequency doubling and photo-mixing to generate dual-chirp signals in the terahertz (THz) band. A broadband dual-chirp THz signal with 28 GHz bandwidth, ranging from 364 GHz to 392 GHz, is successfully generated in the proof-of-concept experiment, resulting in a chirp rate of 0.028 GHz/ns for both up chirp and down chirp signals. THz dual-chirp signals featuring a large bandwidth are beneficial to enable high resolution and high accuracy by mitigating the range measurement error induced by the range-Doppler coupling effect. Therefore, the proposed system is expected to have a great potential for future THz radar applications.
Photonic approach to linearly chirped microwave waveform generation with large time–bandwidth product capability

Yuhua Xing,Wenhao Shi,Kun Zhang

DOI: https://doi.org/10.1007/s10043-019-00565-9

IF: 1.2

2019-11-18

Optical Review

Abstract:Photonic approach to generating linearly chirped waveforms with large time–bandwidth product (TBWP) is proposed and demonstrated. In the approach, a dual-output dual-parallel Mach–Zehnder modulator (DPMZM) is employed to generate dual-tone wavelengths in the two output ports. The polarization modulator (PolM) is employed to conduct complementary phase modulation of the dual-tone wavelengths. After driving PolM with parabolic signal, frequency-doubled chirped microwave waveform will be obtained from photodetector (PD). To enlarge the TBWP, parabolic waveform is split into time domain and convolved with binary sequences to increase the bandwidth and temporal duration of the generated signal simultaneously. Simulation results show that linearly chirped microwave waveforms with carrier frequency of 40 GHz, bandwidth of 12.5 GHz, time duration of 819.2 ns are generated. After splitting and code-convolving with binary sequence, TBWP of the generated signal is enlarged to 10,240. Pulse compression performances of the generated signal are analyzed, and structure stability is also investigated.

optics
Photonic-based dual-chirp microwave waveforms generation with multi-carrier frequency and large time-bandwidth product

Kun Zhang,Shanghong Zhao,Yongjun Li,Xuan Li,Tao Lin,Wei Jiang,Guodong Wang,He Li

DOI: https://doi.org/10.1016/j.optcom.2020.126076

IF: 2.4

2020-11-01

Optics Communications

Abstract:Photonic-based dual-chirp microwave waveform generation with multi-carrier frequencies and large time-bandwidth product (TBWP) is proposed. In the approach, a polarization modulator is employed to introduce parabolic phase difference into the injected optical signals. After heterodyne detection in balanced photodetector, dual-chirp microwave waveforms with multi-carrier frequencies are generated. To remedy the TBWP limitation, approach based on splitting parabolic waveform is employed to increase the bandwidth of the generated waveforms while controlling the temporal duration unchanged. The generator features multi-band generation ability and large TBWP performance. Simulations show that bandwidth of the generated signals are increased by N/2 times after splitting the parabolic waveform into N pieces. Four-band dual-chirp signals with bandwidth of 7.32 GHz and TWBP of 6000 are generated. Auto-correlations of the generated waveforms exhibit good pulse compression performance. Ambiguity functions of the generated signals are analyzed, polarization offsets and approach limitations are also investigated.

optics
Photonic generation of millimeter-wave and multi-waveform signals based on external modulation and polarization control.

Ying Mei,Jinbo Liu,Jin Yuan,Qisong Liu,Meng Zhang

DOI: https://doi.org/10.1364/ao.470531

IF: 1.9

2022-09-28

Applied Optics

Abstract:An approach for photonic generation of multi-function microwave/pulse signals has been proposed and verified, which is capable of achieving Nyquist/triangular pulse signals and frequency quadrupling/12-tupling microwave signals. Based on optical carrier suppressed modulation in a dual-parallel Mach-Zehnder modulator, a four-line optical frequency comb and a Nyquist pulse are generated. Subsequently, polarization controlling using an optical interleaver and a linear polarizer is conducted to manipulate spectra, after which a pulse signal with triangular shape and a microwave signal with high-frequency multiplication factor are generated. By applying a 10-GHz RF driving signal, a Nyquist pulse and a full-duty-cycle triangular pulse with repetition frequency of 40 GHz, and 40-/120-GHz millimeter-wave signals can be obtained. This proposal provides the potential of higher-frequency multi-waveform and millimeter-wave signals generator for an all-optical network.

Engineering,Medicine,Physics
Photonic Generation of a Tunable Dual-Chirp Microwave Waveform

Zhiqiang Fan,Xiang Li,Lei Ao,Jun Su,Yunxiang Wang,Shuangjin Shi,Qi Qiu

DOI: https://doi.org/10.1109/jlt.2022.3184332

IF: 4.7

2022-01-01

Journal of Lightwave Technology

Abstract:A photonic-assisted tunable dual-chirp microwave waveform generator based on optical heterodyne detection is proposed and experimentally demonstrated. In the proposed scheme, a three-electrode distributed Bragg reflector laser diode (DBR-LD) is used to generate a broadband frequency-chirped optical pulse. A stable optical fiber laser and a Mach-Zehnder modulator (MZM) are used to perform a double-sideband suppressed carrier (DSB-SC) signal. The frequency difference between the two sidebands of the DSB-SC signal is larger than the frequency chirp range of the optical pulse. By tuning the center frequency of the optical pulse equals that of the DSB-SC signal and beating the optical pulse and the DSB-SC signal at a photodetector (PD), a dual-chirp microwave waveform is generated. The center frequency of the generated waveform is tuned by adjusting the modulated frequency of the DSB-SC signal. The tunability of the bandwidth and the temporal duration are achieved by tuning the optical pulse. Experimental results show that the center frequency, the bandwidth, and the temporal duration have tuning ranges from 7 to 13 GHz, 13 to 17 GHz, and 500 ns to 50 μs, respectively. Chirp rates up to ±26 GHz/μs for the up- and down-chirp waveforms are measured in the experimental demonstration, respectively. The demonstration shows new avenues to implement high-performance dual-chirp microwave waveform generators for applications in modern radar systems with improved range-Doppler resolution.
Switchable Circularly Polarized Signals with High Asymmetric Factor Triggered by Dual Photonic Bandgap Structure (Small 49/2022)

Chengliang Duan,Bin Wang,Jinpeng Li,Jun Xu,Jinsong Zeng,Jun Li,Zujin Zhao,Wenhua Gao,Guangdong Ying,Kefu Chen

DOI: https://doi.org/10.1002/smll.202270268

IF: 13.3

2022-12-10

Small

Abstract:Smart Photonic Materials In article number 2204199, Bin Wang, Jinpeng Li, Guangdong Ying, and co‐workers construct a dual photonic bandgap structure to achieve flexible switching of intensity, wavelength, and direction of circularly polarized luminescence accompanied by ultra‐high asymmetry factor values. This work provides insights into the real‐time manipulation of circularly polarized signals by chiral photonic materials.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Characterization of the Photonic Generation of Phase-Coded Rf Signals Based on Pulse Shaping and Frequency-To-Time Mapping

Yuan Mei,Tao Jin,Hao Chi,Shilie Zheng,Xiaofeng Jin,Xianmin Zhang

DOI: https://doi.org/10.1364/ao.54.003956

IF: 1.9

2015-01-01

Applied Optics

Abstract:Photonic generation of arbitrary waveforms based on pulse shaping and frequency-to-time mapping is of great interest since it offers an effective way to generate complex signals with large bandwidth. In this paper, we mathematically study the photonic generation of phase-coded radio frequency (RF) signals based on pulse shaping and frequency-to-time mapping in detail. By mathematically analyzing the process of signal generation and utilizing the less restrictive dispersion requirement, a design criterion for the generation of well-shaped phase-coded RF waveforms is presented, by which we can properly set the spatial light modulator in the pulse shaper and dispersion in the system according to the carrier frequency and modulating frequency of the desired waveform. In addition, the maximum achievable time-bandwidth product of phase-coded RF signals that can be generated is estimated. The theory is verified by numerical and experimental results. The presented results can be used to guide the design of a photonic system for the generation of high-quality phase-coded RF signals. (C) 2015 Optical Society of America
Photonic Generation and Transmission of Linearly Chirped Microwave Waveform With Increased Time-Bandwidth Product

Kun Zhang,Shanghong Zhao,Yufu Yin,Tao Lin,Xuan Li,Wei Jiang,Guodong Wang

DOI: https://doi.org/10.1109/access.2019.2909738

IF: 3.9

2019-01-01

IEEE Access

Abstract:Photonic generation and transmission of linearly chirped microwave waveform with the increased time-bandwidth product (TBWP) is proposed and demonstrated by phase-encoding and splitting parabolic waveform. In the approach, dual-polarization Mach–Zehnder modulator (DPol-MZM) along with polarization controller (PC) is employed to generate two orthogonally polarized wavelengths, and polarization modulator is driven by a parabolic signal. After splitting parabolic waveform and convolving with a binary pseudo random sequence, chirped microwave waveform with high bandwidth and large temporal duration is generated, corresponding to an improved TBWP. Dispersion-induced power fading can be effectively avoided in the approach, and chirped signal with constant initial phase can be achieved by adjusting the PC. The proposed approach is verified by simulations. Linearly chirped microwave waveform with the central frequency of 40 GHz, bandwidth of 12.5 GHz, and TBWP of 20160 is generated. RF spurious suppression ratios of the generated signal are investigated, and pulse compression performances are also analyzed. The system features filter-free, high tunability, compact structure, and large TBWP, which has potential application in the modern radar system.

computer science, information systems,telecommunications,engineering, electrical & electronic
Multiwavelength 25-Ghz Picosecond Pulse Generation with Phase Modulation and Double-Side Mamyshev Reshaping.

Li Huo,Hongfeng Li,Dong Wang,Qiang Wang,Caiyun Lou

DOI: https://doi.org/10.1364/ao.54.005703

IF: 1.9

2015-01-01

Applied Optics

Abstract:We demonstrate a simple, robust, and cost-effective method of generating high-speed multiwavelength picosecond optical pulses. This method is based on chirp compression of phase-modulated light, followed by nonlinear pulse compression and reshaping with a double-side Mamyshev reshaper. We show that this method becomes power efficient when the repetition rate is increased to 25 GHz. Wavelength-tunable optical pulses with a repetition rate of 25 GHz and pulse width of ∼2 ps, which can be temporally multiplexed to 100 GHz, are experimentally obtained over a large spectral range with moderate electrical and optical power. Simultaneous pulse generation on four wavelengths is demonstrated.
Photonic Generation of Phase-Stable and Wideband Chirped Microwave Signals Based on Phase-Locked Dual Optical Frequency Combs

Yitian Tong,Qian Zhou,Daming Han,Baiyu Li,Weilin Xie,Zhangweiyi Liu,Jie Qin,Xiaocheng Wang,Yi Dong,Weisheng Hu

DOI: https://doi.org/10.1364/ol.41.003787

2016-01-01

Abstract:A photonics-based scheme is presented for generating wideband and phase-stable chirped microwave signals based on two phase-locked combs with fixed and agile repetition rates. By tuning the difference of the two combs' repetition rates and extracting different order comb tones, a wideband linearly frequency-chirped microwave signal with flexible carrier frequency and chirped range is obtained. Owing to the scheme of dual-heterodyne phase transfer and phase-locked loop, extrinsic phase drift and noise induced by the separated optical paths is detected and suppressed efficiently. Linearly frequency-chirped microwave signals from 5 to 15 GHz and 237 to 247 GHz with 30 ms duration are achieved, respectively, contributing to the time-bandwidth product of 3×108. And less than 1.3×10-5 linearity errors (RMS) are also obtained.
Single-modulator based multi-format switchable signal generator without background noise

Sha Zhu,Zhijie Chen,Yunxin Wang,Ya Jin,Kunpeng Zhai,Yunping Bai,Jun Tan,Peiyuan Wan,Xu Liu,Wei Li,Ning Hua Zhu

DOI: https://doi.org/10.1109/jlt.2022.3164413

IF: 4.7

2022-01-01

Journal of Lightwave Technology

Abstract:A photonic multi-format background-free binarily modulated microwave signal generator using a single dual-polarization dual-parallel MachZehnder modulator is proposed and demonstrated. The proposed generator features good reconfiguration and switchability. By simply adjusting the direct current biases of the modulator, amplitude shift keying (ASK), phase shift keying (PSK) and frequency-shift keying (FSK) microwave signals can be generated. Benefiting from the complementary intensity modulation, there is no residual baseband modulated signal in the generated binarily modulated signals. The system does not involve any optical or electrical filters, which ensures good tunability of the generator. By changing the frequency of the driven microwave carrier and bit rate of the electrical coded signal, the frequency and rate of the generated multi-format signals can be adjusted accordingly. The multi-format switchable signal generator has great potential in multi-functional communication and radar systems.

engineering, electrical & electronic,optics,telecommunications

Photonic generation of multi-format chirped signals with a high switching rate

Photonic Generation and Switching of Multi-Format Chirp Waveforms with Anti-Dispersion Transmission

Photonic Approach for Generating Bandwidth-Doubled and Switchable Multi-Format Chirp Waveforms.

Photonic Generation of Switchable Multiformat Chirp Signals With Immunity to Power Fading

Photonic Generation of Bandwidth-Doubling Dual-Chirp Waveform Using a Dual-Parallel MZM

Anti-chromatic Dispersion Transmission of Dual-chirp Waveform Based on a Single DPMZM

Photonic generation and programmable switching of variable-band chirped waveforms with immunity to power fading

Integrated Electro-Optic Control of Biphoton Generation Using Hybrid Photonics

Photonic Generation of Chirped Microwave Signals with High Time-Bandwidth Product

Photonic Generation of Dual-Chirp Waveforms with Improved Time-Bandwidth Product

Photonic Generation of Terahertz Dual-Chirp Waveforms Ranging from 364 to 392 GHz.

Photonic approach to linearly chirped microwave waveform generation with large time–bandwidth product capability

Photonic-based dual-chirp microwave waveforms generation with multi-carrier frequency and large time-bandwidth product

Photonic generation of millimeter-wave and multi-waveform signals based on external modulation and polarization control.

Photonic Generation of a Tunable Dual-Chirp Microwave Waveform

Switchable Circularly Polarized Signals with High Asymmetric Factor Triggered by Dual Photonic Bandgap Structure (Small 49/2022)

Characterization of the Photonic Generation of Phase-Coded Rf Signals Based on Pulse Shaping and Frequency-To-Time Mapping

Photonic Generation and Transmission of Linearly Chirped Microwave Waveform With Increased Time-Bandwidth Product

Multiwavelength 25-Ghz Picosecond Pulse Generation with Phase Modulation and Double-Side Mamyshev Reshaping.

Photonic Generation of Phase-Stable and Wideband Chirped Microwave Signals Based on Phase-Locked Dual Optical Frequency Combs

Single-modulator based multi-format switchable signal generator without background noise