Abstract:Dielectric elastomer actuator (DEA) show promise for mechatronic applications due to the advantages of dielectric elastomer, such as lightweight, flexible, low cost, high strain, etc, and many configurations of DEAs have been demonstrated. As a kind of linear actuator, cone DEAs are studied in some laboratory prototypes due to easy manufacturing, however, their performance have not been exploited fully. Based on the working principle of DEA, a four-bar linkage mechanism is designed to provide negative stiffness preload, which can increase displacement output of actuator (outer diameter 100 mm) to 17 mm. Three cone actuating units are assembled in parallel to enhance the maximum force output to 5.07 N. Loading experiments of actuator in forward and backward strokes are performed, the experimental results show that backward stroke has stronger actuating capability than forward stroke, accordingly application of actuator is recommended. Four factors rather than applied voltage, i.e., number of actuating units, pre-stretch ratio, inner diameter, and outer diameter, are determined as influencing factors for Taguchi method. Then the performance objectives of actuator, i.e., displacement output, maximum force output, and maximum work in backward stroke, are investigated based on L(9)(3(4)) Taguchi orthogonal design. The mean signal-to-noise (S/N) ratio based on the larger-the-better criterion is calculated according to the acquired displacement and force output. Analytical results show that outer diameter has the most significant influence on displacement output, and maximum force out and work output are influenced most by number of actuating units. Inner diameter also has an important effect on the performance objectives of actuator, while pre-stretch ratio has the least influence. The proposed performance investigation is helpful for the design and application of cone actuator in mechatronic system.

Antagonistic cone dielectric elastomer actuator: Analysis, experiment and application

Review of Soft Linear Actuator and the Design of a Dielectric Elastomer Linear Actuator

Modelling and Control of a Dielectric Elastomer Actuator

Control of Dielectric Elastomer Soft Actuators Using Antagonistic Pairs

Self-healing High-performance Dielectric Elastomer Actuator with Novel Liquid-solid Interpenetrating Structure

Tunable Actuation of Dielectric Elastomer by Electromechanical Loading Rates

Spatially Modulus-Patterned dielectric elastomer actuators with oriented electroactuation

The Behavior of Dielectric Elastomer Actuators Connected in Series and Parallel

Thermoplastic Dielectric Elastomer of Triblock Copolymer with High Electromechanical Performance.

On the Mechanical Power Output Comparisons of Cone Dielectric Elastomer Actuators

Modeling and Actuation Performance Analysis of Conically-Shaped Dielectric Electroactive Polymer Actuator

Design of Facile Dielectric Elastomer-Based Bending Module for Soft Robotics Applications

Electromechanical characteristic analysis of a dielectric electroactive polymer (DEAP) actuator

Performance Investigation of Cone Dielectric Elastomer Actuator Using Taguchi Method

Implementation and Simulation of a Cone Dielectric Elastomer Actuator

Design, Fabrication and Analysis of a Novel Membrane Dielectric Elastomer In-Plane Actuator

Design Analysis and Actuation Performance of a Push-Pull Dielectric Elastomer Actuator

Modeling and Control of a Dielectric Elastomer Actuator

An Integrated Design and Fabrication Strategy for Planar Soft Dielectric Elastomer Actuators

Dynamic modeling of dielectric elastomer actuator with conical shape

Homogeneous Large Deformation Analysis of a Dielectric Elastomer Peristaltic Actuator