Abstract:As the advancement of deep earth energy engineering in the 21st century, the challenges imposed by dynamic loads and high temperatures will be increasingly regular. This paper studied the dynamic mechanical behaviors and fracture characteristics of defective red sandstone (single fissure inclination of 0°, 30°, 60°, and 90°) subjected to thermal treatments (25 °C, 200 °C, 400 °C, 600 °C, and 800 °C) under descending amplitude low cycle (DALC) impact loading. The experiments were conducted using a modified split Hopkinson pressure bar (SHPB) system, and the fracture surfaces of the failed specimens were characterized through the use of high-resolution 3D laser scanning to obtain point cloud data. Subsequently, the fractal, roughness, texture, and elevation features of fracture surfaces were analyzed using the boxing-counting method, grayscale co-occurrence matrix (GLCM), and elevation-based statistics. The scanning electron microscopy (SEM) was utilized to study the fracture micromorphology as well. Additionally, the mechanisms of damage and fracture evolution were discussed based on the results of X-ray diffractometry (XRD), synchronous thermal analysis (STA), discrete element method (DEM), and strain energy density theory. The results demonstrate that the peak stress and dynamic elastic modulus deteriorate with rising temperatures and increase with larger fissure angles. While the peak strain, strain rate, and peak stress increase factor (PIF) exhibit the opposite trend. The threshold values for the intensification of these events are 400 °C and 60°. The damage is dominated by tensile cracks, which transition to shear at 30° and 60° due to temperature dependence. Meanwhile, the fractal dimension (D C ), joint roughness coefficient (JRC), second-order statistics of GLCM, and elevation eigenvalues have been modeled using multiple regression analysis to investigate their interaction with temperature and fissure angle. The best-fit models illustrate significant linear or non-linear correlations between the aforementioned parameters and the mechanical parameters. Furthermore, the magnitude and distribution pattern of thermal cracks, as well as the growth of shear fractures, are governed by the dehydration, thermal expansion, phase transition, plasticization, thermal fracture, and thermal decomposition. Finally, strain energy density theory manifests promising prospects for understanding and predicting DALC impact fracture patterns of specimens.

Experimental study on the effect of particle breakage on the shear characteristics of large-displacement soil exposed to heat treatment

Experimental study on the shear characteristics of quartz sand exposed to high temperatures

Influence of the thermal effect on quasi-static shear characteristics of calcareous soil: an experimental study

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

Mechanical behavior and fracture characteristics of high-temperature sandstone under true triaxial loading conditions

Breakage behavior of silica sands during high-pressure triaxial loading using X-ray microtomography

Effect of particle breakage on the shear strength of calcareous sands

Thermal effects on the shear behaviour of saturated coarse-grained soils with reference to post-earthquake deposits

Study on dynamic fracture properties of sandstone under the effect of high-temperature using large-scale sample

Effects of high temperature on the mechanical behaviors of sandstone under true-triaxial unloading conditions

Experimental investigation of a fissured rock with thermal storage potential subjected to descending amplitude low cycle impacts

The Sequence of Heating and Loading Affects Shear Properties of Granite Fractures Under High Temperature

Experimental Study on Thermal Damage and Energy Evolution of Sandstone after High Temperature Treatment

DEM studies on the effect of particle breakage on the critical state behaviours of granular soils under undrained shear conditions

Shear behavior of thermally damaged rock using the bonded-particle model based on moment tensor

Combined effects of high temperature and lithology on the tensile mechanical damage and fracture surface morphology of reservoir rocks

Experiment Study on Shear Behavior and Properties of Granite Fractures under Real-time High-temperature Conditions

Thermal Effects on Tension Softening Response and Fracture Characteristics of Quartz-Diorite

Dynamic Splitting Experimental Study on Sandstone at Actual High Temperatures under Different Loading Rates

Breakage Characteristics of Quartz Sand Based on Ring Shear Tests: Implications for the Fragmentation Processes of Rock Avalanches

The impact of high temperature on mechanical properties and behaviors of sandstone