Abstract:This paper studies the unmanned aerial vehicle (UAV)-enabled integrated sensing and communication (ISAC), in which UAVs are dispatched as aerial dual-functional access points (APs) that can exploit the UAV maneuver control and strong line-of-sight (LoS) air-to-ground (A2G) links for efficient communication and sensing. In particular, we consider that one UAV-AP, equipped with a vertically placed uniform linear array (ULA), sends combined information and sensing signals to communicate with multiple users and at the same time sense potential targets at interested areas on the ground. Under this setup, we consider two scenarios with quasi-stationary and fully mobile UAVs, in which the UAV is deployed at an optimizable location over the whole ISAC mission period and can fly over different locations during the ISAC mission period, respectively. For the two scenarios, our objective is to jointly design the UAV maneuver (deployment location or flight trajectory) and the transmit beamforming, for maximizing the weighted sum-rate throughput of communication users, while ensuring the sensing beampattern gain requirements, subject to the transmit power and flight constraints. However, due to the ULA consideration at the UAV, the two formulated problems are highly non-convex and very difficult to be optimally solved, as the UAV's location/trajectory variables are involved on the exponent parts of each entry in the steering vectors, and are closely coupled with the transmit beamforming vectors. To tackle this issue, we propose efficient algorithms to find their suboptimal but high-quality solutions, by using various techniques from convex and non-convex optimization. Finally, numerical results are provided to validate the superiority of our proposed designs as compared to various benchmark schemes with heuristic maneuver designs. It is shown that the joint maneuver and transmit beamforming design efficiently balances the inherent tradeoff between sensing and - ommunication with regards to different beampattern gain thresholds.

Deployment and Robust Hybrid Beamforming for UAV MmWave Communications

Robust Hybrid Beamforming for Jittering UAV with MmWave Antenna Array

Cooperative Hybrid Beamforming Design in Multi-UAV MmWave MIMO Systems.

Joint Deployment, Beamforming and Power Allocation of MmWave Full-Duplex UAV-BS

Adaptive Hybrid Beamforming for UAV mmWave Communications against Asymmetric Jitter

Unmanned Aerial Vehicle Base Station (UAV-BS) Deployment with Millimeter-Wave Beamforming

Joint Design of Power Allocation, Beamforming, and Positioning for Energy-Efficient UAV-Aided Multiuser Millimeter-Wave Systems

Multi-UAV Aided Millimeter-Wave Networks: Positioning, Clustering, and Beamforming

Adaptive Beam Design for UAV Network with Uniform Plane Array

Low Complexity Hybrid Beamforming For Mmwave-Uav Communication Systems With A Pre-Defined Codebook

Joint Altitude and Hybrid Beamspace Precoding Optimization for UAV-Enabled Multiuser Mmwave MIMO System.

Position-Based Beamforming Design for UAV Communications in LTE Networks.

UAV Beam Alignment for Highly Mobile Millimeter Wave Communications

Location-Based Robust Beamforming Design for Cellular-Enabled UAV Communications.

Robust Secure Energy Efficient Beamforming for mmWave UAV Communications With Jittering

Location Information Assisted Mmwave Hybrid Beamforming Scheme for 5G-Enabled UAVs

Joint Maneuver and Beamforming Design for UAV-Enabled Integrated Sensing and Communication

Distributed beamforming design for UAV‐based integrated communication and jamming systems

Joint Resource Allocation and 3D Deployment for Multi-UAV Covert Communications

Adaptive Beamwidth Control for UAV Mm Wave Communications under Jittering Effects.

Collaborative Beamforming for UAV Networks Exploiting Swarm Intelligence