Safe excavation of large section tunnels with Earth Pressure Balance Tunnel Boring Machine in gassy rock masses: The Sparvo tunnel case study

Annalisa Bandini,Paolo Berry,Carlo Cormio,Marco Colaiori,Andrea Lisardi

DOI: https://doi.org/10.1016/j.tust.2017.05.001

IF: 6.9

2017-08-01

Tunnelling and Underground Space Technology

Abstract:In the last decades mechanized tunnelling with Tunnel Boring Machines (TBMs) has spread, due to the sensible technological developments, allowing for higher advancement rates, huge excavation diameters (up to 17m) and lower excavation costs.Methane inflows from gassy rock masses may represent a serious hazard in underground excavations and could cause expensive delays and, at worst, tragic accidents to workers. Consequently, if methane-air mixtures may be present, a safety engineering system should be designed and set up before starting the excavation works in order to prevent fires or explosions.Due to the impossibility to prevent the contemporary presence of explosive gas-air mixtures and ignition sources, TBMs have never been adopted for tunnelling in gassy rock masses until 2011 (excluding the tunnels excavated with TBM, where methane gas hazard was underestimated, consequently producing delays and unpredicted expenses).The paper describes the safety engineering system developed for the excavation of the Sparvo twin tunnels (Italy) with EPB–TBM. The machine (Herrenknecht S-574) was specifically designed to prevent the risk of having explosive gas-air mixtures and ignition sources in the same place and at the same time, hydraulically confining the volumes inside the machine. After a brief description of the case study, the paper illustrates the design criteria, the technological solutions adopted for the construction of the Herrenknecht S-574 and the operating procedures. Then, the paper focuses on examining and interpreting the methane monitoring results during Sparvo tunnel construction, that highlight the presence of huge volumes of methane. The developed safety engineering system allowed tunnelling without interruptions even with sensible gas flows. Current limits and possible improvements to the safety system described are also discussed.

construction & building technology,engineering, civil