Abstract:The paper theoretically and experimentally analyzes free vibration characteristics of statically loaded moving boundary type curved beam considering rotary inertia and shear deformation effects. Effects of rotary inertia and shear deformation are observed for different thickness to span ratios of curved beam. The subject problem is decoupled into two interrelated problems: determining equilibrium configuration under static load and finding the corresponding free vibration frequency. The static problem is analyzed incrementally in body fitted curvilinear frame as it involves geometric nonlinearity due to generalized curvature, large deformation, and moving boundaries. Variational energy principle is employed to derive governing equation. The nonlinear governing equation associated with complicated boundary conditions is solved through iterative geometry updation. Once static problem is solved for current load step, governing equation for dynamic characteristics is derived using Hamilton’s principle. The governing equation gets linearized by using the static configuration, which finally yields a linear eigenvalue problem. Experiment is performed in a dedicated setup with two master leafs having different thickness to span ratios. The roller supported specimens are excited with an instrumented hammer and response signals are captured by accelerometers. The excitation and response signals are recorded using HBM-MX840B data acquisition system. Frequency response functions of the curved beam systems under different static loads are obtained from postprocessing of the dynamic signals in MATLAB®. First two natural frequencies of the specimens are noted from the experimental results and the corresponding theoretical results are generated. The specimens are also modeled in ABAQUS® CAE and finite element results are computed. Comparison between the theoretical, experimental, and finite element results validates the present model. The study also provides some meaningful observations on effects of rotary inertia and shear deformation. Based on the observations, more results are generated for different thickness to span ratios and findings are reported suitably.

Bernstein polynomials in analyzing nonlinear forced vibration of curved fractional viscoelastic beam with viscoelastic boundaries

Nonlinear Forced Vibration of Curved Beam with Nonlinear Viscoelastic Ends

Vibration Analysis of Geometrically Nonlinear and Fractional Viscoelastic Cantilever Beams

Numerical Analysis of Viscoelastic Rotating Beam with Variable Fractional Order Model Using Shifted Bernstein–Legendre Polynomial Collocation Algorithm

Linear and nonlinear vibration of non-uniform beams on two-parameter foundations using p-elements

Numerical analysis of fractional viscoelastic column based on shifted Chebyshev wavelet function

A unified variational method for vibration of functionally graded porous beams with variable curvature under arbitrary boundary condition

Nonlinear Random Vibration Suppression Analysis of Viscoelastic Sandwich Cantilever Beams

Stochastic Vibration Response of a Sandwich Beam with Nonlinear Adjustable Visco-Elastomer Core and Supported Mass

Nonlinear Random Response Characteristics of Viscoelastic Sandwich Beams under Gaussian Excitations

Nonlinear Dynamic Analysis of a Curved Sandwich Beam with a Time-Dependent Viscoelastic Core Using the Generalized Differential Quadrature Method (GDQM)

Anomalous Nonlinear Dynamics Behavior of Fractional Viscoelastic Structures

A Variational Formulation for Vibration Analysis of Curved Beams with Arbitrary Eccentric Concentrated Elements

A Numerical Method for Simulating Viscoelastic Plates Based on Fractional Order Model

Nonlinear Vibration Analysis of a Fractional Dynamic Model for the Viscoelastic Pipe Conveying Fluid

Nonlinear Parametric Vibration Of Axially Moving Beams: Asymptotic Analysis And Differential Quadrature Verification

Nonlinear vibration analysis of functionally graded beams considering the influences of the rotary inertia of the cross section and neutral surface position

Free vibration analysis of large deformed curved beam incorporating rotary inertia and shear deformation effects and its experimental validation

Numerical analysis of fractional nonlinear vibrations of a restrained cantilever beam with an intermediate lumped mass

Layerwise Analyses of Compact and Thin-Walled Beams Made of Viscoelastic Materials

Nonlinear Vibration and Stability Analysis of Viscoelastic Rayleigh Beams Axially Moving on a Flexible Intermediate Support