ECM-inspired micro/nanofibers for modulating cell function and tissue generation

Yun Xu,Guodong Shi,Jincheng Tang,Ruoyu Cheng,Xiaofeng Shen,Yong Gu,Liang Wu,Kun Xi,Yihong Zhao,Wenguo Cui,Liang Chen

DOI: https://doi.org/10.1126/sciadv.abc2036

IF: 13.6

2020-11-27

Science Advances

Abstract:A ECM-inspired heterogeneous scaffold promoted dura mater healing and inhibited fibrosis via microstructural/biochemical cues.

multidisciplinary sciences

What problem does this paper attempt to address?

Engineering cartilage tissue based on cartilage-derived extracellular matrix cECM/PCL hybrid nanofibrous scaffold

Bei Feng,Tianji Ji,Xingang Wang,Wei Fu,Lincai Ye,Hao Zhang,Fen Li

DOI: https://doi.org/10.1016/j.matdes.2020.108773

IF: 9.417

2020-01-01

Materials & Design

Abstract:Extracellular matrix (ECM) derived from decellularized tissues and organs has been used as a biological scaffold in a variety of pre-clinical and clinical applications. However, the lack of mechanical properties and shape controllability is a drawback. In contrast, synthetic polymers can be easily engineered with good mechanical performance, but they have limited biological functionality. In this study, we explored a new method to electrospun cartilage-derived extracellular matrix (cECM) and polycaprolactone (PCL) composite nanofibrous membranes. The cartilage is a compact tissue for which electrospinning is difficult. To overcome this problem, the cartilage was sliced into pieces, milled into powders, and digested into a looser structure. The cECM/PCL (mass ratio 50:50) hybrid nanofibers appeared to be smooth, thinner, and uniform with enhanced mechanical properties and wettability compared to the electrospun PCL. Meanwhile, the presence of cECM in the cECM/PCL nanofibrous membranes significantly promoted chondrocyte proliferation in vitro and facilitated cartilage regeneration in vivo. All these results indicate that the cECM/PCL nanofibrous membranes fabricated with good mechanical properties and biocompatibility may represent a promising scaffold for cartilage regeneration. Moreover, this work may offer a convenient and cost-effective method to synthesize ECM-based hybrid nanofibrous scaffolds for other tissue applications.
Cellular Modulation by the Mechanical Cues from Biomaterials for Tissue Engineering.

Qiang Wei,Shenghao Wang,Feng Han,Huan Wang,Weidong Zhang,Qifan Yu,Changjiang Liu,Luguang Ding,Jiayuan Wang,Lili Yu,Caihong Zhu,Bin Li

DOI: https://doi.org/10.12336/biomatertransl.2021.04.001

2021-01-01

Abstract:Mechanical cues from the extracellular matrix (ECM) microenvironment are known to be significant in modulating the fate of stem cells to guide developmental processes and maintain bodily homeostasis. Tissue engineering has provided a promising approach to the repair or regeneration of damaged tissues. Scaffolds are fundamental in cell-based regenerative therapies. Developing artificial ECM that mimics the mechanical properties of native ECM would greatly help to guide cell functions and thus promote tissue regeneration. In this review, we introduce various mechanical cues provided by the ECM including elasticity, viscoelasticity, topography, and external stimuli, and their effects on cell behaviours. Meanwhile, we discuss the underlying principles and strategies to develop natural or synthetic biomaterials with different mechanical properties for cellular modulation, and explore the mechanism by which the mechanical cues from biomaterials regulate cell function toward tissue regeneration. We also discuss the challenges in multimodal mechanical modulation of cell behaviours and the interplay between mechanical cues and other microenvironmental factors.
Hierarchical Micro/Nanofibrous Bioscaffolds for Structural Tissue Regeneration

Yun Xu,Wenguo Cui,Yanxia Zhang,Pinghui Zhou,Yong Gu,Xiaofeng Shen,Bin Li,Liang Chen

DOI: https://doi.org/10.1002/adhm.201601457

2017-01-01

Abstract:Various biomimetic scaffolds with hierarchical micro/nanostructures are designed to closely mimic native extracellular matrix network and to guide cell behavior to promote structural tissue generation. However, it remains a challenge to fabricate hierarchical micro/nanoscaled fibrous scaffolds with different functional components that endow the scaffolds with both biochemical and physical features to exert different biological roles during the process of tissue healing. In this study, a biomimetic designed micro/nanoscaled scaffold with integrated hierarchical dual fibrillar components is fabricated in order to repair dura mater and prevent the formation of epidural scars via collagen molecule self-assembly, electrospinning, and biological interface crosslinking strategies. The fabricated biomimetic scaffolds display micro/nanofibers staggered hierarchical architecture with good mechanical properties and biocompatibility, and it has a more profound effect on attachment, proliferation, and differentiation of fibroblasts. Using a rabbit duraplasty model in vivo, the authors find that dural defects repaired with hierarchical micro/nanoscaled scaffold form a continuous neodura tissue similar to native dura mater; furthermore, the number of scar tissues decreases significantly in the laminectomy sites compared with conventional electrospun micro-fibrous scaffold. Taken together, these data suggest that the hierarchical micro/ nanoscaled fibrous scaffolds with dual fibrillar components may act as a "true" dural substitutes for dual repair.
Tailoring the multiscale mechanics of tunable decellularized extracellular matrix (dECM) for wound healing through immunomodulation

Pu Luo,Ruoxuan Huang,You Wu,Xingchen Liu,Zhengjie Shan,Li Gong,Shudan Deng,Haiwen Liu,Jinghan Fang,Shiyu Wu,Xiayi Wu,Quan Liu,Zetao Chen,Kelvin W.K. Yeung,Wei Qiao,Shoucheng Chen,Zhuofan Chen

DOI: https://doi.org/10.1016/j.bioactmat.2023.05.011

IF: 18.9

2023-05-19

Bioactive Materials

Abstract:Highlights • Cyclic freeze-thaw treatments altered the microstructure and mechanical properties of the dECM across multiple scales. • Enhanced dECM micromechanics significantly promoted M2 macrophage polarization via mechanotransduction pathways. • The immunomodulatory property of dECM with enhanced micromechanical property leads to a superior regenerative performance. • This mechanics-immunomodulation-based strategy offers new insights for for advanced tissue-regeneration biomaterials. With the discovery of the pivotal role of macrophages in tissue regeneration through shaping the tissue immune microenvironment, various immunomodulatory strategies have been proposed to modify traditional biomaterials. Decellularized extracellular matrix (dECM) has been extensively used in the clinical treatment of tissue injury due to its favorable biocompatibility and similarity to the native tissue environment. However, most reported decellularization protocols may cause damage to the native structure of dECM, which undermines its inherent advantages and potential clinical applications. Here, we introduce a mechanically tunable dECM prepared by optimizing the freeze-thaw cycles. We demonstrated that the alteration in micromechanical properties of dECM resulting from the cyclic freeze-thaw process contributes to distinct macrophage-mediated host immune responses to the materials, which are recently recognized to play a pivotal role in determining the outcome of tissue regeneration. Our sequencing data further revealed that the immunomodulatory effect of dECM was induced via the mechnotrasduction pathways in macrophages. Next, we tested the dECM in a rat skin injury model and found an enhanced micromechanical property of dECM achieved with three freeze-thaw cycles significantly promoted the M2 polarization of macrophages, leading to superior wound healing. These findings suggest that the immunomodulatory property of dECM can be efficiently manipulated by tailoring its inherent micromechanical properties during the decellularization process. Therefore, our mechanics-immunomodulation-based strategy provides new insights into the development of advanced biomaterials for wound healing. Graphical abstract Download : Download high-res image (411KB) Download : Download full-size image

engineering, biomedical,materials science, biomaterials
Coaxial nanofibrous scaffolds mimicking the extracellular matrix transition in the wound healing process promoting skin regeneration through enhancing immunomodulation

Luyao Sun,Jing Li,Wendong Gao,Miao Shi,Fengling Tang,Xiaoling Fu,Xiaofeng Chen

DOI: https://doi.org/10.1039/d0tb01933j

IF: 7.571

2021-01-01

Journal of Materials Chemistry B

Abstract:A degradable coaxial nanofibrous scaffold that mimics ECM transition in the wound healing process is designed to achieve better healing outcomes.

materials science, biomaterials
ECM-engineered Electrospun Fibers with an Immune Cascade Effect for Inhibiting Tissue Fibrosis.

Ming Qian,Shun Li,Kun Xi,Jincheng Tang,Xiaofeng Shen,Yong Liu,Ran Guo,Nannan Zhang,Yong Gu,Yun Xu,Wenguo Cui,Liang Chen

DOI: https://doi.org/10.1016/j.actbio.2023.08.058

IF: 10.633

2023-01-01

Acta Biomaterialia

Abstract:Tissue regeneration/fibrosis after injury is intricately regulated by the immune cascade reaction and extracellular matrix (ECM). Dysregulated cascade signal could jeopardize tissue homeostasis leading to fibrosis. Bioactive scaffolds mimicking natural ECM microstructure and chemistry could regulate the cascade reaction to achieve tissue regeneration. The current study constructed an ECM-engineered micro/nanofibrous scaffold using self-assembled nanofibrous collagen and decorin (DCN)-loaded microfibers to regulate the immune cascade reaction. The ECM-engineered scaffold promoted anti-inflammatory and pro-regenerative effects, M2 polarization of macrophages, by nanofibrous collagen. The ECM-engineered scaffold could release DCN to inhibit inflammation-associated fibrous angiogenesis. Yet, to prevent excessive M2 activity leading to tissue fibrosis, controlled release of DCN was expected to elicit M1 activity and achieve M1/M2 balance in the repair process. Regulated cascade reaction guided favorable crosstalk between macrophages, endothelial cells and fibroblasts by proximity. Additionally, decorin could also antagonize TGF-β1 via TGF-β/Smad3 pathway to suppress fibrotic activity of fibroblasts. Hence, ECM-engineered scaffolds could exert effective regulation of the immune cascade reaction by microstructure and DCN release and achieve the balance between tissue fibrosis and regeneration. STATEMENT OF SIGNIFICANCE: With the incidence of up to 74.6%, failed back surgery syndrome (FBSS) has been a lingering issue in spine surgery, which poses a heavy socio-economic burden to society. Epidural fibrosis is believed to be responsible for the onset of FBSS. Current biomaterial-based strategies treating epidural fibrosis mainly rely on physical barriers and unidirectional suppression of inflammation. Regulation of the immune cascade reaction for inhibiting fibrosis has not been widely studied. Based on the simultaneous regulation of M1/M2 polarization and intercellular crosstalk, the ECM-engineered micro/nanofibrous scaffolds constructed in the current study could exert an immune cascade effect to coordinate tissue regeneration and inhibit fibrosis. This finding makes a significant contribution in the development of a treatment for epidural fibrosis and FBSS.
Effects of the Biomimetic Microstructure in Electrospun Fiber Sutures and Mechanical Tension on Tissue Repair

Jie Dang,Shifen Huang,Shengmei Li,Jingyao Liu,Zibo Chen,Liu Wang,Jie Wang,Hao Chen,Shanshan Xu

DOI: https://doi.org/10.1021/acsami.4c01478

IF: 9.5

2024-05-25

ACS Applied Materials & Interfaces

Abstract:Electrospun microfibers, designed to emulate the extracellular matrix (ECM), play a crucial role in regulating the cellular microenvironment for tissue repair. Understanding their mechanical influence and inherent biological interactions at the ECM interface, however, remains a complex challenge. This study delves into the role of mechanical cues in tissue repair by fabricating Col/PLCL microfibers with varying chemical compositions and alignments that mimic the structure of the ECM....

materials science, multidisciplinary,nanoscience & nanotechnology
Artificial Extracellular Matrix Delivers TGFb1 Regulating Myofibroblast Differentiation

Weilu Cheng,Ruodan Xu,Dalong Li,Christian Bortolini,Jinmei He,Mingdong Dong,Flemming Besenbacher,Yudong Huang,Menglin Chen

DOI: https://doi.org/10.1039/c5ra26164c

IF: 4.036

2016-01-01

RSC Advances

Abstract:Spatiotemporally controlled release of transforming growth factor β1 from electrospun biomimetic nanofibers realized optimal cell viability and myofibroblast differentiation capacity, which holds great potential in wound healing application.
Novel Biomimetic Fiber Incorporated Scaffolds for Tissue Engineering

Fang Yongcong,Ting Zhang,Liliana Liverani,Aldo R. Boccaccini,Wei Sun

DOI: https://doi.org/10.1002/jbm.a.36773

2019-01-01

Journal of Biomedical Materials Research Part A

Abstract:From a structural perspective, an ideal scaffold ought to possess interconnected macro pores with sizes from 10 to 100 mu m to facilitate cell infiltration and tissue formation, as well as similar topography to the natural extracellular matrix (ECM) which would have an impact on cell behavior such as cell adhesion and gene expression. For that purpose, here we developed a fabrication process to incorporate electrospun short fibers within freeze-dried scaffolds for tissue engineering applications. Briefly, PCL short fibers were first produced from electrospun fibers with ultrasonication method. They were then evenly dispersed in gelatin solution and freeze-dried to obtain fiber incorporated scaffolds. The resulting scaffolds exhibited hierarchical structure including major pores with sizes ranging from 50 to 150 mu m and the short fibers dispersed in the thin walls of major pores, mimicking the fibrous feature of natural ECM. The short fibers were proven to modify the mechanical properties of scaffold and to facilitate cell adhesion and proliferation on the scaffold. As a promising scaffold for tissue engineering and regenerative medicine, the fiber incorporated scaffold may have further biomedical applications, in which the short fibers can act as drug release vehicles for growth factors or other biomolecules to promote vascularization.
In Vivo Engineered Extracellular Matrix Scaffolds with Instructive Niches for Oriented Tissue Regeneration

Meifeng Zhu,Wen Li,Xianhao Dong,Xingyu Yuan,Adam C. Midgley,Hong Chang,Yuhao Wang,Haoyu Wang,Kai Wang,Peter X. Ma,Hongjun Wang,Deling Kong

DOI: https://doi.org/10.1038/s41467-019-12545-3

IF: 16.6

2019-01-01

Nature Communications

Abstract:Implanted scaffolds with inductive niches can facilitate the recruitment and differentiation of host cells, thereby enhancing endogenous tissue regeneration. Extracellular matrix (ECM) scaffolds derived from cultured cells or natural tissues exhibit superior biocompatibility and trigger favourable immune responses. However, the lack of hierarchical porous structure fails to provide cells with guidance cues for directional migration and spatial organization, and consequently limit the morpho-functional integration for oriented tissues. Here, we engineer ECM scaffolds with parallel microchannels (ECM-C) by subcutaneous implantation of sacrificial templates, followed by template removal and decellularization. The advantages of such ECM-C scaffolds are evidenced by close regulation of in vitro cell activities, and enhanced cell infiltration and vascularization upon in vivo implantation. We demonstrate the versatility and flexibility of these scaffolds by regenerating vascularized and innervated neo-muscle, vascularized neo-nerve and pulsatile neo-artery with functional integration. This strategy has potential to yield inducible biomaterials with applications across tissue engineering and regenerative medicine.
Macromol. Biosci. 6/2012

chenghui sun,xiaobing jin,jeremy m holzwarth,xiaohua liu,jiang hu,melanie j gupte,yaoming zhao,peter x ma

DOI: https://doi.org/10.1002/mabi.201290019

2012-01-01

Macromolecular Bioscience

Abstract:Cover:. A scaffold that mimics the hierarchical features of the extracellular matrix may facilitate cell differentiation and anatomical tissue formation. A technique is developed in the present work to fabricate multi-channel nanofibrous polymer scaffolds, aiming to facilitate the regeneration of bundled and aligned tissues such as nerve and tendon. Further details can be found in the article by C. Sun, X. Jin, J. M. Holzwarth, X. Liu, J. Hu, M. J. Gupte, Y. Zhao, and P. X Ma* on page 761.
Microenvironment with NIR-Controlled ROS and Mechanical Tensions for Manipulating Cell Activities in Wound Healing

Rang Sun,Xinyu Jin,Yuying Bao,Zhanshuo Cao,Dong Gao,Ran Zhang,Liang Qiu,Hongbo Yuan,Chengfen Xing

DOI: https://doi.org/10.1021/acs.nanolett.4c00307

IF: 10.8

2024-03-02

Nano Letters

Abstract:The extracellular matrix (ECM) orchestrates cell behavior and tissue regeneration by modulating biochemical and mechanical signals. Manipulating cell-material interactions is crucial for leveraging biomaterials to regulate cell functions. Yet, integrating multiple cues in a single material remains a challenge. Here, near-infrared (NIR)-controlled multifunctional hydrogel platforms, named PIC/CM@NPs, are introduced to dictate fibroblast behavior during wound healing by tuning the matrix oxidative...

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Ultraporous nanofeatured PCL–PEO microfibrous scaffolds enhance cell infiltration, colonization and myofibroblastic differentiation

yanfang li,hans gregersen,jens vinge nygaard,weilu cheng,ying yu,yudong huang,mingdong dong,flemming besenbacher,menglin chen

DOI: https://doi.org/10.1039/c5nr04244e

IF: 6.7

2015-01-01

Nanoscale

Abstract:In the field of tissue engineering, integration of micro-porosity, nano-topogaphical features and weatt-ability into one three-dimensional (3D) scaffold remains a challenge. The extracellular matrix (ECM) mimicking feature of electrospun fibers endows them wide applications in tissue engineering. However, the tight-packing of electrospun submicron fibers hinder cell infiltration and further colonization. In this study, we fabricated hydrophilic, micro-porous scaffolds with nano-topographical cues by one-step electrospinning, and investigated NIH3T3 fibroblasts cell infiltration, colonization and myofibroblastic differentiation. The hierarchical porosity enhanced cell infiltration and proliferation significantly. Besides, the nano-topography influenced the cell actin distribution and cell morphology that stimulated myofibroblastic differentiation in a drastically different manner from that of traditional solid, smooth electrospun fibers, which may hold great potential in reconstructing tissues that require strong contractile forces.
Interpenetrated Nano- and Submicro-Fibrous Biomimetic Scaffolds Towards Enhanced Mechanical and Biological Performances.

Honglin Luo,Deqiang Gan,Miguel Gama,Junpin Tu,Fanglian Yao,Quanchao Zhang,Haiyong Ao,Zhiwei Yang,Junjie Li,Yizao Wan

DOI: https://doi.org/10.1016/j.msec.2019.110416

2019-01-01

Materials Science and Engineering C

Abstract:Developing fibrous scaffolds with hierarchical structures that closely mimic natural extracellular matrix (ECM) is highly desirable. However, fabricating scaffolds with true nanofibers (<100 nm) and submicrofibers (<1 μm) remains a big challenge. In this work, to mimic the fibrillar structure of natural ECM, bacterial cellulose (BC) nanofibers were hybridized with cellulose acetate (CA) submicrofibers for the first time. The interpenetrated nano-submicron fibrous BC/CA scaffold was fabricated using the combined electrospinning and modified in situ biosynthesis method. The BC/CA scaffold has an integrated symmetrical nanostructure in which BC nanofibers (42 nm in diameter) penetrate into the submicrofibrous CA (820 nm in diameter) scaffold. The BC/CA scaffold shows an interconnected porous structure with a high porosity of >90%. Additionally, the combination of CA submicrofibers with BC nanofibers leads to significantly improved mechanical properties over nanofibrous BC and submicrofibrous CA scaffolds and enlarged pores over nanofibrous BC scaffold. In addition, the biological behaviors of prepared BC/CA on MC3T3-E1 cells were investigated. Results suggested that BC/CA scaffold is beneficial for cell migration and proliferation. Moreover, the BC/CA scaffold shows higher alkaline phosphatase (ALP) activity, and calcium depositions. In addition, the hierarchical structures can effectively improve the expression of osteogenic gene (ALP mRNA and Runx2 mRNA) and protein (ALP). We believe that the methodology might provide biomimetic morphological microenvironments for enhanced tissue regeneration.
Multifaceted Tannin Crosslinked Bioinspired Decm Decorated Nanofibers Modulating Cell-Scaffold Biointerface for Tympanic Membrane Perforation Bioengineering

Zahid Hussain,Pi Ding,Liwei Zhang,Yajie Zhang,Salim Ullah,Yuanshan Liu,Ismat Ullah,Zhili Wang,Penghui Zheng,Renjun Pei

DOI: https://doi.org/10.1088/1748-605x/ac6125

IF: 4.103

2022-01-01

Biomedical Materials

Abstract:Tympanic membrane (TM) perforation leads to persistent otitis media, conductive deafness, and affects life quality. Ointment medication may not be sufficient to treat TM perforation (TMP) due to the lack of an underlying tissue matrix and thus requiring a scaffold-based application. The engineering of scaffold biointerface close to the matrix via tissue-specific decellularized extracellular matrix (dECM) is crucial in instructing cell behaviour and regulating cell-material interaction in the bioengineering domain. Herein, polycaprolactone (PCL) and TM-dECM (from Sprague-Dawley rats) were combined in a different ratio in nanofibrous form using an electrospinning process and crosslinked via tannic acid. The histological and biochemical assays demonstrated that chemical and enzymatic decellularization steps removed cellular/immunogenic contents while retaining collagen and glycosaminoglycan. The morphological, physicochemical, thermomechanical, contact angle, and surface chemical studies demonstrated that the tannin crosslinked PCL/dECM nanofibers fine-tune biophysical and biochemical properties. The multifaceted crosslinked nanofibers hold the tunable distribution of dECM moieties, assembled into a spool-shaped membrane, and could easily insert into perforated sites. The dECM decorated fibers provide a preferable biomimetic matrix for L929 fibroblast adhesion, proliferation, matrix adsorption, and f-actin saturation, which could be crucial for bioengineering. Overall, dECM patterning, surface hydrophilicity, interconnected microporosities, and multifaceted nanofibrous biosystem modulate cell-scaffold performance and could open opportunities to reconstruct TMP in a biomimetic fashion.
Engineered Living Oriented Electrospun Fibers Regulate Stem Cell Para‐Secretion and Differentiation to Promote Spinal Cord Repair

Jingzhi Xu,Kun Xi,Jincheng Tang,Juan Wang,Yunkai Tang,Liang Wu,Yichang Xu,Zonghan Xu,Liang Chen,Wenguo Cui,Yong Gu

DOI: https://doi.org/10.1002/adhm.202202785

IF: 10

2022-12-22

Advanced Healthcare Materials

Abstract:Living biomaterials directly couple with live cells to synthesize functional molecules and respond to dynamic environments, allowing the design, construction, and application of next generation composite materials. Improving the coordination and communication between artificial materials and living cells is essential. In this study, collagen self‐assembly and micro‐sol electrospinning techniques were used to prepare oriented living fiber bundles that can increase the transplantation rate of stem cells in the early stages of inflammation, indirectly enhancing the dynamic regulation of stem cells during inflammation. Additionally, brain‐derived neurotrophic factor (BDNF) contained in the fiber can improve the differentiation of bone marrow mesenchymal stem cells (BMSCs) into neurons once the inflammatory storm has subsided. The living oriented fiber bundles fully simulated the three‐dimensional structure of the central nervous system, activated integrin β1, promoted the growth and adhesion of stem cells in the acute stage of inflammation, upregulated anti‐inflammatory genes by more than 2‐fold via BMSCs in response to inflammation, and stably released BDNF for up to 4 weeks post‐inflammation storm subsidence. The BMSCs imitated endogenous stem cell neurogenic differentiation by enhancing the expression of neural‐related genes, such as Tuj‐1, and finally achieved functional neural recovery in the later stages (4w/8w) of spinal cord injury. This article is protected by copyright. All rights reserved

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
Micro-and-nanometer Topological Gradient of Block Copolymer Fibrous Scaffolds Towards Region-Specific Cell Regulation

Lei Chen,Qianqian Yu,Yifan Jia,Mengmeng Xu,Yingying Wang,Jing Wang,Tao Wen,Linge Wang

DOI: https://doi.org/10.1016/j.jcis.2021.08.021

IF: 9.9

2021-01-01

Journal of Colloid and Interface Science

Abstract:Regulating cell behavior and function by surface topography has drawn significant attention in tissue engineering. Herein, a gradient fibrous scaffold comprising anisotropic aligned fibers and isotropic annealed fibers was developed to provide a controllable direction of cell migration, adhesion, and spreading. The electrospun aligned fibers were engraved to create surface gradients with micro-and-nanometer roughness through block copolymer (BCP) self-assembly induced by selective solvent vapor annealing (SVA). The distinct manipulation of cell behavior by annealed fibrous scaffolds with tailored self-assembled nanostructure and welded fibrous microstructure has been illustrated by in situ/ex situ small angle X-ray scattering (SAXS), scanning electron microscopy (SEM), atomic force microscopy (AFM) and in vitro cell culture. Further insights into the effect of integrated gradient fibrous scaffold were gained at the level of protein expression. From the perspective of gradient topology, this region-specific scaffold based on BCP fibers shows the prospect of guiding cell migration, adhesion and spreading and provides a generic method for designing biomaterials for tissue-engineering.
Electroactive electrospun nanofibers for tissue engineering

Xiaodi Zhang,Longfei Li,Jiang Ouyang,Liqun Zhang,Jiajia Xue,Han Zhang,Wei Tao

DOI: https://doi.org/10.1016/j.nantod.2021.101196

IF: 17.4

2021-08-01

Nano Today

Abstract:The ability of electrospun nanofibers to mimic the structure and composition of certain components of the extracellular matrix (ECM) has been widely used in the construction of tissue regeneration scaffolds. As the biophysical cues of the ECM, bioelectric communication mediated by endogenous electrical fields and currents also plays an important role in the repair and regeneration of defected tissues. To this end, it is compelling to develop electroactive electrospun nanofibers for tissue engineering. Here, we briefly summarize the commonly developed electroactive electrospun nanofibers and their progress in tissue engineering, especially for heart repair, nerve injury treatment, wound healing, skeletal muscle and bone regeneration. We also discuss their potential applications as biosensors and drug delivery platforms. Afterwards, we specifically focus on the future direction of the design and functionalization of electroactive electrospun nanofibers for tissue engineering. At last, we propose several promising strategies to make the scaffolds more intelligent, portable, monitorable, and safe.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Cobweb‐Inspired Micro/Nanostructured Scaffolds for Soft Tissue Regeneration with Inhibition Effect of Fibrosis under Dynamic Environment

Yongjie Jiao,Xiaojing Li,Xingxing Liu,Chaojing Li,Xiao Yang,Xuwei Sun,Fujun Wang,Lu Wang

DOI: https://doi.org/10.1002/adhm.202300997

IF: 10

2023-09-17

Advanced Healthcare Materials

Abstract:Excessive mechanical stimulation induces fibroblast‐to‐myofibroblast differentiation and fibrosis. Inspired by the cobweb, a scaffold consisting of nanofibers and micron‐scale beads is constructed to inhibit mechanical stimulation under a dynamic environment by scaffold deformation. Nano‐protrusions are combined to inhibit fibrosis under a static environment. As a result, fibrosis is regulated by the fiber structure and surface topology. In soft tissue repair, fibrosis can lead to repair failure and long‐term chronic pain in patients. Excessive mechanical stimulation of fibroblasts is one of the causes of fibrosis during abdominal wall regeneration. Inspired by the cobweb, a polycaprolactone beaded fiber is prepared by electrospinning. The cobweb‐inspired structure attenuates the mechanical stimulation of cells under a dynamic environment. Nano‐protrusions are introduced into the scaffold for further inhibition of fibrosis by self‐induced crystallization. A machine is built for in vitro dynamic culture and rat abdominal subcutaneous embedding experiments are performed to verify the inhibiting effect of fibrosis in a dynamic environment in vivo. Results show that the expression of integrin β1 and α‐smooth muscle actin is inhibited by the cobweb‐inspired structure under dynamic culture. The results of hematoxylin and eosin and Masson's trichrome indicate that the cobweb‐inspired structure has a good inhibitory effect on fibrosis in a dynamic environment in vivo. In general, the cobweb‐inspired scaffold with nano‐protrusions has a good ability to inhibit fibrosis under both static and dynamic environments. It is believed that the scaffold has promising applications in the field of inhibiting fibrosis caused by mechanical stimulation.

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
Co-electrospun Nano-/Microfibrous Composite Scaffolds with Structural and Chemical Gradients for Bone Tissue Engineering.

Jingjing Luo,Jiang Zhu,Lijun Wang,Jing Kang,Xin Wang,Jie Xiong

DOI: https://doi.org/10.1016/j.msec.2020.111622

2020-01-01

Materials Science and Engineering C

Abstract:Recent trends in scaffold design for tissue engineering have focused on providing structural, mechanical and chemical cues for guiding cell behaviors. In this study, we presented a structural/compositional gradient nano-/microfibrous mesh by co-electrospinning, using silk fibroin-poly(ε-caprolactone) (SF-PCL) nanofibers and PCL microfibers. The pore size, porosity, and physical property of the gradient meshes were qualified. Cell proliferation of mouse osteoblast-like MC3T3-E1 cells was carried out to estimate the effect of structural and compositional gradients on biocompatibility. Furthermore, the 2-D mesh was rolled up and the compressive property of 3-D cylinder was investigated. The results suggested that the rolled-up gradient cylinder scaffold exhibited higher osteogenic differentiation compared to the pristine nanofibrous cylinder sample. By incorporating Chinese medicine ginsenoside Rg1, sustained release was achieved in composite meshes. Rg1-containing nanofibrous meshes and Rg1 gradient cylinders enhanced the cell proliferation of human umbilical vein endothelial cells (HUVECs). The developed fibrous scaffold may provide structural, compositional, and chemical gradients for bone regeneration. BRIEFS: Structural and chemical gradient fibrous scaffold fabricated by co-electrospinning.

ECM-inspired micro/nanofibers for modulating cell function and tissue generation

Engineering cartilage tissue based on cartilage-derived extracellular matrix cECM/PCL hybrid nanofibrous scaffold

Cellular Modulation by the Mechanical Cues from Biomaterials for Tissue Engineering.

Hierarchical Micro/Nanofibrous Bioscaffolds for Structural Tissue Regeneration

Tailoring the multiscale mechanics of tunable decellularized extracellular matrix (dECM) for wound healing through immunomodulation

Coaxial nanofibrous scaffolds mimicking the extracellular matrix transition in the wound healing process promoting skin regeneration through enhancing immunomodulation

ECM-engineered Electrospun Fibers with an Immune Cascade Effect for Inhibiting Tissue Fibrosis.

Effects of the Biomimetic Microstructure in Electrospun Fiber Sutures and Mechanical Tension on Tissue Repair

Artificial Extracellular Matrix Delivers TGFb1 Regulating Myofibroblast Differentiation

Novel Biomimetic Fiber Incorporated Scaffolds for Tissue Engineering

In Vivo Engineered Extracellular Matrix Scaffolds with Instructive Niches for Oriented Tissue Regeneration

Macromol. Biosci. 6/2012

Microenvironment with NIR-Controlled ROS and Mechanical Tensions for Manipulating Cell Activities in Wound Healing

Ultraporous nanofeatured PCL–PEO microfibrous scaffolds enhance cell infiltration, colonization and myofibroblastic differentiation

Interpenetrated Nano- and Submicro-Fibrous Biomimetic Scaffolds Towards Enhanced Mechanical and Biological Performances.

Multifaceted Tannin Crosslinked Bioinspired Decm Decorated Nanofibers Modulating Cell-Scaffold Biointerface for Tympanic Membrane Perforation Bioengineering

Engineered Living Oriented Electrospun Fibers Regulate Stem Cell Para‐Secretion and Differentiation to Promote Spinal Cord Repair

Micro-and-nanometer Topological Gradient of Block Copolymer Fibrous Scaffolds Towards Region-Specific Cell Regulation

Electroactive electrospun nanofibers for tissue engineering

Cobweb‐Inspired Micro/Nanostructured Scaffolds for Soft Tissue Regeneration with Inhibition Effect of Fibrosis under Dynamic Environment

Co-electrospun Nano-/Microfibrous Composite Scaffolds with Structural and Chemical Gradients for Bone Tissue Engineering.