Crystal Structure Of Human Spermidine/Spermine N'-Acetyltransferase (Hssat): The First Structure Of A New Sequence Family Of Transferase Homologous Superfamily
Yong-Qun Zhu,De-Yu Zhu,Lei Yin,Ying Zhang,Clemens Vonrhein,Da-Cheng Wang
DOI: https://doi.org/10.1002/prot.20965
2006-01-01
Abstract:Polyamines including putrescine, spermidine, and spermine are important polycationic small molecules for life. They are involved in protein synthesis, cell growth, and regulation of several metabolic processes in a cell.1 Overaccumulation of the polyamines is toxic to cells. The intracellular concentration of polyamines is carefully controlled by a combination of regulated enzymatic steps, including biosynthetic enzymes such as ornithine decarboxylase, and catabolic enzymes such as spermidine/spermine N1-acetyltransferase (SSAT).2, 3 SSAT is one of the diamine N-acetyltransferases and a rate-limiting enzyme, which has a key role in polyamine metabolism. It catalyzes the N1-acetylation of spermine and spermidine to form less charged derivatives that are either excreted from the cell or undergo further metabolism. It is the turning point of the polyamine metabolism pathway.4 So far 11 proteins have been identified as belonging to the SSAT homologous family, as shown in Figure 1. Although the function of SSAT is important, the three-dimensional structure as well as the mechanism of enzyme reaction and actual activity site of SSAT are still unknown. Secondary structure of hSSAT and sequence alignment between SSAT proteins and Hpa2. SSAT = spermidine/spermine N1-acetyltransferase. Hpa2 is the histone acetyltransferase from yeast. The secondary-structure elements (β-sheet, α-helix) found in hSSAT are shown above the sequence. The identical and homologous residues are shaded in dark gray and light gray, respectively. The consensus sequence for the acetyl CoA binding site is highlighted by box. Eleven aligned SSAT homologous proteins were obtained from UniProt.21 The sequence alignment was performed with ClustalW22 and the figure was prepared with ALSCRIPT.23 Human SSAT (hSSAT), containing 171 residues, is related with many serious diseases, such as human colon cancer and infection of human immunodeficiency virus-1.5, 6 Herein, we report the crystal structure of hSSAT, which is the first structure of diamine N-acetyltransferases. The fold of hSSAT belongs to the transferase homologous superfamily. The comparisons of sequence and structure show that the hSSAT structure is the representative of a new sequence family of transferase superfamily. Three-dimensional structure also suggests the potential enzyme activity site of hSSAT. Polymerase chain reaction primers, including NdeI and XhoI restriction sites, were designed to amplify the hSSAT gene (GenBank: NP_002961) from reverse transcriptase-polymerase chain reaction products of human hemopoietic stem cell. The gene was inserted into the pET22b(+) vector (Novagen), and the recombinant protein was overexpressed as a C-terminal His-tagged protein in Escherichia coli BL21(DE3). The cells were grown in LB at 37°C and induced with 1 mM IPTG when the culture reached an O.D600 of 0.6–0.8. The harvested cells were resuspended in the lysis buffer (50 mM NaH2PO4, pH8.0; 300 mM NaCl; 10 mM imidazole) with 0.1 mM PMSF and sonicated. The lysate was centrifuged at 15,000 revolutions per minute (rpm) at 4°C for 20 min. The supernatant was loaded directly into a Ni-NTA column (Novagen) preequilibrated with lysis buffer. Then the column was washed with wash buffer (50 mM NaH2PO4, pH8.0; 300 mM NaCl; 20 mM imidazole) and the target protein was eluted with elution buffer (50 mM NaH2PO4, pH 8.0; 300 mM NaCl; 250 mM imidazole). The eluate was concentrated by ultrafiltration (Millipore) and then loaded into a Superdex75 HR16/60 column (Amersham Pharmacia) preequilibrated with buffer of 20 mM Tris-HCl pH 8.0 at 16°C. Further purification was performed with a global Mono Q HR5/5 (Amersham Pharmacia). Finally, hSSAT was desalted with the buffer of 20 mM Tris-HCl pH 8.0. The purified protein was analyzed using sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified protein was concentrated to 50 mg/mL for crystallization. Crystallization experiments were performed with the hanging-drop vapor-diffusion method combined with micro-seeding at 20°C. The diffusion drops were formed with 1 μL of protein solution and 1 μL of reservoir solution and seeded immediately. Then the drops were equilibrated against 0.5 mL of reservoir solution containing 2.6 M NaCl, 0.1 M Tris-HCl pH 8.0, and 0.1 M potassium sodium tartrate. The qualified crystals suitable for X-ray diffraction were obtained after one night. All diffraction data were collected on a Rigaku FRE diffraction system using a Rigaku R-Axis IV++ image plate detector. For preparation of the iodine-derivative crystals, quick-soaking method was used. The crystal was soaked in the heavy-atom soaking solution (2.6 M NaCl, 0.1 M Tris-HCl, 0.1 M potassium sodium tartrate and 0.5 M KI) for 30 s before mounting the crystal. Native crystal was soaked the same way using native-soak solution (2.6 M NaCl, 0.1 M Tris-HCl pH 8.0, and 0.1 M potassium sodium tartrate) to maintain the same isomorph. Then the crystals were flash-cooled in the nitrogen-gas stream at 95 K. Two sets of data were collected with the crystal-to-detector distance of 220 mm and exposed for 3 min with 1° oscillation per frame. The iodine-derivative data were collected to 360 frames and native data to 107 frames. MOSFLM, SCALA, and TRUNCATE from the CCP4 program suite7 were used for processing, reduction, and scaling of the diffraction data. Data statistics are summarized in Table I. The structure of hSSAT was successfully determined through the iodine short-cryo soaking approach.8 The program SHELXD was used to search initial iodine atom sites. The iodine atom sites were detected again and refined by SHARP9 using isomorphous and anomalous signals. There are 22 iodine sites found in an asymmetric unit. After initial phasing by SHARP and density modification by SOLOMON, further density modification was performed with DM10 (average) from the CCP4 program suit7 to refine the phase. The initial model consisting of 70% of the hSSAT structure was built automatically by using ARP/wARP.7, 11 The remainder of the model was manually built using O.12 The structure was refined to the resolution of 2.3 Å with CNS version 1.1.13 The final model was built up with R-factor of 0.201 and Rfree of 0.269. The quality of the structure was checked using PROCHECK.14 The statistics are listed in Table I. The final structure model of hSSAT contains two protein molecules (residues 3–169 for chain A, residues 3–170 for chain B) and 359 water molecules. The whole hSSAT sequence has 171 residues. Because of lack of electron density, seven residues at N- and C-terminal, including A1, A2, A170, A171, and B1, B2, B171, are missed. The His-tag at C-terminal also does not appear in the electron density map. Two residues (Glu-B48 and Glu-B67) are in disallowed regions of the Ramachandran plot, which are well defined by the clear density maps. At the moment, there is no special reason to be found for these strained conformations. There are two hSSAT molecules related by a noncrystallographic twofold axis in the asymmetric unit, which are integrated into a stable dimer via a unique way [Fig. 2(a)]. The tertiary structure of the hSSAT monomeric partner adopts a compact α/β fold mode, which consists of seven β-strands which consists of seven β-strands (β1–β7) connected by six α-helices (α1–α2, α4–α7) and a 310 helix (α3) [Fig. 2(b)]. The core structure of monomer contains a central five-stranded antiparallel β-sheet (β1–β5) and four helices (α1–α4). The helices of α1 and α2 connect strands β1 and β2 and are located on the convex face of this five-stranded antiparallel β-sheet, whereas the helices of α3 and α4, which connect strands β4 and β5, are located on the concave face. It is interesting that the remaining structural elements at the C-terminal, including α5, β6, α6, β7, and α7, are rather separately arranged out of the core structure to form a long tail of the tertiary structure [Fig. 2(b)]. Evidently, this separated C-terminal segment needs to be stabilized by special structural factors. Actually, this special structural requirement is notably satisfied by the dimerization of two hSSAT molecules. In the dimeric form of hSSAT, the long β-strand at C-terminal, β7 of one molecule, is subtly inserted into the space between β5 and β6 of the partner molecule to form a heterogeneous three-stranded antiparallel β-sheet through 11 pairs of intermolecular main-chain hydrogen bonds (eight between residues 123–131 of Mol A and residues 153–161 of Mol B and three between residues 146–149 of Mol A and residues 158–156 of Mol B) [Fig. 2(c)]. This heterogeneous three-stranded β-sheet is further combined with β1–β4 to construct an integrated seven-stranded antiparallel β-sheet as a more stable molecular scaffold for hSSAT monomer. By accompanying, the C-terminal helix α7 of one molecule is also moved and stabilized by interacting with helix α4 of the partner molecule [Fig. 2(c)]. We refer to this unique way for the dimerization of hSSAT as C-terminal exchange. Through C-terminal exchange, two hSSAT molecules are firmly assembled to an intact dimer, which is the main structural character of hSSAT. It implies that the dimeric form of hSSAT is its basic structural and functional unit. In fact, our experiment data showed that hSSAT is really a dimer in solution (data not shown here). a: Ribbon diagram of hSSAT dimer. Ribbons are colored in orchid and green for molecule A and B, respectively. Two molecules are related by a noncrystallographic twofold axis. b: Diagram of hSSAT monomer structure. β1–β5 and α1–α4 as the core structure are shown in green. The separated C-tail of the molecule consisting of β6–β7 and α5–α7 is shown in red. The β7-strand from the opposite molecule will be inserted into the space between β5 and β6 in dimeric form. c: C-terminal exchange and interaction segments in hSSAT dimer. α4–α7 and β5–β7 are from molecule A (orchid). α4′–α7′ and β5′–β7′ are from opposite molecule B (green). In dimerization, the strand β7 at the C-terminal of A is inserted into the space between β5′ and β6′ of B to form a heterogeneous three-stranded β-sheet, which will further contact the sheet of β1′–β4′ to build up a more stable molecular scaffold (shown in a and b). By accompanying, the C-terminal helix α7 of molecule A is moved to contact with α4′ of molecule B. The figures were prepared using Molscript.24 The structure similarity search with Dali revealed that the core fold of hSSAT, consisting of six strands with four surrounding α-helices, is generally consistent with the typical transferase fold in CATH,15, 16 in which the protein domain structures are hierarchically classified. Through analysis with the combinatorial extension (CE),17 all of the structures similar to hSSAT belong to the transferase family. So it strongly identified that hSSAT belongs to the transferase homologous superfamily (CATH code: 3.40.630.30). So far, there are 22 sequence families found in the transferase homologous superfamily. The PSI-BLAST18 result indicates that there is no obvious sequence similarity between hSSAT and all other structures of the transferase homologous family. Further sequence comparison was performed with SSAP.19 It indicates that hSSAT has less than 20% sequence identity to each representative member of 22 sequence families. According to CATH criteria of S-level classification, hSSAT should be assigned to a new sequence family of the transferase homologous superfamily. The structural comparisons showed that the closest structural homolog of hSSAT was the histone acetyltransferase Hpa220 from yeast (Hpa2, PDB ID 1QSM; SSAP score, 85.03%, overlap, 88%; root-mean-square deviation, 2.47 Å for equivalent 147 aligned residues). However, there is only 16% sequence identity between hSSAT and Hpa2. The main structure difference between these two structures is located at the C-terminal segment where hSSAT has an additional α helix (α7). Hpa2 is a member of the Gcn5-related N-acetyltransferase (GNAT) family. It has a conserved acetyl CoA binding site, which is characterized with the sequence of RXXGXG (X can be any amino acid residue).20 This characterized sequence is also conserved in 11 proteins of the SSAT family (residues 101–106 with sequence RGFGIG) (Fig. 1). The structural comparison between hSSAT and Hpa2-acetyl CoA complex showed that hSSAT has a similar tertiary structure at this acetyl CoA binding site. It indicates that hSSAT should adopt a similar acetyl CoA binding site and activity site as Hpa2. The hSSAT is the first structure of diamine N-acetyltransferases and the SSAT homologous family. So far, the detailed mechanism of bioactivity of hSSAT is still in question. The tertiary structure of hSSAT reported in this article provides a sound basis for the in-depth study of its structure–function relationship. Coordinates and structure factors for the structure of hSSAT have been deposited at the Protein Data Bank with accession code 2F5I. The X-ray data collection was supported by the Photon Factory at KEK (20005G253), Japan. The authors thank Yi Han of the protein platform of Institute of Biophysics for providing the X-ray facility in house for crystallographic analysis and data collection.