Abstract:Organic rankine cycle (ORC) has been regarded as the most promising measure for converting low-grade waste heat into electricity during the past decades. To take better advantage of ORC, the parameters of ORC and its heat integration with the background process streams should be optimized simultaneously. In this work, the decision variables of ORC not only include the operating temperature, pressure, and flowrate but also contain the type of working fluids. A set of 43 pure fluids and 36 binary mixtures are adopted from the literature as candidates for working fluids. In addition, both the supercritical and subcritical conditions of ORCs are involved. Background process streams and ORC streams with variable temperatures and flowrates are synthesized for heat integration. Such a complicated heat integration problem cannot be solved by traditional methods, where the temperature and flowrates of streams are fixed. We develop a two-level optimization strategy. The outer level identifies the promising working fluids and their compositions, temperatures, and pressures inside the ORC. The inner level deals with the heat integration problem, where the temperatures and flowrates of streams are the variables. The flowrate of ORC, the utility consumption, as well as area of heat exchangers are optimized in the inner level based on the vertical heat transfer assumption of pinch technology. The outer level is solved by a genetic algorithm, while the inner level is solved by a deterministic algorithm. Case studies show that the inner level model for heat integration is superior in both efficiency and quality of the solution. We also provide an overview of the best ORC selection for a single waste heat source between 100 and 300 degrees C and show applicability for the integration of ORC and background processes with multiple streams in case studies.

A Comprehensive Study of a Low-Grade Heat-Driven Cooling and Power System Based on Heat Current Method

Simultaneous Optimization for Organic Rankine Cycle Design and Heat Integration

Simultaneous Optimization of a Heat Exchanger Network and Operating Conditions of Organic Rankine Cycle

Working Fluid Selection for a Small-Scale Organic Rankine Cycle Recovering Engine Waste Heat

Analysis of a 1 Kw Organic Rankine Cycle Using a Scroll Expander for Engine Coolant and Exhaust Heat Recovery

Optimization of Organic Rankine Cycle Involving Operating Conditions and Work Fluids and Heat Integration

Multi-objective Optimization of a Combined Cooling, Heating, and Power System with Subcooled Compressed Air Energy Storage Considering Off-Design Characteristics

Thermodynamic analysis and optimization of a combined cooling and power system using ocean thermal energy and solar energy

Theoretical analysis of a direct-coupled Stirling combined cooling and power system for heat recovery

Dynamic performance of a multi-mode operation CO2-based system combining cooling and power generation

Heat Current Method for Analysis and Optimization of Heat Recovery-Based Power Generation Systems

Performance Study on a Low-Temperature Absorption–compression Cascade Refrigeration System Driven by Low-Grade Heat

Combined cooling and power cycle for engine waste heat recovery using CO2-based mixtures

Optimization and comparative analysis of various organic Rankine cycle-based integrated systems for cooling and power cogeneration utilizing waste heat

Control strategy for a CO2-based combined cooling and power generation system based on heat source and cold sink fluctuations

Multi-objective optimization of heat exchange network and thermodynamic cycles integrated system for cooling and power cogeneration

Analysis of a novel combined cooling and power system by integrating of supercritical CO2 Brayton cycle and transcritical ejector refrigeration cycle

Parametric study and multi-objective optimization of a combined cooling, desalination and power system

Heat Current Method for Integrated Analysis and Optimization of Thermodynamic Systems

Numerical Study and Optimization of a Combined Thermoelectric Assisted Indirect Evaporative Cooling System

Dynamic analysis and operation simulation for a combined cooling heating and power system driven by geothermal energy