Abstract:Brittleness and high water sensitivity have so far hindered the utilization of cellulose nanofibril (CNF) films in many applications. In this study, strong, ductile, transparent, and water-resistant CNF-based composite films were prepared by incorporating UV-curable glycerol dimethacrylate (GDMA) and poly(ethylene oxide) (PEO) into CNFs. Fourier transform infrared spectroscopy and other test results confirmed the cross-linking between PEO chains, inter-cross-linking between PEO and GDMA, as well as self-polymerization of GDMA after UV irradiation. These reactions had a synergistic effect on the mechanical properties and water resistance of the films, leading to outstanding mechanical properties of the films in both wet and dry states. Specifically, an optimal formulation, CNF/15%GDMA/50%PEO, showed a tensile strength, modulus, and toughness at the wet state of 42.1 MPa, 0.3 GPa, and 3.7 MJ/m3, about 6.6, 4.3, and 11.1 times those of the neat CNF film, respectively. This ternary composite film also exhibited a higher transparency than the neat CNF film with an optical transmittance of ∼84.0% at 550 nm wavelength. The film could be pressed into a double-curved structure without a fracture with moisture plasticization, demonstrating its high ductility and formability. These properties indicate that the new CNF-based composite films can be promising alternatives to petroleum-based materials for packaging, flexible electronics, and many other applications that require material strength, toughness, and water resistance at the same time.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c01222.Materials and methods; tables of formulations of film samples; thermal properties of PEO and PEO/GDMA films before and after UV irradiation derived from DSC data in Figure 1b; tensile properties of the films derived from the stress–strain curves in Figures 3 and 4; optical properties of the films; and water contact angle results of the films (PDF)This article has not yet been cited by other publications.

Synchronously improved energy storage density and water resistance of cellulose/MXene composite film via glutaraldehyde-assisted crosslinking

Constructing a "Micro-Nano Collaboration" Network Via Disk-Milling: Value-enhanced Utilization of Flexible Temperature-Resistant Cellulose Insulation Films.

Enhanced Dielectric Properties of All-Cellulose Composite Film via Modulating Hydroxymethyl Conformation and Hydrogen Bonding Network

Synchronously Enhanced Breakdown Strength and Energy Storage Ability of Cellulose Acetate Flexible Films Via Introducing Ultra-Low Content of Carbonized Polymer Dots

High-performance dielectric film capacitors based on cellulose/Al2O3 nanosheets/PVDF composites

Utilizing the synergistic effect between Schottky barrier and field redistribution to achieve high-density, low-consumption cellulose-based flexible dielectric films——for next-generation green energy storage capacitors

Dielectric Behaviour of Montmorillonite/cyanoethylated Cellulose Nanocomposites.

Crosslinking Modification and Hydrogen Bonding Synergy to Achieve High Breakdown Strength and Energy Density of PMMA-co-GMA/PVDF Dielectric Composite Films

Regenerated Cellulose/NaNbO 3 Nanowire Dielectric Composite Films with Superior Discharge Energy Density and Efficiency

Achieving Higher Dielectric and Energy Storage Performances of Methyl Methacrylate-co-glycidyl Methacrylate Films Through the Nanocomposite Strategy

All-organic PVDF-based Composite Films with High Energy Density and Efficiency Synergistically Tailored by MMA-co-GMA Copolymer and Cyanoethylated Cellulose.

All-organic PVDF-based Composite films with High Energy Density and Efficiency synergistically tailored by MMA-co-GMA and cyanoethylated cellulose

A cellulose-based light-management film incorporated with benzoxazine resin/tannic acid exhibiting UV/blue light double blocking and enhanced mechanical property

Polymethyl Methacrylate Substrate-Inducing Highly Ordered Regenerated Cellulose Films Toward Ultra-High Breakdown Strength and Charge–Discharge Efficiency

Highly Transparent PVDF Films with Enhanced Dielectric and Energy Storage Properties Tailored by a PMMA-co-GMA Copolymer

Structure and transition behavior of crosslinked poly(2-(2-methoxyethoxy) ethylmethacrylate- co -(ethyleneglycol) methacrylate) gel film on cellulosic-based flat substrate

Enhanced high permittivity and lowed dielectric loss in cellulose-fiber framework polymer microcomposites

Strong, Ductile, Transparent, Water-Resistant Cellulose Nanofibril Composite Films via UV-Induced Inter-Cross-Linked Networks

Flexible Cellulose Nanofibers/mxene Composite Films for UV-shielding Packaging

Multifunctional wood-derived cellulose/Ti 3 C 2 T x composite films enhanced by densification strategy for electromagnetic shielding, Joule/solar heating, and thermal camouflage

Enhanced Energy Density in Cellulose Doped Polyimide-based All Organic Composites for High Temperature Capacitor Applications