Modeling of Polyhydroxyalkanoate Synthesis from Biogas by Methylocystis Hirsuta
Xueming Chen,Yadira Rodriguez,Juan C. Lopez,Raul Munoz,Bing-Jie Ni,Gurkan Sin
DOI: https://doi.org/10.1021/acssuschemeng.9b07414
IF: 8.4
2020-01-01
ACS Sustainable Chemistry & Engineering
Abstract:Methylocystis hirsuta, a type II methanotroph, has been experimentally demonstrated to be able to efficiently synthesize polyhydroxy-alkanoates (PHA) from biogas under nutrient-limited conditions. A mechanistic model capable of describing the relevant processes of M. hirsuta, which is currently not available, would therefore lay a solid foundation for future practical demonstration and optimization of the PHA synthesis technology using biogas. To this end, dedicated batch tests were designed and conducted to obtain experimental data for different mechanistic processes of M. hirsuta. Through utilizing the experimental data of well-designed batch tests and following a step-wise model calibration/validation protocol, the stoichiometrics and kinetics of M. hirsuta are reported for the first time, including the yields of growth and PHA synthesis on CH4 (0.14 +/- 0.01 g COD g(-1) COD and 0.25 +/- 0.02 g COD g(-1) COD), the CH4 and O-2 affinity constants (5.1 +/- 2.1 g COD m(-3) and 4.1 +/- 1.7 g O-2 m(-3)), the maximum PHA consumption rate (0.019 +/- 0.001 g COD g(-1) COD d(-1)), and the maximum PHA synthesis rate on CH4 (0.39 +/- 0.05 g COD g(-1) COD d(-1)). Through applying the developed model, an optimal O-2:CH4 molar ratio of 1.6 mol O-2 mol(-1) CH4 was found to maximize the PHA synthesis by M. hirsuta. Practically, the model and parameters obtained would not only benefit the design and operation of bioreactors performing PHA synthesis from biogas, but also enable specific research on selection for type II methanotrophs in diverse environments.