Abstract:Because of their high molecular heat conductivity, low-Prandtl number liquid metal is a promising candidate coolant for various designs of advanced nuclear systems such as liquid metal–cooled fast reactors and accelerator-driven sub-critical system (ADS). With the fast-growing computational capacity, more and more attention has been paid to applying computational fluid dynamics (CFD) methods in thermal design and safety assessment of such systems for a detailed analysis of three-dimensional thermal–hydraulic behaviors. However, numerical modeling of turbulent heat transfer for low-Prandtl number liquid metal remains a challenging task. Numerical approaches such as wall-resolved large eddy simulation (LES) or direct numerical simulation (DNS), which can provide detailed insight into the physics of the liquid metal flow and the associated heat transfer, were widely applied to investigate the turbulent heat transfer phenomenon. However, these approaches suffer from the enormous computational consumption and are hence limited only to simple geometrical configurations with low to moderate Reynolds numbers. The Reynolds-averaged Navier–Stokes (RANS) approach associated with a turbulent Prandtl number Prt accounting for the turbulent heat flux based on Reynolds analogy is still, at least in the current state in most of the circumstances, the only feasible approach for practical engineering applications. However, the conventional choice of Prt in the order of 0.9∼unity in many commercial computational fluid dynamics codes is not valid for the low-Prandtl number liquid metal. In this study, LES/DNS simulation results of a simple forced turbulent channel flow up to a friction Reynolds number Reτ of 2000 at Pr of 0.01 and 0.025 were used as references, to which the Reynolds-averaged Navier–Stokes approach with varying Prt was compared. It was found that the appropriate Prt for the RANS approach decreases with bulk Peclet number Peb and approaches a constant value of 1.5 when Peb becomes larger than 2000. Based on this calibrated relation with Peb , a new model for Prt used in the RANS approach was proposed. Validation of the proposed model was carried out with available LES/DNS results on the local temperature profile in the concentric annulus and bare rod bundle, as well as with experimental correlations on the Nusselt number in a circular tube and bare rod bundle.

Universal thermal profiles with polynomial thermal diffusivity in a channel flow

Equivalence of Three Thermal Boundary Conditions in Compressible Turbulent Channel Flows

Predicting Mean Profiles in Compressible Turbulent Channel and Pipe Flows

High-Pr Heat Transfer in Viscoelastic Drag-Reducing Turbulent Channel Flow

Mean temperature profiles in turbulent internal flows

Numerical Analysis of Mixed Convective Heat Transfer In a Square Channel with Uniform Wall Temperature.

A Comprehensive Evaluation of Turbulence Models for Predicting Heat Transfer in Turbulent Channel Flow across Various Prandtl Number Regimes

Friction and heat transfer in forced air convection with variable physical properties

Heat transfer in drop-laden turbulence

Numerical simulation of a low Prandtl number flow with a four-parameters turbulence model through an explicit algebraic definition of Reynolds stress and turbulent heat flux

Numerical Assessment of the Thermal Performance of Microchannels with Slip and Viscous Dissipation Effects

Large eddy simulation of turbulent heat transfer in a non-isothermal channel: Effects of temperature-dependent viscosity and thermal conductivity

Numerical simulations of heat transfer in plane channel flow

Heat and Mass Transfer Equations for Turbulent Flow with Wide Ranges of Prandtl and Schmidt Numbers

Conjugate heat transfer in spatial laminar-turbulent transitional channel flow

Near-Wall Determination of the Turbulent Prandtl Number Based on Experiments, Numerical Simulation and Analytical Models

Numerical study on thermal transpiration flows through a rectangular channel

Proposal of a turbulent Prandtl number model for Reynolds-averaged Navier–Stokes approach on the modeling of turbulent heat transfer of low-Prandtl number liquid metal

The Influence of the Prandtl Number on the Style of Vigorous Thermal Convection

Prandtl number effects on heat transfer in viscoelastic turbulent channel flow