Abstract:Drinking water requirements are rapidly increasing while the availability of drinking water is decreasing. Overcoming this problem requires a sustainable energy source, such as solar energy, to desalinate untreated water. The most essential and simplest application of brackish water desalination is solar distillation. However, a limitation of the widespread use of solar distillation is its low yield. Therefore, several research attempts were made to enhance its productivity. Current work deals with a comprehensive review study on the solar distillation system. It presents the most critical factors and parameters affecting the productivity of solar stills and adjustments made to improve daily yield. Weather factors cannot be controlled but affect the performance of solar stills, such as solar radiation, ambient air temperature, and wind speed, while the operational and design parameters of solar stills can be manipulated, such as controlling the depth of the aquarium water and the thickness and angle of inclination of the glass cover. Improve evaporation and condensation mechanisms by increasing the basin water temperature and decreasing the distiller cover temperature, respectively, and tightening the thermal insulation to reduce heat loss to the surroundings. It was concluded that the productivity of solar stills may improve by increasing solar radiation and wind speed, as well as by decreasing the ambient air temperature. As for operational parameters, productivity improves as the depth of the water decreases and the thickness of the cover decreases. Designally, single-slope solar stills captured more solar radiation at both high and low-latitude stations than their double-slope solar still counterparts. Adding a packed layer to the basin's bottom or attaching a rotating shaft to the basin's surface can also enhance the solar distillation system. It has also been shown that the most effective design approach to improving the performance of solar stills is to use a slowly rotating drum inside the still, which can result in a 200-300 % increase in water production. The review will help researchers understand previous designs and develop a new set of characteristics to increase the solar still system's thermal efficacy and produce more distillate. Additionally, limitations are discussed along with suggestions for future research that might improve the productivity and performance of the basin solar still typical operating conditions.

Cascade type solar distiller with the use of photothermic materials applied in the treatment of surface water

Experimental investigation on dish solar distiller with modified absorber and phase change material under various operating conditions

3E analysis of enhancing solar distillation performance through innovative wick convex stepped absorber, PCM, and evacuated tube solar water collector: Experimental investigation

Investigating the performance of dish solar distiller with phase change material mixed with Al2O3 nanoparticles under different water depths

Sustainable and clean water distillation by parabolic dish collector and different heat absorber and thermal storage materials: An experimental study

Experimental and Mechanism Analysis of a Tandem Solar Thermal System with Staged Water Level Reduction

Numerical simulation and experimental study of new design of PV/T as desalination units

Using Direct Solar Energy Conversion in Distillation via Evacuated Solar Tube with and without Nanomaterials

Low-tortuosity Water Microchannels Boosting Energy Utilization for High Water Flux Solar Distillation.

Performance assessment of a novel solar distiller with a fountain-shaped basin design embedded with phase change materials enriched with copper oxide nano-additives: A detailed experimental investigation

Highly Efficient Water Harvesting with Optimized Solar Thermal Membrane Distillation Device

Machine learning-based prediction and augmentation of dish solar distiller performance using an innovative convex stepped absorber and phase change material with nanoadditives

Investigation of the performance of a double-glazing solar distiller with external condensation and nano-phase change material

Enhancing solar distillation through beeswax-infused tubular solar still with a heat exchanger using parabolic trough collector

Sustainable freshwater production using novel cascade solar still with phase change material, serpentine water path, and copper fins

Photothermal Membrane Distillation toward Solar Water Production

High performance reverse solar distiller with enhanced condensation and salt resistance

A Stable All-Day Interfacial Evaporation Multistage Distillation Driven by Solar Photothermal and Solar Electrothermal

Experimental parametric study of membrane distillation unit using solar energy

Performance of solar still units and enhancement techniques: A review investigation