Abstract:Building structures are prone to cracking, leakage, and corrosion under complex loads and harsh marine environments, which seriously affect their durability performance. To design cementitious composites with excellent mechanical and impermeability properties, Engineered Cementitious Composites (ECCs) doped with ultrahigh molecular weight polyethylene short-cut fibers (PE-ECCs) were used as the reference group. Different types (XYPEX-type from Canada, SY1000-type from China) and doses (0%, 0.5%, 1.0%, 1.5%, 2.0%) of Cementitious Capillary Crystalline Waterproofing materials (CCCWs) were incorporated. The effect of CCCWs on the mechanical and impermeability properties of PE-ECCs, and the microscopic changes, were investigated to determine the best type of CCCW to use and the best amount of doping. The results showed that with increasing the CCCW dosage, the effects of both CCCWs on the mechanical and impermeability properties of PE-ECC increased and then decreased, and that the best mechanical and impermeability properties of PE-ECC were achieved when the CCCW dosing was 1.0%. The mechanical properties of the PE-ECC were more obviously improved by XYPEX-type CCCW, with a compressive strength of 53.8 MPa, flexural strength of 11.8 MPa, an ultimate tensile stress of 5.56 MPa, and an ultimate tensile strain of 7.53 MPa, which were 37.95%, 53.25%, 14.17%, and 21.65% higher than those of the reference group, respectively. The effects of the two CCCWs on impermeability were comparable. CCCW-PE-ECC(X1.0%) and CCCW-PE-ECC(S1.0%) showed the smallest permeation heights, 2.6 mm and 2.8 mm, respectively. The chloride ion diffusion coefficients of CCCW-PE-ECC(X1.0%) and CCCW-PE-ECC(S1.0%) exhibited the smallest values, 0.15 × 10−12 m2/s and 0.10 × 10−12 m2/s, respectively. Micromorphological tests showed that the particle size of the XYPEX-type CCCW was finer, and the intensity of the diffraction peaks of C-S-H and CaCO3 of PE-ECC increased after doping with two suitable doping amounts of CCCW. The pore structure was improved, the surface of the matrix was smoother, and the degree of erosion of hydration products on the fiber surface was reduced after chloride ion penetration. XYPEX-type CCCW demonstrated a more obvious improvement in the PE-ECC pore structure.

Durability improvement mechanism of polymer cement protective coating based on functionalized MXene nanosheets modified polyacrylate emulsion

Introducing fiber to enhance the mechanical properties and durability of polymer-modified cement-based coating

Multi-scale Structure of In-Situ Polymerized Cementitious Composites with Improved Flowability, Strength, Deformability and Anti-Permeability

Influence of Cementitious Capillary Crystalline Waterproofing Material on Mechanical Properties and Resistance to Chloride Ion Penetration of Engineered Cementitious Composites

Mechanical Characterization of Polyacrylate Emulsion Modified Mortars

Durability enhancement of cement-based repair mortars through waterborne polyurethane modification: Experimental characterization and molecular dynamics simulations

The Influence of Moisture and Epoxy Bonding Agents on Interfacial Behavior Between Normal Concrete Substrate and Ultrahigh Performance Concrete As a Repair Material: Experimental and Molecular Dynamics Study

Effect of Cementitious Capillary Crystalline Waterproofing Materials on the Mechanical and Impermeability Properties of Engineered Cementitious Composites with Microscopic Analysis

Improved Mechanical Strength of Cement Paste by Polyvinylpyrrolidone and In Situ Polymerized Acrylic Acid

Mechanical properties and anti-efflorescence of cement-based coating containing silicon-aluminum based powder and modified-polyacrylate emulsion

Improvement on Microstructure of Concrete by Polycarboxylate Superplasticizer (pce) and Its Influence on Durability of Concrete

Research on the toughening mechanism of modified nano-silica and silane molecular cages in the multi-scale microfracture of cement-epoxy composite

Micromechanical Analysis of Polyacrylamide-Modified Concrete for Improving Strengths

Effects of the Reinforcement and Toughening of Acrylate Resin/Caco3 Nanoparticles on Rigid Poly(Vinyl Chloride)

Desert silty sand modified by anionic PAM and ordinary portland cement: Microfabric reinforcement and durability

Research and application progress of nano-modified coating in improving the durability of cement-based materials

Mechanical Properties and Microstructure of Waterborne Polyurethane-Modified Cement Composites As Concrete Repair Mortar

Experimental Study on the Influence of a Cementitious Permeable Crystallization Admixture (CPCA) in Improving Concrete Durability

Durability properties of novel coating material produced by alkali-activated/cement powder

Durability Improvement of Cement Using Amphiphilic Calcium Carbonate Nanoparticles

Vinyl Acetate Polymers Modified by Siloxane for Improving Reinforced Concrete: Water Proofness and Anticorrosion