Abstract:Flexible strain sensors are in high demand for the detection of polymorphic changes in smart wearable devices, particularly in response to the tensile and pressure stimuli of the human body. Herein, conductive and elastic nanofiber yarns were combined by electrospun carbon nanohybrids/thermoplastic polyurethane composite nanofiber bundles using a lab-made self-bonding device and surface micro-dissolution of nanofibers. Subsequently, machine-knitted pure nanofiber yarn fabrics were directedly utilized as three-directional strain sensors for transverse tensile, longitudinal tensile, and vertical pressure. The sensing performance of these sensors was regulated by designing three different textures with varying loop structures. The resulting nanofiber fabric sensors exhibited significant tensile sensing anisotropy. The relative resistance change of a double-sided fabric with fully overlapped loops under 50 % longitudinal strain was found to be 88 times higher than that under transverse strain (only −1 %). Additionally, the sensor demonstrated outstanding pressure sensing capabilities, with a wide range of 0.05–100 kPa, a high sensitivity of 7.49 kPa −1 (compared to 0.028 kPa −1 for single-sided fabric), good linearity up to 0.99, and reliable durability exceeding 2000 cycles. A finite element model of stress distribution revealed the sensing mechanism, showing that fabrics with greater intersection points and overlap areas of yarn experienced lower tension levels under transverse stretching, increased transverse contraction under longitudinal stretching, and a higher degree of stress concentration under pressure. To complement the fabric sensors, stretchable wires with a resistance change of less than 0.5 Ω/cm under 50 % elongation and tiny electrodes unaffected by external forces were designed. Finally, the fabric sensors were perfectly integrated into smart sports bandages and football socks to monitor vital signals. This facile and scalable approach offers a promising strategy for the development of tensile/pressure sensing fabrics applied in washable smart textiles.

Knitted Ti3C2T MXene based fiber strain sensor for human–computer interaction

Interfacial modification strategy for the fabrication of high performance fiber-based strain sensors

Highly Stretchable and Strain Sensitive MXene/MXene:MWCNTs@TPU Fiber with Hierarchical Conductive Layers and Porous Elastic Core Structure

High-Performance Wearable Strain Sensor Based on MXene@Cotton Fabric with Network Structure

A Wearable Strain Sensor Based on Fiber-structured PU/MXene/CNT Composite with Ultra-high Sensitivity and Broad Sensing Range

Knitted structural design of MXene/Cu2O based strain sensor for smart wear

A Flexible and Stretchable MXene/Waterborne Polyurethane Composite-Coated Fiber Strain Sensor for Wearable Motion and Healthcare Monitoring

MXene Composite and Coaxial Fibers with High Stretchability and Conductivity for Wearable Strain Sensing Textiles

Facile fabrication and performance of robust polymer / carbon nanotube coated spandex fi bers for strain sensing

Facile Fabrication and Performance of Robust Polymer/carbon Nanotube Coated Spandex Fibers for Strain Sensing

Flexible Ti3C2Tx MXene/ink Human Wearable Strain Sensors with High Sensitivity and a Wide Sensing Range

Ultra‐Stretchable Porous Fiber‐Shaped Strain Sensor with Exponential Response in Full Sensing Range and Excellent Anti‐Interference Ability toward Buckling, Torsion, Temperature, and Humidity

A Highly Stretchable and Ultra-Sensitive Strain Sensing Fiber Based on a Porous Core-Network Sheath Configuration for Wearable Human Motion Detection

Highly Stretchable and Ultra-Sensitive Strain Sensing Fiber Based on a Porous Core-Network Sheath Configuration for Wearable Human Motion Detection

Wearable CNT/Ti3C2Tx MXene/PDMS composite strain sensor with enhanced stability for real-time human healthcare monitoring

Wearable Strain Sensing Textile Based on One-Dimensional Stretchable and Weavable Yarn Sensors

Highly Sensitive and Stretchable MXene/CNTs/TPU Composite Strain Sensor with Bilayer Conductive Structure for Human Motion Detection.

High-Performance Foam-Shaped Strain Sensor Based on Carbon Nanotubes and Ti3C2Tx MXene for the Monitoring of Human Activities.

Encapsulated core–sheath carbon nanotube–graphene/polyurethane composite fiber for highly stable, stretchable, and sensitive strain sensor

Three-directional knitted fabric sensor made of elastic carbon-based nanofiber yarn with excellent tensile and pressure sensing performance

Polymer‐Enhanced Highly Stretchable Conductive Fiber Strain Sensor Used for Electronic Data Gloves