Abstract:The separation of CO2 from N2 remains a highly challenging task in postcombustion CO2 capture processes, primarily due to the relatively low CO2 content (3-15%) compared to that of N2 (70%). This challenge is particularly prominent for carbon-based adsorbents that exhibit relatively low selectivity. In this study, we present a successfully implemented strategy to enhance the selectivity of composite aerogels made of reduced graphene oxide (rGO) and functionalized polymer particles. Considering that the CO2/N2 selectivity of the aerogels is affected on the one hand by the surface chemistry (offering more sites for CO2 capture) and fine-tuned microporosity (offering molecular sieve effect), both of these parameters were affected in situ during the synthesis process. The resulting aerogels exhibit improved CO2 adsorption capacity and a significant reduction in N2 adsorption at a temperature of 25 °C and 1 atm, leading to a more than 10-fold increase in selectivity compared to the reference material. This achievement represents the highest selectivity reported thus far for carbon-based adsorbents. Detailed characterization of the aerogel surfaces has revealed an increase in the quantity of surface oxygen functional groups, as well as an augmentation in the fractions of micropores (<2 nm) and small mesopores (<5 nm) as a result of the modified synthesis methodology. Additionally, it was found that the surface morphology of the aerogels has undergone important changes. The reference materials feature a surface rich in curved wrinkles with an approximate diameter of 100 nm, resulting in a selectivity range of 50-100. In contrast, the novel aerogels exhibit a higher degree of oxidation, rendering them stiffer and less elastic, resembling crumpled paper morphology. This transformation, along with the improved functionalization and augmented microporosity in the altered aerogels, has rendered the aerogels almost completely N2-phobic, with selectivity values ranging from 470 to 621. This finding provides experimental evidence for the theoretically predicted relationship between the elasticity of graphene-based adsorbents and their CO2/N2 selectivity performance. It introduces a new perspective on the issue of N2-phobicity. The outstanding performance achieved, including a CO2 adsorption capacity of nearly 2 mmol/g and the highest selectivity of 620, positions these composites as highly promising materials in the field of carbon capture and sequestration (CCS) postcombustion technology.

Quaternized Graphene for High‐Performance Moisture Swing Direct Air Capture of CO2

Unveiling anomalous CO 2 -to-N 2 selectivity of graphene oxide.

Moisture-swing sorption for carbon dioxide capture from ambient air: a thermodynamic analysis.

Moisture Swing Sorbent for Carbon Dioxide Capture from Ambient Air.

Porosity and hydrophilicity modulated quaternary ammonium-based sorbents for CO<sub>2</sub> capture

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

Improving CO2 adsorption efficiency of an amine-modified MOF-808 through the synthesis of its graphene oxide composites

Enhancing CO2 capture through innovating monolithic graphene oxide frameworks

Graphene Oxide Functionalized by Poly(ionic Liquid)s for Carbon Dioxide Capture

Graphene Oxide‐Arginine Composites: Efficient Dual Function Materials for Integrated CO2 Capture and Conversion

A Moisture Swing Sorbent for Direct Air Capture of Carbon Dioxide: Thermodynamic and Kinetic Analysis

A Novel Strategy to Enhance the Performance of CO2 Adsorption Separation: Grafting Hyper-cross-linked Polyimide onto Composites of UiO-66-NH2 and GO

Sustainable CO2 adsorbent via amine–phosphate coupling of glycated chitosan and electrochemically exfoliated graphene

Graphene Oxide Constructed Nano Newton's Cradle for Ultrafast and Highly Selective CO2 Transport

Review of moisture swing sorbents for carbon dioxide capture from ambient air

Graphene membranes with pyridinic nitrogen at pore edges for high-performance CO 2 capture

Resembling Graphene/Polymer Aerogel Morphology for Advancing the CO2/N2 Selectivity of the Postcombustion CO2 Capture Process

Graphene–terpyridine Complex Hybrid Porous Material for Carbon Dioxide Adsorption

Experimental kinetics and thermodynamics investigation: Chemically activated carbon-enriched monolithic reduced graphene oxide for efficient CO2 capture

Designing and Screening of Moisture‐Swing Porous Adsorbents for Rapid CO2 Capture from Air

Insight into the Co2 Capturer Derived from Graphene/Mgo Composite