Abstract:Intelligent reflecting surface (IRS) has drawn a lot of attention recently as a promising new solution to achieve high spectral and energy efficiency for future wireless networks. By utilizing massive low-cost passive reflecting elements, the wireless propagation environment becomes controllable and thus can be made favorable for improving the communication performance. Prior works on IRS mainly rely on the instantaneous channel state information (I-CSI), which, however, is practically difficult to obtain for IRS-associated links due to its passive operation and large number of reflecting elements. To overcome this difficulty, we propose in this paper a new two-timescale (TTS) transmission protocol to maximize the achievable average sum-rate for an IRS-aided multiuser system under the general correlated Rician channel model. Specifically, the passive IRS phase shifts are first optimized based on the statistical CSI (S-CSI) of all links, which varies much slowly as compared to their I-CSI; while the transmit beamforming/precoding vectors at the access point (AP) are then designed to cater to the I-CSI of the users' effective fading channels with the optimized IRS phase shifts, thus significantly reducing the channel training overhead and passive beamforming design complexity over the existing schemes based on the I-CSI of all channels. Besides, for ease of practical implementation, we consider discrete phase shifts at each reflecting element of the IRS. For the single-user case, an efficient penalty dual decomposition (PDD)-based algorithm is proposed, where the IRS phase shifts are updated in parallel to reduce the computational time. For the multiuser case, we propose a general TTS stochastic successive convex approximation (SSCA) algorithm by constructing a quadratic surrogate of the objective function, which cannot be explicitly expressed in closed-form. Simulation results are presented to validate the effectiveness of our proposed algorithms and evaluate the impact of S-CSI and channel correlation on the system performance.

Configuring Intelligent Reflecting Surface With Performance Guarantees: Blind Beamforming

Blind Beamforming for Coverage Enhancement with Intelligent Reflecting Surface

Outage-Constrained Robust Beamforming for Intelligent Reflecting Surface Aided Wireless Communication

Coordinating Multiple Intelligent Reflecting Surfaces Without Channel Information

Adaptive Blind Beamforming for Intelligent Surface

Hybrid Beamforming for Distributed Intelligent Reflecting Surfaces-Aided Systems

Amplitude-Dependent Phase-Gradient Directional Beamforming for IRS: A Scalable Optimization Framework

Intelligent Reflecting Surface Enhanced Wireless Network: Joint Active and Passive Beamforming Design

Intelligent Reflecting Surface Enhanced Wireless Networks: Two-Timescale Beamforming Optimization.

Secure Beamforming Design for Reconfigurable Intelligent Surface Assisted Downlink Transmission

Intelligent Reflecting Surface: Practical Phase Shift Model and Beamforming Optimization

Beamforming Design for Reconfigurable Intelligent Surface Enhanced Full-duplex Ambient Backscatter Communication Networks

Intelligent Reflecting Surface Aided Multicasting with Random Passive Beamforming.

Robust Beamforming for RIS-Assisted Wireless Communications with Discrete Phase Shifts.

Aerial Intelligent Reflecting Surface: Joint Placement and Passive Beamforming Design With 3D Beam Flattening

Beam Scanning Design and Performance Analysis for Near-Field IRS-Aided Integrated Sensing and Communication Systems

Distributed Intelligent Reflecting Surfaces-Aided Communication System: Analysis and Design

Beamforming and Transmit Power Design for Intelligent Reconfigurable Surface-aided Secure Spatial Modulation

Intelligent Reflecting Surface Enhanced Wireless Network via Joint Active and Passive Beamforming

Intelligent Reflecting Surface Aided Wireless Communication Systems: Joint Location and Passive Beamforming Design