Abstract:Chemical-looping combustion (CLC), employing metal oxide(s) as the oxygen carrier for solid fuels (such as coal and biomass) combustion, is of growing interest thanks to its low cost of CO2 capture and the high system conversion efficiency. In this work, Fe2O3-containing wastes from the steel industry were applied as the oxygen carrier for chemical looping combustion with a Chinese bituminous coal in a bench-scale fixed-bed reactor. The performance of Fe2O3-containing industrial wastes was estimated with comparison to that of two other commercial iron ores (MAC iron ore from Australia and CVRD iron ore from Brazil). Effects of the operating pressure of the system (from 0.1 to 0.5 MPa) and cycle number (0-20) on the performance of the oxygen carriers were extensively studied, in terms of overall gas composition, carbon conversion, and its conversion rate. The Fe2O3-containing industrial wastes were remarkably sensitive with the operating pressure, as more pyrolysis gases and char gasification products were converted under higher pressure leading to higher concentration of CO2 and lower concentrations of CO and CH4. The elevated pressure also increased the carbon conversion and the overall reaction rate. The reactivity and porosity of the Fe2O3-containing industrial wastes under atmospheric pressure were notably enhanced by the reduction cycles, giving the concentration of 9996 CO2 and the carbon conversion 81.41% after 20 cycles. Comparatively, the Fe2O3-containing industrial wastes exhibited better performance as oxygen carrier than the other two iron ores (MAC iron ore and CVRD iron ore), while the two iron ores behaved similarly to the Fe2O3-containing industrial waste with regard to the variation of operating pressure and cycles. It could be concluded that the Fe2O3-containing industrial wastes would be the outstanding oxygen carrier for chemical-looping combustion of coal over the other two iron ores.

Decarbonising blast furnace gas with chemical looping using low oxygen potential ferrites: process and thermodynamic analysis

Insight into the Fe2O3/CaO-based chemical looping process for biomass conversion

Development of a Steel-Slag-Based, Iron-Functionalized Sorbent for an Autothermal Carbon Dioxide Capture Process.

Chemical Looping Conversion of Methane via Fe2O3-LaFeO3 Calcined from LaFe-MOF Precursor

Use of Fe2O3-Containing Industrial Wastes As the Oxygen Carrier for Chemical-Looping Combustion of Coal: Effects of Pressure and Cycles

Evaluation of Pyrite Cinders from Sulfuric Acid Production As Oxygen Carrier for Chemical Looping Combustion

Chemical looping coal gasification with calcium ferrite and barium ferrite via solid–solid reactions

The use of iron oxide as an oxygen carrier in chemical-looping combustion of methane with inherent separation of CO2

CO2 abatement from the iron and steel industry using a combined Ca–Fe chemical loop

Chemical looping co-conversion of CH4 and CO2 using Fe2O3/Al2O3 pellets as both oxygen carrier and catalyst in a fluidized bed reactor

Thermodynamic potential of high temperature chemical looping combustion with molten iron oxide as the oxygen carrier

Spinel-Structured Ternary Ferrites As Effective Agents for Chemical Looping CO2 Splitting

Computational Fluid Dynamics Study of the Thermochemical Behaviors in an Ironmaking Blast Furnace with Oxygen Enrichment Operation

CO2-free conversion of CH4 to syngas using chemical looping

Pressure‐Induced Enhancement in Chemical Looping Reforming of CH4 : A Thermodynamic Analysis with Fe‐Based Oxygen Carriers

Mineral Carbonation of CO2 with Utilization of Coal Gasification Slags Based on Chemical Looping

Copper and Cobalt Co-Doped Ferrites As Effective Agents for Chemical Looping CO2 Splitting

Oxygen uncoupling chemical looping gasification of biomass over heterogeneously doped La-Fe-O perovskite-type oxygen carriers

Driving Towards Highly Selective and Coking‐Resistant Natural Gas Reforming Through a Hybrid Oxygen Carrier Design

Chemical Looping Combustion of gaseous and solid fuels with manganese-iron mixed oxide as oxygen carrier

Performance and Kinetics of Iron-Based Oxygen Carriers Reduced by Carbon Monoxide for Chemical Looping Combustion