Abstract:This article proposes a modified deadbeat predictive current control (M-DPCC) method to improve the dynamic performance of permanent magnet synchronous motor (PMSM). Classical DPCC only predicts one control cycle of the PMSM, which restricts the dynamic performance since multiple control cycles are required for the transient state under heavy load and rated speed working condition. The proposed M-DPCC extends the single-step prediction to the entire dynamic interval in the transient state, by which the comprehensive optimization on the angle of the stator voltage vector can be implemented. Moreover, M-DPCC performed multi-step deadbeat calculation to keep the computation modest. To verify the effectiveness of the proposed M-DPCC, transient-state performance of PMSM using the M-DPCC method, the modulated model predictive control and classical DPCC are explored under a wide range of working condition. Comparative simulation and experimental results indicate that dynamic performance of the PMSM can be improved, especially under rated speed and heavy load conditions. Besides, the parameter sensitivity to inductance mismatch of the three methods is carried out. The stable operation range of the M-DPCC under inductance mismatch is larger than the other two methods. Moreover, the computation complexity of the three methods were investigated. The M-DPCC acquired less computation time than the modulated model predictive control.

Improved Position-offset Based Online Parameter Estimation of PMSMs Under Constant and Variable Speed Operations

A Novel Full Electrical Parameters Estimation Method of Permanent Magnet Linear Synchronous Machines Considering Parameter Asymmetry

Robustness Analysis and Enhancement of Deadbeat Predictive Control for Permanent Magnet Linear Synchronous Machines with Asymmetric Model

An Enhanced Sensorless Control Scheme for PMSM Drives Considering Self-inductance Asymmetry

Dynamic Regressor Extension and Mixing-Based Parameter Estimation for Permanent Magnet Linear Synchronous Machines Considering Parameter Asymmetry

Full Parameter Estimation for Permanent Magnet Synchronous Motors.

A Novel Rotor Position-Offset Injection-Based Online Parameter Estimation of Sensorless Controlled Surface-mounted PMSMs

A Modified Deadbeat Predictive Current Control for Improving Dynamic Performance of PMSM

An Incremental Deadbeat Predictive Current Control Method for PMSM with Low Sensitivity to Parameter Variation

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

An improved rotor position estimation in PMSM with low-resolution hall-effect sensors

High Precision Off-line Parameters Identification of PMSM Considering Dead-time Effect

A Modified Deadbeat Predictive Current Control with Improved Dynamic Performance under Insufficient Voltage Margin for IPMSM

Online Identification of Inductance and Flux Linkage for SPMSMs Decoupled from Resistance Voltage Drop and VSI Nonlinearity

An Improved Method to Estimate Initial Rotor Position for Surface-Mounted Permanent Magnet Synchronous Motors

Overall Electrical Parameters Identification for IPMSMs Using Current Derivative to Avoid Rank Deficiency

A New and Fast Method for On-line Estimation of d and q Axes Inductances of Interior Permanent Magnet Synchronous Machines Using Measurements of Current Derivatives and Inverter DC-Bus Voltage

Maximum Torque Per Ampere Control of IPMSM Based on Online Parameter Identification Considering Cross-coupling and Saturation Effects

High-Performance Position Estimation Method Based on the Error-Corrected State Observer and Its Application on Permanent Magnet Synchronous Machine

Start method for PMSM without position sensor in rotating conditions

An Online Estimation Method for Both Stator Inductance and Rotor Flux Linkage of SPMSM Without Dead-Time Influence