Abstract:The demand for energy storage devices made from biodegradable materials has increased significantly due to sustainability. Currently, such devices possess vital issues, such as high manufacturing costs and toxicity, low reliability, as well as poor electrochemical performance. In this research, microwave synthesis was conducted to fabricate a low-cost, high-performing, plant-based electroactive material. MnO2 microparticles fabricated via microwave irradiation were deposited on two plant-based materials as substrates made of Al/lignin and Al/AC/lignin. The quasi-solid-state supercapacitors were assembled using a polymeric gel electrolyte of PVA/H3PO4. Scanning electron microscopy was performed to examine the polydispersity, morphology, and porosity of the micro-MnO2 deposited materials. FTIR and UV-vis spectroscopy were performed to study the composition and verify deposition of micro-MnO2 on the lignin-based matrixes. Cyclic voltammetry (CV) was employed to study the polarization resistance of the system. The cyclic charge-discharge (CCD) and electrochemical impedance spectroscopy (EIS) were performed to observe cyclic performance and interfacial resistances. Electrochemical tests showed that after 700 cycles of charge-discharge, both the supercapacitors exhibited high capacitance retention above 90%. Compared to the existing technology, this method enables consistent material structurization with tunable properties due to the controlled heating time and exposure to radiation with minimal waste. This work provides an alternative approach to synthesize low-cost and scalable green composite electrodes for flexible supercapacitors.

In-situ growth of homogeneous δ-MnO 2 within lignin based porous carbon to reassemble uniform mesoporous crosslinked 3D-network structure for supercapacitors

Mn0.5Co2.5O4 Nanofibers Intercalated into Graphene Frameworks with Mesoporous Structure for Batteries and Supercapacitors

Synthesis of MnO2/N-doped Ultramicroporous Carbon Nanospheres for High-Performance Supercapacitor Electrodes

Kirkendall Effect Induced One-Step Fabrication of Tubular Ag/MnOx Nanocomposites for Supercapacitor Application

MnO2 Nanoflakes/hierarchical Porous Carbon Nanocomposites for High-Performance Supercapacitor Electrodes

Interconnected Δ–mno 2 Nanosheets Anchored on Porous Carbon Derived from Reed Residue Waste As High-Performance Electrode for Supercapacitor

Nanoarchitectured MnO2 Confined to Mesoporous Carbon Microspheres As Bifunctional Electrodes for High-Performance Supercapacitors and Lithium-Ion Capacitors

MnO2-decorated 3D Porous Carbon Skeleton Derived from Mollusc Shell for High-Performance Supercapacitor

In Situ Growth Of Mno2 Nanosheets On Activated Carbon Fibers: A Low-Cost Electrode For High Performance Supercapacitors

In-situ Growth of MnO2 Crystals under Nanopore-Constraint in Carbon Nanofibers and Their Electrochemical Performance

Microwave Synthesis of MnO2-Lignin Composite Electrodes for Supercapacitors

High-areal-capacitance electrode constructed by lignin-based microporous carbon nanofibers for supercapacitors

Hierarchical Manganese Oxide/Carbon Nanocomposites for Supercapacitor Electrodes

Fabricating N, P-Codoped Hierarchical Porous Carbons from Lignin via Assembled Templating and Activation Strategy for High-Performance Supercapacitors

One-step fabrication of biomass-derived hierarchically porous carbon/MnO nanosheets composites for symmetric hybrid supercapacitor

MnOx nanosheets anchored on a bio-derived porous carbon framework for high-performance asymmetric supercapacitors

Bidirectional pore-creating strategy towards lignin-based heteroatom-doped porous carbon for supercapacitors

MnO2 Nanosheets Grown on Internal Surface of Macroporous Carbon with Enhanced Electrochemical Performance for Supercapacitors

Molten-Salt-Assisted Synthesis of Hierarchical Porous MnO@Biocarbon Composites as Promising Electrode Materials for Supercapacitors and Lithium-Ion Batteries

Morphology and structure control of lignin-derived hierarchical porous carbon for high-performance supercapacitors

In Situ Chemical Synthesis of MnO 2 /HMCNT Nanocomposite with a Uniquely Developed Three-Dimensional Open Porous Architecture for Supercapacitors