A High-Efficiency and Fast-Transient Low-Dropout Regulator With Adaptive Pole Tracking Frequency Compensation Technique

Xin Ming,Hua Liang,Zhi-Wen Zhang,Yang-Li Xin,Yao Qin,Zhuo Wang

DOI: https://doi.org/10.1109/tpel.2020.2984815

IF: 5.967

2020-11-01

IEEE Transactions on Power Electronics

Abstract:An advanced smooth pole tracking technique for a low dropout (LDO) regulator with a ceramic capacitor is presented in this article. Normally, the dominant pole is at the output of an LDO and becomes load dependent, which may cause a loop stability issue during the whole load-current application range. The proposed frequency compensation methodology with adaptive load resistor control of an error amplifier (EA) alleviates the problem and reduces the dependence of equivalent series resistance of an output capacitor. Moreover, combined with this compensation strategy, an ultrafast EA by utilizing a transconductance enhancement technique is proposed to greatly reduce output voltage spikes as well as response time of the LDO during transient. This circuit has been implemented in a 0.18-μm standard CMOS process and occupies an active chip area of 0.017 mm². Experimental results show that it can deliver 150 mA load current at 200 mV dropout voltage. Good loop stability and transient responses are easily achieved without degrading other important LDO parameters.

engineering, electrical & electronic

What problem does this paper attempt to address?

### Problems Addressed by the Paper

The paper primarily addresses the issues of maintaining loop stability and transient response of low dropout linear regulators (LDOs) under varying load current conditions. Specifically:

1. **Loop Stability Issue**:
- Traditional LDOs are prone to loop stability issues across different load current ranges, especially when the equivalent series resistance (ESR) of the output capacitor varies.
- The paper proposes an adaptive pole-tracking technique that dynamically adjusts the output impedance of the error amplifier (EA) to ensure loop stability across the entire load current range.

2. **Transient Response Issue**:
- Conventional frequency compensation methods sacrifice transient response performance under light load conditions.
- The paper combines transmission gain enhancement techniques to propose a high-bandwidth, fast transient response error amplifier, achieving quick transient response even under heavy load conditions and reducing voltage spikes.

3. **Frequency Response Optimization Issue**:
- Traditional methods struggle to achieve full-range frequency response optimization under different load conditions.
- The proposed technique allows the non-dominant pole (pG) to move smoothly with load changes, optimizing frequency response across the entire load range.

In summary, the paper aims to address the issues of maintaining loop stability and fast transient response of LDOs under varying load conditions through adaptive pole-tracking and transmission gain enhancement techniques.