Abstract:Abstract. Terrestrial laser scanners are powerful measurement devices commonly used for 3D modelling tasks generating large volumes of data with fast acquisition as a first priority. However, these scanners can alternatively be used to produce near real-time, engineering quality spatial data concerning the changing state of manufactured components. This paper provides a comprehensive analysis of two terrestrial laser scanners capturing aerospace materials and components, and their associated quality measures. In order to explore the limitations of the tested TLS instruments, a mechanical jig was designed incorporating both a rotation and translation stage. This study involved three elements of a point cloud processing workflow: data capture, registration and feature extraction. Sphere-based 7DoF registration is applied using two different commercially available software packages with varying levels of user control. To analyse the quality of the registration, control points extracted from captured point clouds were compared to nominal values measured using a laser tracker. The quality of the registration was consistent, with differences kept between 0.4 mm and 0.6 mm. To evaluate the quality of the captured point clouds, two different tests were conducted. This included planar fit tests on an aluminium drilling template, and sphere fitting tests on white 1.5” spherical targets in magnetic nests. One half of the aluminium drilling template was coated with matte spray to reduce erroneous laser reflections. Finally, the registered point clouds were input to a developed algorithm which automatically extracted drilling holes from the drilling template. Previous scanning work performed on aerospace materials showed evidence of optical rattling caused by high intensity reflections from the interior holes in a drilling template. Further exploration showed that the amount of optical rattle varies systematically with incidence angle. This work demonstrates a systematic offset in the location of extracted hole centres in the drilling template. This offset is dependent on laser incidence angle, and can therefore be accounted for when locating manufacturing components from a known scanning position.

Laser Triangulation Sensors Performance in Scanning Different Materials and Finishes

Present Status of High Precision Laser Displacement Sensor Based on Triangulation

Study on the Analysis for Error in Triangular Laser Measurement and the Method of Improving Accuracy

A High-Precision Laser Displacement Measurement System

Status Of Laser Displacement Measurement Techniques Based On Triangulation

Design of 3D Laser Radar Based on Laser Triangulation

A Novel Method for Analyzing the Influence of Relative Attitude of Laser Profile Scanner on 3D Measurement System

Metrology Benchmarking of 3D Scanning Sensors Using a Ceramic GD&T-Based Artefact

Optical Characterization of Materials for Precision Reference Spheres for Use with Structured Light Sensors

EXPLORING THE LIMITS OF TERRESTRIAL LASER SCANNERS ON AEROSPACE MATERIALS

A Scheme for Enhancing Precision in 3-Dimensional Positioning for Non-Contact Measurement Systems Based on Laser Triangulation

3D geometrical inspection of complex geometry parts using a novel laser triangulation sensor and a robot

Study on the Characteristics of the Laser Triangulation Scanning Probe

Using a Slit to Suppress Optical Aberrations in Laser Triangulation Sensors

Evaluation of the Metrological Performance of a Handheld 3D Laser Scanner Using a Pseudo-3D Ball-Lattice Artifact

Design and Analysis of Terrestrial Laser Scanner Based on a 3-SPR Parallel Mechanism for Improved Anti-Occlusion Scanning

Impact of multireflections on measurement accuracy in the endoscopic 3D reconstruction of gearing geometries

An Improved Low-Noise Processing Methodology Combined with PCL for Industry Inspection Based on Laser Line Scanner

POINT CLOUD ACQUISITION TECHNIQUES BY USING SCANNING LIDAR FOR 3D MODELLING AND MOBILE MEASUREMENT

Increasing the Reliability of Data Collection of Laser Line Triangulation Sensor by Proper Placement of the Sensor

A Planar-Pattern-based Calibration Method for High-Precision Structured Laser Triangulation Measurement