Abstract: Escaping of the liquid molecules from their liquid bulk into the vapour phase at the vapour-liquid interface is controlled by the vapour diffusion process, which nevertheless hardly senses the macroscopic shape of this interface. Here, deformed sessile drops due to gravity and surface tension with various interfacial profiles are realised by tilting flat substrates. The symmetry broken of the sessile drop geometry leads to a different evaporation behavior compared to a drop with a symmetric cap on a horizontal substrate. Rather than the vapour-diffusion mechanism, heat-diffusion regime is defined here to calculate the local evaporation flux along the deformed drop interface. A local heat resistance, characterised by the liquid layer thickness perpendicular to the substrate, is proposed to relate the local evaporation flux. We find that the drops with and without deformation evaporate with a minimum flux at the drop apex, while up to a maximum one with a significantly larger but finite value at the contact line. Counterintuitively, the deviation from the symmetric shape due to the deformation on a slope, surprisingly enhances the total evaporation rate; and the smaller contact angle, the more significant enhancement. Larger tilt quickens the overall evaporation process and induces a more heterogeneous distribution of evaporative flux under gravity. Interestingly, with this concept of heat flux, an intrinsic heat resistance is conceivable around the contact line, which naturally removes the singularity of the evaporation flux showing in the vapour-diffusion model. The detailed non-uniform evaporation flux suggests ways to control the self-assembly, microstructures of deposit with engineering applications particularly in three dimensional printing where drying on slopes is inevitable.

Viscous Withdrawal of Miscible Liquid Layers

Scaling dependence on the fluid viscosity ratio in the selective withdrawal transition

Removal of a Dense Bottom Layer by a Gravity Current

Scaling at the selective withdrawal transition

Viscous flow of a volatile liquid on an inclined heated surface

Velocity in a Liquid Subjected to a Shear Force at the Liquid Surface with a Receding Velocity

Liquid toroidal drop in compressional flow with arbitrary drop-to-ambient fluid viscosity ratio

The dissolution of a miscible drop rising or falling in another liquid at low Reynolds number

Liquid films falling down a vertical fiber: modeling, simulations and experiments

Giant superhydrophobic slip of shear-thinning liquids

The viscous surface-internal wave problem: global well-posedness and decay

Drops, liquid layers and the Marangoni effect

Evaporation of binary liquids from a capillary tube

Escape from pinch-off during contraction of liquid sheets and two-dimensional drops of low-viscosity fluids

Retraction of large liquid strips

Local evaporation flux of deformed liquid drops

Capillary imbibition in a diverging flexible channel

The vortex-entrainment sheet in an inviscid fluid: theory and separation at a sharp edge

Developed liquid film passing a trailing edge: small-scale analysis and the `teapot effect' at large Reynolds numbers

Viscoelastic Liquid Film Flowing Down A Flexible Tube