Ring opening copolymerization of δ-valerolactone with 2-methyl-1,3-dioxane-4-one towards poly(3-hydroxypropionate- co -5-hydroxyvalerate) copolyesters

Wenli Zhang,Li Han,Zhipeng Liu,Yidi Li,Jingzhao Shang,Xuefei Leng,Yang Li,Zhiyong Wei

DOI: https://doi.org/10.1039/d2py00215a

IF: 4.6

2022-01-01

Polymer Chemistry

Abstract:A straightforward strategy of ring-opening copolymerization (ROCOP) towards synthetic copolyesters.

polymer science

What problem does this paper attempt to address?

Controllable Ring-opening Polymerization of Δ-Valerolactone Catalyzed by Quinolinyl-Urea/MTBD Systems

Xin-Yu Liu,Liang Zhu,Su-Yun Jie,Bo-Geng Li

DOI: https://doi.org/10.1007/s10118-024-3127-3

2024-01-01

Chinese Journal of Polymer Science

Abstract:Due to their excellent biocompatibility and biodegradability, aliphatic polyesters are widely used in the biomedical, packaging and agricultural fields, which are usually accessed by the ring-opening polymerization (ROP) of lactones and the catalysts particularly play an important role. Herein a series of quinolinyl-urea catalysts have been synthesized via the reaction between isocyanate and aminoquinoline with an amino group at different substitution positions and characterized. In combination with 7-methyl-1, 5, 7-triazabicyclo[4,4,0]dec-5-ene (MTBD) as a cocatalyst and benzyl alcohol (BnOH) as an initiator, 1-(3,5-bis(trifluoromethyl)phenyl)-3-(quinolin-3-yl)urea (3-QU) was observed to be most active for the ROP of δ-valerolactone (δ-VL). The polymerization conditions were optimized by varying the type of organic base, catalyst concentration and reaction temperature. By changing the ratio of [M]0/[I], linear polyvalerolactones (PVLs) with different molecular weights and narrow molecular weight distribution were prepared. The kinetic and chain extension experiments were carried out to prove the “living”/controllable feature. And the NMR experiments were used to support the proposal of possible mechanism.
Gradient copolymers of epsilon-caprolactone and delta-valerolactone via solvent-free ring-opening copolymerization with a pyridyl-urea/MTBD system

Rui Feng,Suyun Jie,Pierre Braunstein,Bo-Geng Li

DOI: https://doi.org/10.1002/pol.20200174

IF: 3.046

2020-01-01

Journal of Polymer Science

Abstract:The ring-opening copolymerization of epsilon-caprolactone and delta-valerolactone was carried out under solvent-free conditions with a pyridyl-urea (6C-PU)/7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene catalytic system by premixing two monomers, yielding gradient copolyesters with cyclic and linear structures in the absence or presence of an initiator, respectively. The random and block copolyesters of these two monomers were also prepared for comparison. The results of H-1 and C-13 NMR spectra determined the linear and cyclic structure of copolymers. The kinetic experiment was used to determine the consuming rates of two monomers during the polymerization. The topologies and thermal properties of all the copolymers were characterized and compared by NMR and DSC.
Ring-opening Copolymerization of Ε -Caprolactone and Δ -Valerolactone Catalyzed by a 2,6-Bis(amino)phenol Zinc Complex

Qian Hu,Su-Yun Jie,Pierre Braunstein,Bo-Geng Li

DOI: https://doi.org/10.1007/s10118-020-2347-4

2019-01-01

Chinese Journal of Polymer Science

Abstract:In combination with methyllithium, a 2,6-bis(amino)phenol zinc complex 1 was used in the ring-opening polymerization of δ -valerolactone in the absence or presence of benzyl alcohol and showed high efficiency, mainly producing cyclic and linear polyvalerolactones, respectively. On the basis of homopolymerization, the ring-opening copolymerization of ε -caprolactone and δ -valerolactone was investigated. The P(CL- co -VL) random copolymers, PCL- b -PVL and PVL- b -PCL diblock copolymers, were prepared by varying the feeding strategy (premixing or sequential feeding). The copolymer composition was adjusted by varying the feeding ratio of two monomers. The structure and thermal properties of obtained polymers were characterized by GPC, 1 H-NMR, 13 C-NMR, MALDI-TOF mass spectroscopy, and DSC, respectively.
Synthesis of Cyclic and Linear Block Copolyesters via Ring-opening Copolymerization of epsilon-Caprolatone and L-Lactide Catalyzed by Zinc Complex

Li Juan,Du Fanfan,Feng Rui,Hu Qian,Jie Suyun,Li Bogeng

DOI: https://doi.org/10.7503/cjcu20170792

2018-01-01

Abstract:In combination with methyllithium, ring-opening polymerization (ROP) of L-lactide (L-LA) and copolymerization of epsilon-caprolactone (epsilon-CL) and L-LA were investigated in the presence or absence of benzyl alcohol by using an air-stable zinc complex bearing (benzimidazolyl) pyridine alcohol ligand. Similar to the polymerization of epsilon-CL, the monomers were completely converted to polymers in short time in all the cases and high catalytic activities were achieved in the ROP of L-LA. The structural analysis of polymers indicated that in the absence of benzyl alcohol, the polymers obtained were mainly cyclic PLA with relatively broad molecular weight distribution, whereas linear PLA with lower molecular weight and narrower molecular weight distribution predominated in the presence of benzyl alcohol. On the basis of ROP of epsilon-CL and L-LA, the ring-opening copolymerization of epsilon-CL and L-LA was studied with the different CL/LA feeding ratios. A series of linear and cyclic block copolymers with different CL/LA molar ratios was synthesized by the sequential feeding strategy according to the presence or absence of benzyl alcohol in the reaction system. The structure and thermal properties of homopolymers and copolymers were characterized by FTIR, H-1 NMR, C-13 NMR, GPC, DSC and TGA analysis.
Ring-opening Copolymerization of L-Lactide and delta-Valerolactone Catalyzed by Benzoxazolyl Urea Catalyst/MTBD

Chen-lin Ji,Su-yun Jie,Bo-geng Li

DOI: https://doi.org/10.11777/j.issn1000-3304.2021.21400

2022-01-01

Acta Polymerica Sinica

Abstract:In combination with 7-methyl-1,5,7-triazabicyclo[4.4.0]clec-5-ene (MTBD), the benzoxazolyl urea (NO) catalyst was very efficient for the solution ring-opening polymerization of L-lactide (L-LA) in the presence of benzyl alcohol. On the basis of homopolymerization, the solution ring-opening copolymerization of L-LA and delta-valerolactone (delta-VL) was investigated and the PLLA-co-PVL random and PLLA-b-PVL block copolymers were prepared via varying the feeding strategy (premixing or sequential feeding) and the feeding ratio of two monomers. The sequence structure of copolymers was analyzed by H-1- and C-13-NMR spectra and the copolymer compositions in the copolymers were in consistence with the feeding ratio of two monomers. The randomness R of the random copolymers prepared via premixing two monomers was about 0.5, which was between completely random and block copolymers. The thermal properties were tested by the differential calorimetry scanning (DSC). When the contents of two monomers in the copolymers were relatively close, no melting peak could be observed in the DSC curves and the samples was rubbery at room temperature as an amorphous polymer. As the content of VL segments decreased, the glass transition temperature of random copolymers increased. In addition, the block copolymers (PLLA-b-PVL) were synthesized through the "one-pot method" and "chain extension method". The sequence of segments was controllable and the randomness R approached zero. [GRAPHICS] .
Gradient copolymers of <scp>ε‐caprolactone</scp> and <scp>δ‐valerolactone</scp> via solvent‐free ring‐opening copolymerization with a pyridyl‐urea/ <scp>MTBD</scp> system

Rui Feng,Suyun Jie,Pierre Braunstein,Bo‐Geng Li

DOI: https://doi.org/10.1002/pol.20200174

IF: 3.046

2020-01-01

Journal of Polymer Science

Abstract:The ring‐opening copolymerization of ε‐caprolactone and δ‐valerolactone was carried out under solvent‐free conditions with a pyridyl‐urea ( 6C‐PU )/7‐methyl‐1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene catalytic system by premixing two monomers, yielding gradient copolyesters with cyclic and linear structures in the absence or presence of an initiator, respectively. The random and block copolyesters of these two monomers were also prepared for comparison. The results of 1 H and 13 C NMR spectra determined the linear and cyclic structure of copolymers. The kinetic experiment was used to determine the consuming rates of two monomers during the polymerization. The topologies and thermal properties of all the copolymers were characterized and compared by NMR and DSC.
Ring-Opening Polymerization of CO<sub>2</sub>-Based Disubstituted -Valerolactone toward Sustainable Functional Polyesters

Sicong Yue,Tianwen Bai,Songyi Xu,Ting Shen,Jun Ling,Xufeng Ni

DOI: https://doi.org/10.1021/acsmacrolett.1c00341

IF: 5.8

2021-01-01

ACS Macro Letters

Abstract:3-Ethylidene-6-vinyltetrahydro-2H-pyran-2-one (EVL) is a disubstituent dlactone derived from CO2 and 1,3-butadiene. In this contribution, we report the ringopening polymerization (ROP) of EVL with beta-butyrolactone (BBL) as the comonomer catalyzed by scandium triflate [Sc(OTf)(3)]. The obtained polyester bearing active unsaturated bonds has the weight-average molecular weight (M-w) of 4.1 kg/mol, in which the EVL content is 38 mol % in accordance with the initial ratio of 40 mol %. The copolymers are characterized in detail and the cationic ROP mechanism has been confirmed by kinetic study, chain end analysis and density functional theory (DFT) calculation. The modification of the unsaturated bonds in EVL repeating units via the thioene click reaction with mercapto-ended polysarcosine polysarcosine yields the amphiphilic grafting polymers. It is a CO2 fixation approach toward the functional poly(EVL-r-BBL) that is promising as a degradable polyester precursor for adhesive or surface-coating materials.
High Molecular-Weight Cyclic Polyesters from Solvent-Free Ring-Opening Polymerization of Lactones with a Pyridyl-Urea/MTBD

Rui Feng,Suyun Jie,Pierre Braunstein,Bo-Geng Li

DOI: https://doi.org/10.1002/macp.202000075

IF: 2.996

2020-01-01

Macromolecular Chemistry and Physics

Abstract:(Thio)urea/base systems have been widely used in the ring-opening polymerization (ROP) of lactones based on their superior performance in activity and selectivity. Herein, a pyridyl-urea (6C-PU)/7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-ene catalytic system is used to prepare the polyesters with cyclic topology via the ROP of lactones in the absence of initiator under solvent-free conditions. The catalytic system shows high activity in the ROP of delta-valerolactone (delta-VL) and cyclic polyvalerolactones (PVLs) with high molecular weights and narrow molecular weight distribution are obtained despite the existence of some linear products generated during the precipitation process. The structure of the resulting polymers is determined by proton and carbon nuclear magnetic resonance spectra, matrix assisted laser desorption/ionization time of flight mass spectrometry, and intrinsic viscosity studies. A possible mechanism is proposed on the basis of NMR analysis and characteristics of polymerization. Thermal and mechanical properties of cyclic PVLs are investigated through differential scanning calorimetry, thermogravimetric analysis, and tensile test.
How to Open the Ring of a Di‐ene‐Substituted‐δ‐Valerolactone: from Carbon Dioxide and 1,3‐butadiene to Functional Polyesters

Kaihao Chen,Yixuan Mei,Zhuorui Zhang,Jun Ling,Xufeng Ni

DOI: https://doi.org/10.1002/cplu.202300022

2023-01-01

ChemPlusChem

Abstract:As a substituted‐δ‐valerolactone, α‐ethylidene‐δ‐vinyl‐δ‐valerolactone (EVL) provides a method of utilizing carbon dioxide with 1,3‐butadiene to produce functional polymers. Its di‐ene‐substituted lactone ring was considered inactive in polymerization in the past two decades, while successful polymerization attempts of EVL have been reported very recently. Novel synthetic strategies and functional polymers from EVL have been developed. The ring‐opening reactions of EVL and the corresponding polymers as well as the ring‐opening (co)polymerizations of EVL and its derivatives are highlighted in this review. The obtained functional polymers with or without facile post‐polymerization modification possess unique properties, such as amphipathy, elasticity, peel resistance, etc., allowing for application potential in various fields.
Ring‐opening Polymerization of 1,4‐oxathian‐2‐one and Its Copolymerization with Δ‐valerolactone

Qi-Yuan Wang,Meng-Xue Cao,Xiao-Wei Kan,An Lv,Fu-Sheng Du,Zi-Chen Li

DOI: https://doi.org/10.1002/pol.20220054

IF: 3.046

2022-01-01

Journal of Polymer Science

Abstract:Monomer 1,4-oxathian-2-one (OX) was synthesized by a one pot two-step method, and it was oxidized to the sulfone ester monomer, 1,4-oxathian-2-one-4,4-dioxide (OX-SO2). Three organic catalysts, 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD), 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU), and diphenyl phosphate (DPP) were screened for the ring-opening polymerization (ROP) of OX in dichloromethane at 30 degrees C. It was found that OX has a high polymerizability, the TBD-catalyzed ROP is very fast but with serious side reactions, the DBU-catalyzed ROP is moderately controlled, and the DPP-catalyzed ROP is well controlled until the polymerization reach equilibrium. Bulk ROP of OX-SO2 was achieved with stannous octoate ((Sn[Oct](2)) at 130 degrees C. Poly(OX) is a semicrystalline polyester (T-m = 40-60 degrees C, T-g = -39.6 degrees C), while Poly(OX-SO2) is a highly crystalline polyester(T-g = 55 degrees C, T-m = 211 degrees C with decomposition). Kinetics experiments of OX and delta-valerolactone (VL) revealed that VL polymerized faster than OX with DPP as the catalyst. Thermodynamic parameters of the ROP of OX and VL under identical conditions were measured; the ROP of OX is thermodynamically more favorable than that of VL. A series of random copolymers of OX and VL was prepared using TBD as the catalyst and confirmed that the in-chain heteroatom greatly affected the crystallization of the copolymers.
One‐pot Orthogonal Thiol‐ene Click Polymerization and Ring‐opening Grafting Reaction of CO 2 ‐based Disubstituted Δ‐valerolactone

Jiawen Song,Kaihao Chen,Yuanhao Feng,Xufeng Ni,Jun Ling

DOI: https://doi.org/10.1002/pol.20210949

IF: 3.046

2022-01-01

Journal of Polymer Science

Abstract:Being a disubstituted delta-valerolactone synthesized by the telomerization of carbon dioxide with 1,3-butadiene, 3-ethylidene-6-vinyltetrahydro-2H-pyran-2-one (EVL) contains a six-membered ring and two unsaturated groups. This report describes the synthesis of an amphiphilic graft copolymer by the combination of thiol-ene click polymerization and ring-opening grafting reaction of EVL, ethyldithiol (EDT), and methoxy polyethylene glycol (mPEG-OH). The alternating copolymer of P(EVL-alt-EDT) with 17.9 wt% CO2 content and weight-average molecular weight (M-w) of 7 kg/mol was prepared by means of the free radical thiol-ene click polymerization of EVL with EDT initiated by 2,2-dimethoxy-1,2-diphenylethanone under UV irradiation. The following alcoholysis of the lactone ring of P(EVL-alt-EDT) backbone by mPEG-OH is catalyzed by 1,5,7-triazabicyclo[4.4.0]dec-5-ene, producing the amphiphilic graft copolymer P(EVL-alt-EDT)-g-PEG(750) with M-w of 12 kg/mol. The polymers are characterized by nuclear magnetic resonance, Fourier transform infrared, matrix-assisted laser desorption ionization-time of flight mass spectra, size exclusion chromatography and differential scanning calorimetry. The one-pot orthogonal strategy is a new utilization of EVL in synthetic polymers and it is significant to the carbon dioxide transformation.
Ring-Opening Polymerization of CO2-Based Disubstituted δ-Valerolactone toward Sustainable Functional Polyesters.

Xufeng Ni,Ting Shen,S. Yue,Tianwen Bai,Jun Ling,Songyi Xu

DOI: https://doi.org/10.1021/acsmacrolett.1c00341

IF: 5.8

2021-07-29

ACS Macro Letters

Abstract:3-Ethylidene-6-vinyltetrahydro-2H-pyran-2-one (EVL) is a disubstituent δ-lactone derived from CO2 and 1,3-butadiene. In this contribution, we report the ring-opening polymerization (ROP) of EVL with β-butyrolactone (BBL) as the comonomer catalyzed by scandium triflate [Sc(OTf)3]. The obtained polyester bearing active unsaturated bonds has the weight-average molecular weight (Mw) of 4.1 kg/mol, in which the EVL content is 38 mol % in accordance with the initial ratio of 40 mol %. The copolymers are characterized in detail and the cationic ROP mechanism has been confirmed by kinetic study, chain end analysis and density functional theory (DFT) calculation. The modification of the unsaturated bonds in EVL repeating units via the thio-ene click reaction with mercapto-ended polysarcosine polysarcosine yields the amphiphilic grafting polymers. It is a CO2 fixation approach toward the functional poly(EVL-r-BBL) that is promising as a degradable polyester precursor for adhesive or surface-coating materials.

Chemistry,Medicine,Materials Science
Ring-Opening Copolymerizations of a CO2-derived δ-Valerolactone with ε-Caprolactone and L-Lactide

Ian Tonks,Ryan Anderson,Rachel Fine,Rachel Rapagnani

DOI: https://doi.org/10.26434/chemrxiv-2024-s1vmr

2024-04-08

Abstract:Ring-opening random, gradient, and block copolymerizations of the CO2¬-derived δ-valerolactone 3-ethyl-6-vinyltetrahydro-2H-pyran-2-one (EtVP) with ε-caprolactone (ε-CL) and L-lactide (LLA) are reported. By employing both concurrent and sequential addition strategies, a variety of thermal and physical properties could be accessed. Concurrent copolymerization of EtVP with ε-CL yielded gradient copolymers with low glass transition temperatures, while block copolymerizations via sequential addition led to semi-crystalline materials regardless of monomer feed ratios. For LLA copolymerizations, glass transition temperatures increased with LLA incorporation regardless of addi-tion method, but higher Tg values were observed in block copolymerizations from sequential addition. Tensile testing of a poly(EtVP-b-LLA) with molar ratio of 40:60 EtVP:LLA resulted in σ = 0.8 MPa, E = 5.6 MPa and 83% elongation at break. The chemical recyclability of EtVP-based copolymers was explored as an end-of-life option. Both ε-CL and LLA copolymers could be recycled, with block copolymers giving higher yields of recycled monomers than random copolymers.

Chemistry
Diphenyl Phosphate/ethyl Diphenylphosphinite As an Efficient Organocatalytic System for Ring-Opening Polymerization of Ε-Caprolactone and Δ-Valerolactone

Yanping Li,Songyi Xu,Jun Ling,Ke Pan,Yujian Liu,Yougen Chen

DOI: https://doi.org/10.1039/d1py01289d

IF: 4.6

2022-01-01

Polymer Chemistry

Abstract:A novel controlled/living ROP method of ε-CL and δ-VL using ethyl diphenylphosphinite/diphenyl phosphate (EDPP/DPP) organocatalytic system was revealed, which involves the activated monomer mechanism and the reversible chain end deactivation process.
Isomerization Cationic Ring-Opening Polymerization of CO2-Based Disubstituted-δ-Valerolactone

Kaihao Chen,Yuling Lin,Tianwen Bai,Jun Ling,Xufeng Ni

DOI: https://doi.org/10.26434/chemrxiv-2024-6gb3m

2024-08-28

Abstract:The challenging ring-opening homo-polymerization of α-ethylidene-δ-vinyl-δ-valerolactone (EVL), de-rived from CO2 and 1,3-butadiene, has aroused ex-tensive attention in consideration of economic effi-ciency and functionalization potential. Here, we achieve the first cationic ring-opening polymeriza-tion (CROP) of EVL, yielding well-defined polyester PEVL with number average molecular weight up to 12.8 kg/mol and low dispersity of 1.2. The obtained PEVL contains two kinds of structural units derived from EVL and three kinds of alkenyl groups, indicat-ing an isomerization during propagation. The isom-erization is necessary to the propagation, evidenced by density functional theory (DFT) calculation and unavailable CROP of the semi-hydrogenated EVL de-rivative without δ-vinyl group (α-ethylidene-δ-ethyl-δ-valerolactone). The fast intramolecular transfer reaction and slow initiation result in the cyclic to-pology fidelity of PEVL, providing the first example of quantitative formation of cyclic polyester in CROP. PEVL is degradable and recyclable, possessing a low glass transition temperature (Tg) of -33.6 ℃, while the product after modification with 1-octadecanethiol exhibits a melting point (Tm) of 42.2 ℃.

Chemistry
Ring-opening Polymerization of Cyclic Esters Mediated by Zinc Complexes Coordinated with Benzotriazo-Based Imino-Phenoxy Ligands

Yi-Liang Hsieh,Wachara Benchaphanthawee,Hsu-Hung Teng,Ning Huang,Jia-Hao Yang,Jyun-Ru Sun,Gene-Hsiang Lee,Nawee Kungwan,Chi-How Peng

DOI: https://doi.org/10.1016/j.polymer.2023.125687

IF: 4.6

2023-01-01

Polymer

Abstract:A series of zinc complexes coordinated with benzotriazo-based imino-phenoxy ligands (Zn-II(BTPIP)) has been developed for the mediation of ring-opening polymerization (ROP) of e-caprolactone (epsilon-CL) and L-lactide (L-LA). In the presence of Zn-II(BTPIP), the polymerization generated the PCL with the molecular weights in the range of 9600-17700 g mol-1 and narrow dispersity (D) around 1.08 to 1.33 as well as the PLA showing a molecular weight as 12300-14400 g mol(-1) with narrow molecular weight distribution (D < 1.11). Furthermore, the living characters of the linearly increased molecular weight with monomer conversion and the synthesis of the tri-block copolymer of PEG-b-PCL-b-PLA were achieved. The substituent effect of Zn-II(BTPIP) in the ROPs of e-CL and L-LA was rationalized by the DFT calculations based on the coordination-insertion mechanism.
Polyester Platform with High Refractive Indices and Closed-Loop Recyclability from CO2, 1,3-Butadiene, and Thiols

Zhuorui Zhang,Ting Shen,Kaihao Chen,Junjie Zeng,Yixuan Mei,Jun Ling,Xufeng Ni

DOI: https://doi.org/10.1021/acsmacrolett.4c00333

IF: 5.8

2024-01-01

ACS Macro Letters

Abstract:alpha-Ethylidene-delta-vinyl-delta-valerolactone (EVL) is the only intermediate to synthesize copolymers of CO2 with 1,3-butadiene whose ring-opening polymerization (ROP), however, is obstructed by the tiglate group. In the contribution, EVL derivatives are synthesized through a Michael addition reaction to saturate the conjugated double bond as well as introduce various groups to synthesize polyesters with designable molecular weights (M-n = 6.9-12.8 kgmol(-1)), narrow dispersities (& Dstrok; = 1.08-1.19), tunable glass-transition temperatures (T-g = -45-3 degrees C), and excellent refractive indices (n(d) = 1.64-1.79) via living and controlled ROP. The obtained polyesters are able to be recycled to the corresponding monomers, which can prepare comparable polymers with identical side groups, realizing the homorecycling. In addition, the retro-Michael addition reaction is established and employed, realizing heterorecycling, which can alter properties during recycling. We propose a strategy for EVL derivatives and establish the corresponding polyester platform with not only high refractive indices and tunable T(g)s, but also the ability to tailor properties during recycling.
Bifunctional and Recyclable Polyesters by Chemoselective Ring-Opening Polymerization of a δ-Lactone Derived from CO2 and Butadiene

Shaofeng Liu,Jinbo Zhang,Lihang Jiang,Junhao Shen,Pierre Braunstein,Yong Shen,Xiaohui Kang,Zhibo Li

DOI: https://doi.org/10.26434/chemrxiv-2024-0p22l

2024-02-26

Abstract:When aiming at the direct use of CO2 for the preparation of advanced/value-added materials, the synthesis of CO2/olefin copolymers is very appealing but challenging. The δ-lactone 3-ethylidene-6-vinyltetrahydro-2H-pyran-2-one (EVP), synthesized by telomerization of CO2 with 1,3-butadiene, is a promising intermediate. However, chemoselective ring-opening polymerization (ROP) of EVP is hampered by unfavorable thermodynamics and the competitive polymerization of highly reactive C=C double bonds. Herein, we report the first chemoselective ROP of EVP using a phosphazene/urea binary catalyst, affording exclusively a linear unsaturated polyester poly(EVP)ROP, with a molar mass (Mn) up to 6.5 kg·mol-1 and narrow distribution (Ð = 1.24), which can be fully recycled back to the pristine monomer, thus establishing a monomer-polymer-monomer closed-loop life cycle. Remarkably, poly(EVP)ROP features two pendent C=C double bonds per repeating unit, which show distinct reactivity and thus can be properly engaged in sequential functionalizations towards the synthesis of bifunctional polyesters. This methodology provides a facile access to bifunctional and recyclable polyesters from readily available feedstocks. In these polyesters, the carbon dioxide content reaches 33 mol% (29 wt%). The reasons for the remarkable chemoselectivity observed were investigated by Density-functional theory (DFT) calculations.

Chemistry
Ring-Opening Polymerization of Α-Diazo Lactones: Access to Diazo-Containing Polyesters and Their Post-Polymerization Modifications

Lefei Yu,Yisong Wang,Qi Zhou,Xiaotong Wu,Zhenning Yu,Yan Xu,Zi-Chen Li,Jianbo Wang

DOI: https://doi.org/10.1021/acs.macromol.4c00750

IF: 5.5

2024-01-01

Macromolecules

Abstract:The properties of polyesters can be enhanced by the introduction of various functional groups, while transformations of a diazo group via a carbene intermediate provide efficient approaches for functional group introduction. We herein report the first ring-opening polymerization (ROP) of 5, 6, and 7-membered alpha-diazo lactones using t-BuOK as the initiator. The diazo groups can be well tolerated in the polymerization condition, leading to stable, diazo-containing polyesters that can be readily isolated and characterized. Post-polymerization transformations of the diazo groups, including [1,2]-hydrogen migration, Si-H insertions, and S-H insertions, further provide polyesters that are nontrivial to access. Further, the introduction of diazo groups generally increases the ring strain of lactones and alters their polymerizability, which is more pronounced for alpha-diazo gamma-butyrolactone. The ROP of alpha-diazo delta-valerolactone generates a new type of diazo-containing polyesters that can be depolymerized upon heating.

Ring opening copolymerization of δ-valerolactone with 2-methyl-1,3-dioxane-4-one towards poly(3-hydroxypropionate- co -5-hydroxyvalerate) copolyesters

Controllable Ring-opening Polymerization of Δ-Valerolactone Catalyzed by Quinolinyl-Urea/MTBD Systems

Gradient copolymers of epsilon-caprolactone and delta-valerolactone via solvent-free ring-opening copolymerization with a pyridyl-urea/MTBD system

Ring-opening Copolymerization of Ε -Caprolactone and Δ -Valerolactone Catalyzed by a 2,6-Bis(amino)phenol Zinc Complex

Synthesis of Cyclic and Linear Block Copolyesters via Ring-opening Copolymerization of epsilon-Caprolatone and L-Lactide Catalyzed by Zinc Complex

Ring-opening Copolymerization of L-Lactide and delta-Valerolactone Catalyzed by Benzoxazolyl Urea Catalyst/MTBD

Gradient copolymers of <scp>ε‐caprolactone</scp> and <scp>δ‐valerolactone</scp> via solvent‐free ring‐opening copolymerization with a pyridyl‐urea/ <scp>MTBD</scp> system

Ring-Opening Polymerization of CO<sub>2</sub>-Based Disubstituted -Valerolactone toward Sustainable Functional Polyesters

High Molecular-Weight Cyclic Polyesters from Solvent-Free Ring-Opening Polymerization of Lactones with a Pyridyl-Urea/MTBD

How to Open the Ring of a Di‐ene‐Substituted‐δ‐Valerolactone: from Carbon Dioxide and 1,3‐butadiene to Functional Polyesters

Ring‐opening Polymerization of 1,4‐oxathian‐2‐one and Its Copolymerization with Δ‐valerolactone

One‐pot Orthogonal Thiol‐ene Click Polymerization and Ring‐opening Grafting Reaction of CO 2 ‐based Disubstituted Δ‐valerolactone

Ring-Opening Polymerization of CO2-Based Disubstituted δ-Valerolactone toward Sustainable Functional Polyesters.

Ring-Opening Copolymerizations of a CO2-derived δ-Valerolactone with ε-Caprolactone and L-Lactide

Diphenyl Phosphate/ethyl Diphenylphosphinite As an Efficient Organocatalytic System for Ring-Opening Polymerization of Ε-Caprolactone and Δ-Valerolactone

Isomerization Cationic Ring-Opening Polymerization of CO2-Based Disubstituted-δ-Valerolactone

Ring-opening Polymerization of Cyclic Esters Mediated by Zinc Complexes Coordinated with Benzotriazo-Based Imino-Phenoxy Ligands

Polyester Platform with High Refractive Indices and Closed-Loop Recyclability from CO2, 1,3-Butadiene, and Thiols

Bifunctional and Recyclable Polyesters by Chemoselective Ring-Opening Polymerization of a δ-Lactone Derived from CO2 and Butadiene

Ring-Opening Polymerization of Α-Diazo Lactones: Access to Diazo-Containing Polyesters and Their Post-Polymerization Modifications